Showing 1516 items
matching patents
-
Mont De Lancey
Irons, 1875
Early examples of Mrs. Potts' irons. First patented in 1871. These irons were in sets of three - with one interchangeable handle.2 metal irons with a metal and bakelite interchangeable handle. "Mrs. Potts' iron pat. Oct 18, 1875." "Mrs. Potts' iron pat. Oct 18, 1875/No./Pat. ground." irons, laundry irons -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Cannula, infertility, c1969
Part of the laparoscopy equipment donated by Dr Geoff Bishop. Dr Geoffrey Bishop, whilst at the Department of O and G, University of Liverpool, UK, began laparoscopy in 1969. On returning to Australia, Bishop and Grimwade together with Mr Peter Paterson introduced gynaecological laparoscopy to Melbourne, practising at the Queen Victoria Memorial Hospital (QVMH), Melbourne in 1969. The College, through the Victorian State Committee of the Australian Council, RCOG, ran training courses in laparoscopy for local and interstate gynaecologists. These were conducted by Bishop, Grimwade and Paterson. They established protocols, with particular reference to safety, for the conduct of laparoscopy. Laparoscopy was used initially for diagnosis and for limited treatment using diathermy for conditions such as endometriosis. The real impetus came with the great upsurge of tubal sterilization in the early 1970s. Early techniques included diathermy and division of the Fallopian tubes using the Palmer forceps. [Dr Peter Renou, former honoury curator.]This cannula has two points for tubal attachments at one end. At yhe other end, a bell cap with a nossel.This was used by Dr Geoff Bishop during gynaecological laparscopioc surgery. This instrument is commonly used for suction. Also, for testing tubal patency by inserting dye through it. Manufacturers stamp: PRECIOUS.laparoscopy, tubal ligation, infertility investigation -
Dutch Australian Heritage Centre Victoria
Road Map, Nederland
Cleverly folded 1:250,000 road map produced in Dutch, French, German and English containing not only the Dutch road network but also much information of interest to tourists. It is enclosed in a brown imitation leather cover that closes with a stud. Optimal ease of use through patented Falk folding mode.Falk Plan. Road Map. Netherlands. Repeated in Dutch, French and German. -
Anglesea and District Historical Society
Ironing Wax, 1908
"Mother's" ironing wax; cardboard, blue and white beeswax inset covered over by muslin; with instructions on back. Patent September 8, 1908 - relates to pads for waxing smoothing-irons - insuring uniform distribution of wax, preventing waste of wax, avoiding any danger of fire. (See details attached.).PERFUMED MOTHER'S IRONING WAX. USED IN A MILLION HOMES THE WORLD OVER BY MOTHER / NO OTHER / TRADE MARK / U.S. PAT. OFFICE / PAT. SEPT 8TH, 1908 Back: Instructions for use - English French, Italianironing, wax -
Maldon Vintage Machinery Museum Inc
Guillotine, 14 - 12 - 1909
Free standing large guillotine operated by a hand lever, patented 14-12-1909. Melbourne agents S. Cooke Proprietary Limited. Large hand wheel on top small one in front under plate, etched with parallel lines and ruler (brass) in inches. Made of metal, painted black.In relief on side, "2310". Plates on front with agents and makers details.trades printing machinery -
Yarrawonga and Mulwala Pioneer Museum
Camera - Folding, Eastman Kodak, Special Kodak No. 3A model A
USA Patents - September 25, 1894 to September 8 1898 June 21 1898 to January 1908. April 29 1908.For a camera that is over 100 years old it is in relatively good condition -
Mission to Seafarers Victoria
Functional object - Cigarette Lighter, c. 1950
Possibly acquired by seafarer Mr Arthur Dixon who served in WW2 merchant vessels. The origin of the lighters appears to be Austria and could have been acquired either during or post his war service. Initial research indicates an approximate date of 1950s for date of manufacture.See Donor details 1727-1737.2 Small, cylindrical, fluted, polished, stainless steel cigarette lighters, with flint action. Includes a flint gauge in the ignition unit. Runs on lighter fuel, with inbuilt wick. Accompanying bronze coloured metal case of flints. Manufacturer name embossed on body. Lid incised with cylindrical grip of 4 ridges. Lighter1: PATENT/BORA/EXTRA/MADE IN/AUSTRIA (stamped alongside body of lighter) Lighter2: PATENT/Made/in/Austria/902. At right angles at base of lighter, REL Flints: Thorens (stamped in brand name logo style on body at right angle to lid)cigarette lighters, smoking accessories, arthur dixon, bora cigarette lighter, arthur oswald dixon, sailors, seafarers, seamen, officers, smoking, lighters, bora -
Upper Yarra Museum
