Showing 159 items
matching british pattern
-
Bendigo Military Museum
Container - BISCUIT TIN, c.1939 - 1945
Tin contains large quantity of RAF, RAAF badges of rank. Trade badges. Buttons, brass & dark. Belt buckles plain brass, British coat of arms, darkened. Stored in a biscuit tin, rectangular shaped with corners flattened to make an octagonal. The lid has a still life scene of 6 tomatoes & a blue patterned, gold topped jug. Sides have a wavy mesh appearance of two tone blue.Printed in small black letters on lid near bottom edge: “Persimmons”numismatics-badges-military, containers - domestic, metalcraft, raf, raaf -
Kiewa Valley Historical Society
Tin Tobacco, Mid to late 1900s
The British Australasian Tobacco Co. (based in Melbourne and Sydney. The parent company was founded in England, circa 1902). This item "HAVELOCK" is one of many ready rubbed tobacco tins produced by the British Australasian Tobacco Company.The ready rubbed tobacco held within the tin was mainly used by those smokers who rolled their own cigarettes. These smokers would have mainly used their palm and formed a cup then placing their choice of the amount of tobacco to be rolled. This would then be placed on the fine cigarette paper and rolled and sealed (using saliva in the mouth) into the required shape. There were mechanical "roll you own" gadgets on the market but most rural users, especially males used their palms. The quantity of tobacco used to make up the cigarette was up to the individual user. The thinner that the cigarette was rolled the longer and more economical did the supply last. The by -products of this method were nicotine stained fingers and hands. "Chain" smokers were easily identified and could therefore be discriminated against obtaining smoke sensitive employment. The two world wars (1914-18 and1939-45) produced a significant rise in the consumption of cigarette use by men and the eventual overflow to women. Cigarette smoking before the 1900s was seen as rough and uncouth (socially frowned upon), however after the introduction of overseas films (U.K. and U.S.A.) and film stars presenting smoking as socially acceptable, the rise of smoking cigarettes, especially roll you own (American western movies) in rural areas was an accepted way of life. Things however started to change in the mid 1900s when medical evidence pointed to the health problems of regular smokers. Governments were now implementing non smoking education material. Restrictions on where and when smoking was permitted and acceptable started to creep into all areas of society whether city or rural. This was the era that highlighted the use of roll your own cigarettes, especially when the costs of "tailor made" cigarettes were taxed at an increasing amount. Roll your own cigarettes also provided an avenue for the consumption of illicit drug use.The significance of this ready rubbed tobacco tin to this rural region is, stems from how much influence that the Western novels and overseas films (portraying rural lifestyles) played in shaping the rural social and working mores of the Kiewa Valley. The post war depression (financially) resulted in more smokers turning away from expensive machine (tailor) made cigarettes to the roll your own, using ready rubbed tobacco. This tobacco tin relays a long ago era, when personal contact, and not something that has been written down by some "unknown", was valued as the true appraisal of a member of the community. This was especially relevant in a small regional area such as the Kiewa Valley. Although social networking was not as fast then as the internet provides now, appearances, manners, fashion and etiquette with first impressions high on the order of evaluating someone in the community. Pointer such as the brand of tobacco smoked was part of the rural assessment method. Up until the demise of the Australian Tobacco Industry, circa 2004, the Kiewa Valley and surrounding district was part of a vibrant producer of tobacco leaves. The remnants of this industry still remain today but the drying sheds (for tobacco leaves) are now used to store hay for the valley's dairy and beef cattle industries.This tobacco tin is constructed from tin plated thin rolled steel. The lid is attached by two pressed and formed (from the main frame) hinges using the nip and tuck construction method.The lid and outside frame have had a green "weave" pattern anodised to the metal.On the outside of the lid and at the top left is stamped, in gold coloured letters "HAVELOCK". The bottom of the lid is stamped (in smaller script) "READY RUBBED TOBACCO" and below this in smaller lettering "2oz NET WEIGHT WHEN PACKED". On the rim of the lid is "THE BRITISH AUSTRALASIAN TOBACCO CO. PTY. LTD." Inside of the lid and stamped in black print on a gold anodised lid is "Every tin of genuine HAVELOCK Ready Rubbed Tobacco has the mane Havelock printed on the paper lining, and also on the band or wrapping sealing the tin. On the hinge side of the lid is "HAVELOCK READY RUBBED"roll your own, cigarette tins, smoking accessories, personal effects, tobacco containers -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Uniform, about 1960