Racket, Wooden press, Alexander Patent
rackethttp://www.utas.edu.au/docs/library/companion_to_tasmanian_history/A/Alexander%20Patent%20Racket%20Company.htm extract..The Alexander Patent Racket Company made sporting equipment, notably the world's first laminated tennis racquet. In the early 1920s Alfred Alexander invented the process, patented it and began making racquets. In 1926 the Company was formed and production expanded at the factory in Wentworth Street, Newstead. Success depended on the use of imported English ash Wooden press with 1 fixed side. The racket slides in and the frame is tightened with a wing nut. This was used to store the rackets as the laminated wooden frame warped due to pressure of the strings and damp conditions. racket wooden press alfred alexander alexander patent racket company -
Robin Boyd Foundation
Document - Invention, Clement Hack, Hector Crawford Productions, Sound Illustrator documentation, Dec-59
There are three parts: (i) A letter from Hector Crawford to Robin Boyd (8 December 1959) confirming agreement regarding production rights, profits and use of Robin Boyd's invention of the 'Sound Illustrator', plus a letter from Clement Hack and Co (Patent Attorneys) to Hector Crawford (10 December 1959), confirming lodgment of Patent Application for ‘Sound Illustrator’ in the joint names of Robin Boyd and Hector Crawford Productions. (ii) a document 'Specification of Patent Application' (7 December 1959) provides a detailed description of its operation (five pages).The invention is an "apparatus for producing synchronised audio-visual effects" (iii) Penleigh Boyd, Robin Boyd's son, has provided an explanatory illustration of the apparatus. The South Illustrator was designed by Robin Boyd for the presentation of The Flying Dogtor television series.Typewritten, foolscap, 5 pages includes covers, plus additional explanation of apparatus.The letter (i) is countersigned 'Confirmed Dec 9, R.' in Robin Boyd's handwriting.hector crawford, the flying dogtor -
National Wool Museum
Book, Catalogue of Parts for the Hollingworth and Knowles Patent Openshed High Speed Fancy Loom
"Catalogue of Parts for the Hollingworth and Knowles Patent Openshed High Speed Fancy Loom" - Hutchinson, Hollingworth and Co. Ltd Loomworks, Dobrcross, 1898.DYER & PHILLIPS PTY. LTD. / 75-77 FLINDERS LANE / MELBOURNE. / SOLE AGENT.textile machinery, dyer and phillips pty ltd hutchinson, hollingworth and co. limited, weaving looms, weaving machinery -
Ballarat Tramway Museum
Pamphlet, The Forest City Electric Co. Limited England, "Collins Patent Automatic Point Turner", c1940's?
Yields information about the types of automatic point Turing mechanisms used on tramway systems, not actually used in Ballarat or Bendigo.Four page Pamphlet or Brochure Forest City No. 19, "Collins Patent Automatic Point Turner". Four page printed brochure with illustrations 1940’s? describing the Point turning mechanism with illustrations, of the equipment, method of operation advantages, wiring, the street box and curb (kerb) control box. c1940's? Has “217” in biro in bottom left hand corner.trams, tramways, forest city signals, level crossings, signals -
Tennis Australia
Racquet, Circa 1942
A Wilson, English Type Squire racquet, with Wilson patented leather handle grip, and slender, rounded stem. Inscription along right side of stem: PRIDE OF CRAFTSMANSHIP AND FINEST/MATERIALS CREATED THIS SUPERB RACKET. Materials: Wood, Gut, Ink, Leather, Metal, Glue, Lacquer, Paint, Plastic, Adhesive tapetennis -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Kitchen Equipment, Mechanical Cake mixer c 1890, c1880
A mixer is a kitchen utensil which uses a gear-driven mechanism to rotate a set of beaters in a bowl containing the food to be prepared. It automates the repetitive tasks of stirring, whisking or beating. Mixers for the kitchen first came into use midway through the nineteenth century; the earliest were mechanical devices. The mixer with rotating parts was patented in 1856 by Ralph Collier a tinsmith in Baltimore, Maryland .This was followed by E.P. Griffith's whisk patented in England in 1857. A circular tin used for mixing batters. The 2 beaters are of wire, with metal gears, suspended from a metal strip that fits over the tin bowl. and is clamped into place by a metal screw . A crank handle with a wooden black knob attached by a screw is turned by hand to mix the batter in the base. This tin could be secured to a table by a clamp and screw. cooking, kitchen equipment, dairy, cakes, housework, early settlers, pioneers, baking, nutrition, blacksmiths, market gardeners, cake mixers, moorabbin, cheltenham, bentleigh, brighton -
Warrnambool and District Historical Society Inc.
Medical aid, J.E. Garratt, London, Massage tool, Early 20th century
This medical aid was popular in the late 19th and early 20th centuries. It was used as a massaging and vibratory tool and was recommended for the relief of all sorts of complaints, including colds, digestive complaints, rheumatism, headaches, female hysteria, tumours, lung diseases and even ‘double’ chins.This massager is of considerable interest as a medical aid that was popularly used to treat many kinds of ailments in the late 19th and early 20th centuries. It is indicative of the popularity at that time of vibratory or massaging objects that were used to aid in the relief of many ailments for which there were few other remedies at the time.This is a medical instrument with a metal shaft in three sections and a circular piece of metal at the end. The metal piece has a turning handle at one end and a cross metal piece at the other end. This cross piece has a metal cup with a covering piece of stiff rubber at one end and a circular piece of rubber at the other end. At one end of the metal shaft is a wooden handle. Some of the metal is rusted and the rubber ball has been split.‘Vee Dee Patent No….’ ‘1…2…3…’ ‘J. E. Garratt, London 124 Southwark Street S.E.’ antiquarian medical aids, history of warrnambool -
Nhill Aviation Heritage Centre
Memorabilia - Refueling Torch
These torches were used for night time refueling aircraft. Aircraft have been refueled at Nhill since the first landing field was established in 1921. Owned by Bullen Bros , of Nhill, who for a number of years had the refueling contract for the aerodrome.Alloy cylindrical body with screw on lens and switch assembly. Lens has a metal cross protector strip and a locking tag and pin. GEC Safety Torch, Cat No. L6060 patent pending, certified by Mines Dept & Home Office, Made in Englandtorch, refueling torch, safety torch, bullen brothers, refueling -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Kitchen Equipment, 'Vulcan' vitamizer, c1940
A machine fitted with sharp blades, for mashing, crushing or liquefying food ingredients. i.e vitamizing. The jug, made of glass, steel, aluminium or plastic, contains rotor blades that engage with a bit protruding from the base containing an electric motor. When activated by the switch on the base the sharp rotor blades chop, mix , mince, pulverize the ingredients in the jug . The degree of mince depends on the time the motor is running. The jug is easily removed from the base to pour the mixed ingredients where needed and the rotors are safely and easily cleaned by rinsing under water.c1940, an electric, 'Vulcan' Vitamizer, with the original cloth covered flex and bake-lite lever switch at front of the cream bake-lite base . The jug- shaped chrome blender has a red, thick, rubber lid. Front: : Vulcan / LM1 Base ; VULCAN / TYPE LM1 / Patent Pending Design / Volts 220 Amps 8vitamizer, food preparation, cooking, vulcan pty ltd australia, moorabbin, bentleigh, cheltenham, ormond, housekeeping -
South West Healthcare
Instrument - Canister, anaesthetic, 1906-1978
1 Glass bottle marked to 300 CC. 1 Regulator fitting with accessory adaptors."ETHER", "300 C.C". Hand written, "ETHRANE" "THE BRITISH OXYGEN Co LTD" "LONDON ENGLAND" "PATENT NO 536536" ether, surgical equipment, surgery, anaesthetic, british oxygen company -
National Wool Museum
Blueprint, Sowden's Patent 4x4 Drop Box Loom with open shed dobby
Blueprint of part of a "David Sowden and Sons" 4x4 Drop Box Loom. It was among items from Yarra Falls Mill.Blueprint of part of a "David Sowden and Sons" 4x4 Drop Box Loom.SOWDEN'S PATENT 4X4 DROP BOX LOOM/WITH OPEN SHED DOLBY T & I H /Kent GWNtextile machinery weaving, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving -
Whitehorse Historical Society Inc.