The 4/7 Royal Dragoon Guards was formed in 1922 as a British Army cavalry regiment. In 1992 it was amalgamated with the 5th Royal Inniskilling Dragoon Guards to form the Royal Dragoon GuardsThe 4/7 Royal Dragoon Guards is a British Army unit associated with the 4/19 Prince of Wales's Light Horse RegimentBritish Army Uniform No 2 Dress 1980 Pattern, 4/7 Royal Dragoon Guards. With Regimental badges and buttons, white lanyard and General Service Medal ribbon. No badges of rankOn maker's label - "Baldwin"uniform, 4/7 rdg -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Flag - King's Colour, 5th Battalion AIF, 1919 (estimated)
King's Colour - 5th Battalion AIF. Silk material. Design is of 'Great Union' flag as commissioned by the UK military (from the College of Arms) specifically for use on colours. The saltires of St Andrew and St Patrick are of the same width (4.5 inches) with a fimbriation added as in the original of the 1801 pattern Union Flag. The St George cross is 9 inches wide. All fimbriations are 1/2 inch. ww1, military, world war 1, silk, colours, heraldry, 5 battalion, 5bn, king s colours, sir ronald munro fergusson, 2 5 battalion, board, 3 military district, laid up, union flag, st george, st andrew, st patrick, college of arms -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
bandolier
Designed from the experience of the British Army in the Anglo Boer War 1899-1902 for infantry and mounted troops. Bandolier included as part of the 1903 Pattern Bandolier Equipment ensemble. Dismounted troops very quickly rejected the Bandolier Equipment and it was replaced by the 1908 pattern Infantry web equipment. Australian horse mounted troops continued using the 1903 Bandolier equipment til they exchanged their horses for motorised vehicles in the early 1940's These bandoliers were worn by soldiers of the 4th, 17th, and 19th Light Horse Regiments and their precedent untis from c. 1905 to c.1942. Current 4/19th soldiers wear a bandolier styled on this bandolier when carrying a lance in Parades.Bandolier, 1903 pattern, 90 rounds mk. 2. Leather, Veg. tan, colour brown, brass buckles studs and triangle.M. A. RISK 1915 (Manufacturers mark and date of manuf.)leather, bandolier, 1903, accoutrements, equipment, 9 pockets -
Frankston RSL Sub Branch
Webbing, Belt, No maker discernible, Unknown
Used with dress uniform for ceremonious purposes.An example of the standard issue webbing belt used by Australian service personnel. The name "Bretterecker" and the number 360053, (possibly a post World War 2 service number) is written in black ink on the inside surface of the belt. The belt has been "blackened" for ceremonial use and has brass fittings, the 2 angled buckles normally located on the rear of the belt have been removed. The 1937 pattern equipment (also known as '37 webbing') was an item of military load-carrying equipment. Pattern 37 replaced the 1908 Pattern and 1925 Pattern—on which it was based—and was standard issue for British and Commonwealth troops from its introduction in 1937, throughout World War II, and in the post-war period until it was superseded by 58 pattern webbing. The design was confirmed on 8 June 1938 and wide-scale issue began in 1939. Towards the end of World War II, some 37 Webbing was produced in jungle green for troops fighting in the Pacific Theatre, although purpose-made 44 Pattern Webbing was then introduced for the humid jungle conditions, being lighter in weight, quicker drying, and rot-proofed.[ Although 44 Pattern continued in use with the British Army for jungle warfare in its various post-World War II colonial conflicts, it did not replace 37 Pattern in general service, which was in use up until the introduction of 58 Pattern. However, 37 Pattern was used for ceremonial purposes and still issued to Cadets in the 1990s. 1937 Pattern Webbing was made from cotton webbing, which was waterproofed and dyed before being woven. The fittings were made of stamped brass and it was produced by various manufacturers.Written in black ink on the inside "Bretterecker" and the number 360053, possibly a post World War 2 service number.webbing belt, dress webbing -
Warrnambool and District Historical Society Inc.