Container - Beecham Pills
Beecham Pills were used as a laxative.Round box used for Beecham PillsBeecham's Pills/Patent Pills/Price 1s.11/2d./Sold by the Proprietor/St. Helens Lancashire, England.medicine, pharmacy -
Trafalgar Holden Museum
Tool - Horse clippers, Circa 1900
Used in the grooming of horses Circa 1900As imported and Sold by Holden and FrostCardboard box used for the presentation of Clarks horse clippersClarks patent No.1 Horse Clippers. On Clippers handle W. Clarke Ltd Late 528 Oxford Streetclippers, equine, general -
Bendigo Historical Society Inc.
Functional object - Washing Machine
Patented RapidWash plunger design with attached wringer. These machines significantly reduced the effort required to launder heavy items compared with hand-washing in a tub.A metal tub 44 centimetres diameter and 50 high supported by three legs that are 24 centimetres long. A metal bar extends 27 centimetres above the tub and has a 66 centimetre long metal bar attached by a hinge, above the middle of the tub this bar has a hinged attachment with a 24 centimetre long metal bar on ii which has a 38 centimetre wide and 24 centimetre high metal conical plunger with a fluted apron on the end of it. The plunger is forced up and down the tub by the lever action of the 66 centimetre bar. A water outlet is in the bottom of the tub. There is a piece of wood six and a half centimetres by two centimetres by 45 centimetres attached to the tub which would have supported a ringer.THE LEHMANN COMPRESSED AIR AND VACUME WASHING MACHINE PAT No 30614/30lehmann, washiing machine, laundry equipmenr -
Flagstaff Hill Maritime Museum and Village
Furniture - Ironing board, 1910-1930
Ironing is the use of a machine, usually a heated tool (an iron), to remove wrinkles from fabric. The heating is around 180–220 °Celsius, depending on the fabric type. Ironing works by loosening the bonds between the long-chain polymer molecules in the fibres of the material. While the molecules are hot, the fibres are straightened by the weight of the iron, and they hold their new shape as they cool. Some fabrics, such as cotton, require the addition of water to loosen the intermolecular bonds. Many modern fabrics developed in or after the mid-twentieth century require little or no ironing. Permanent press clothing was developed to reduce the ironing necessary by combining Wrinkle resistant polymers with cotton. The first known use of the iron for removing wrinkles in clothes is known to have occurred in China, and the electric iron was invented in 1882, by Henry W. Seeley. Seeley patented his "electric flat iron" on June 6, 1882 (U.S. Patent no. 259,054). On 15 February 1858 W. Vandenburg and J. Harvey patented an ironing table that facilitated pressing sleeves and pants legs. A truly portable folding ironing board was first patented in Canada in 1875 by John B. Porter. The invention also included a removable press board used for sleeves. In 1892 Sarah Boone obtained a patent in the United States for improvements to the ironing board, allowing for better quality ironing of shirt sleeves.A domestic item with an interesting history of development, significant as it shows the progress and the evolution of a domestic item designed to make housework more efficient.Wooden Ironing board with press board for sleeves, board is folding.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, flagstaff-hill-maritime-village, domestic item, ironing board, ironing, clothes, wrinkles in clothes, henry w. seeley, w. vandenburg and j. harvey -
Tennis Australia
Racquet, Circa 1900
A wooden racquet, with a slotted, fishtail handle. Inscription along neck and stem of obverse: VENUS. Inscription across neck of reverse: HARRY C. LEE & CO/NEW YORK. Inscriptions featuring manufacturing and patent details situated along the sides of the stem. Materials: Wood, Glue, Lacquer, Ink, String, Gut, Metaltennis -
Tennis Australia
Racquet, Circa 1915
A wooden, slotted handle racquet. Inscription along neck of obverse: UNIVERSITY. Inscription across neck of reverse: HARRY C. LEE & CO/NEW YORK. Inscriptions featuring manufacturing and patent details situated along the sides of the stem. Materials: Wood, Glue, Lacquer, Ink, String, Gut, Leather, Paint, Metaltennis -
National Wool Museum
Letter
Letter from Edwrd Waters & Sons, Patent Attorneys, 1949, to W R Lang re. R M Poole invention of a process for scouring wool.wool processing wool - research, scouring, lang, dr w. roy poole, r m, wool processing, wool - research -
Bendigo Historical Society Inc.
Functional object - BILL ASHMAN COLLECTION: SCALEBUOY PIPE
Scalebuoy. Invented by Hartley Abbott and patented under the name of the Bendigo Electronic Company, made in various sizes & for different applications, such as to prevent scaling in the boilers at mines. Scalebuoy case is a 57 long cylinder 13 centimetres diameter with two pipe fittings coming from it. Each end of the cylinder is removable. sciences, scalebuoy, bill ashman collection -
Warrnambool and District Historical Society Inc.
Administrative record - Lance Patent Pan Company Letter Book, late 19th century and early 20th century
This letter book contains letters written by representatives of the Warrnambool Lance Patent Pan Company to agents in Western Australia during the period 1896 to 1913. This company was formed to market the Lance Patent Cess Pan produced by George Lance in Warrnambool. The Western Australian venture did not prove profitable for the company. George Lance was a Warrnambool plumber and gasfitter who produced the Eureka Pump and the Lance Patent Cess Pan. The latter sold widely in Victoria with the Warrnambool Council owning 1700 of these pans in 1896. George Lance was also prominent in Warrnambool as a musician, artist (eleven of his works are in the Warrnambool Art Gallery)and local history writer. He was also involved in the development of the Warrnambool Mechanics Institute and the establishment of the Warrnambool School of Art and Design and the Warrnambool Art Gallery. This letter book is of considerable interest as it gives details on one aspect of the George Lance invention of the Patent Cess Pan (its marketing) and George Lance played an important role in Warrnambool's late 19th century history.This is a letter book of 506 pages. It has a hardboard cover with a mottled red pattern and red binding on the spine. The pages contain an alphabetical index and copies of letters handwritten in black ink. There are many blank pages. The letter book cover is torn at the edges.george lance patent cess pan -
Federation University Historical Collection
Equipment - Stereoscope, Keystone, KEYSTONE PARAGON BIRDSEYE & TIGER MAPLE STEREOSCOPE, c1895
The 'Paragon' was Keystone's first patented stereoscope. Keystone View Company of Meadville, Pa., was the world's largest producer of stereographs and was in business from 1892 to 1970 on a limited basis. The company was founded by Benneville L. Singley who at one time worked for Underwood. Singley photographed many of the views sold by Keystone. Keystone would eventually purchase almost all of their competitors. The remains of the Keystone Company are housed at the University of California. Singley filed for 2 patents for stereoscopes, the first in 1898, about the time Keystone started producing them. C. L. Pappenhagen, an employee of the company filed for 4 patents for a total of 6 for the company. Here are some examples of the many forms of hand held stereoscopes produced by Keystone. (http://home.centurytel.net/s3dcor/Keystone/Keystone.htm) Timber stereoscope reader with brass fittings, used for viewing stereoscopes (Stereoscope cards contain two separate images printed side-by-side to create three-dimensional illusion)stereoscope, photography, illusion -
Tennis Australia
Racquet, Circa 1937
A stemless wooden racquet, featuring an open, three-pronged throat connecting the head directly to the handle. Head, and outer prongs are reinforced by fibreglass bands, decorated with red and gold ribbon strips. Upper inside of outer prongs also reinforced with fibreglass strips. Inscription across the base of the head, on obverse: RED. Manufacturer's trademark decal features at central prong on obverse. Inscription on inside of right prong: MADE IN ENGLAND BY/HAZELLS LTD. LONDON. Decal inscription on the outside of right prong features worldwide patents. Decal inscription on outside of left prong: HAZELL'S STREAMLINE/REGD. & PATENTED. Company monogram on butt cover. Materials: Wood, Gut, Leather, Metal, Ink, Glue, Lacquer, Ribbon, Fibreglass, Nylontennis -
Tennis Australia
Racquet, Circa 1937
A stemless wooden racquet, featuring an open, three-pronged throat connecting the head directly to the handle. Head, and outer prongs are reinforced by fibreglass bands, decorated with green and gold ribbon strips. Upper inside of outer prongs also reinforced with fibreglass strips. Inscription across the base of the head, on obverse: GREEN. Manufacturer's trademark decal features at central prong on obverse. Decal inscription on the outside of right prong features worldwide patents. Decal inscription on outside of left prong: HAZELL'S STREAMLINE/REGD. & PATENTED. Company monogram on butt cover. Decal inscription across base of head on reverse: FINNIGANS/LTD./SPORTS DEPT./LONDON & MANCHESTER. Materials: Wood, Gut, Leather, Metal, Ink, Glue, Lacquer, Ribbon, Fibreglasstennis