Book, Bridge and how to play it, 1901
This book belonged to the Warrnambool solicitor, Con O’Mahony (1863-1920). In 1883, he won the University of Melbourne Bowen Prize for his essay on the Federation of the Australian colonies. His prize, ten volumes of the ‘Lives of the Chancellors’, is today in the possession of the Warrnambool and District Historical Society. O’Mahony had a legal practice in Warrnambool in the Royal Chambers in Kepler Street at the end of the 19th century and the beginning of the 20th century. He was initially in a partnership with Messrs E.W. Klingender and Murray, then ,when this partnership was dissolved, he continued the business under the name of O’Mahony and later O’Mahony and Murray. He was actively involved in the management of the Warrnambool Mechanics’ Institute and was a member of the Warrnambool Hospital committee. The item here described shows O’Mahony’s interest in bridge-playing, a popular pastime at that time. This book is of some significance as it belonged to Con O’Mahony, a well-known lawyer in Warrnambool in the early 1900s. It also shows the interest in bridge-playing as a pastime during that period. This is a small hard cover book of 112 pages. It was published in 1901(eighth edition) and contains seven chapters on how to play bridge, a scoring table and an index. The last three pages are advertisements for other books on bridge. The cover is yellow with the title of the book, the author’s name and the publisher on the front cover contained within a scroll pattern with four coloured images of the four kings from a pack of cards. The back cover has a list of the British Chess Handbooks published by George Routledge & Sons Ltd. The pages have been annotated (presumably by Con O’Mahony, the Warrnambool solicitor) and some sentences and headings have been underlined.Four stamps – one of ‘May 24 1902’ and three of ‘C.O’Mahony, Solicitor, Warrnambool’.bridge-playing, con o’mahony, warrnambool -
Warrnambool and District Historical Society Inc.
Book, Odhams Press Ltd, The story of 25 Eventful years in Pictures, early 20th century
A collection of photographs of events of the years from 1911 to 1935. It shows many world wide events such as events around Worls War 1,sports events such as horse racing and cricket,scouting, flights over Mt Everest, fashion the fall of the tzars in Russia and other world events such as the vote for women. . It is mainly a British perspective with a number of items relating to the royal family and British politics of the time.This book has historical and social significance as it records in photographs many events which occurred in a very turbulent period of world history. While it has no direct link to Warrnambool it would have been of general interest to local people.Blue cover with silver print on front cover and spine. Front cover has embossing in a floral pattern.Inside front and back covers the paper is patterned in silver and blue with crowns and flags.512 pages with mainly photographs in sepia colours.the story of 25 eventful years in pictures, -
Warrnambool and District Historical Society Inc.
Document, Service of Thanksgiving, 1918
This is a programme of the Warrnambool City Council Civic & Thanksgiving Official Service on November 1918. The service was held in the Warrnambool Botanic Gardens, conducted by the Ministers of the Churches in Warrnambool and led by the combined choirs of the churches. It was a public occasion held to offer thanksgiving for the end of World War One in November 1918. One of the hymns sung had the opening lines: ‘O God of Love, O King of Peace/Make wars throughout the world to cease’. The service was attended by the Mayor of Warrnambool and the City Councillors and Council employees. World War One was a signal event in the history of Warrnanmbool (as it was for all places in Australia) with so many young men volunteering for active service and so many dying overseas.This programme is of great interest as it records an important occasion in Warrnambool – the end of World War One and the official service of thanksgiving that commemorated this happening. This is a programme for the Warrnambool City Council Civic & Thanksgiving Official Service in November 1918. It is a sheet of buff-coloured paper folded in two to make four pages. There is blue printed material on three of the pages. The front page has the City of Warrnambool crest printed in blue with blue edging on the page and some ornamental patterns. The inside pages has a blue sketch of the flags of Australia and Britain. The programme is faded and creased and a little blotched.warrnambool city council, history of warrnambool, world war one -
Warrnambool and District Historical Society Inc.
Album - Giles family photograph album
This album contains a number of photographs of British royal family, ministers of religion persons of renown such as Florence Nightingale and family members. Most are named.This album contains a typical collection of photographs which people of the later part of the 19th century put together of people of importance, especially the royal family and leaders of state. Religion also played a major part in the lives of people at that time hence the inclusion of the ministers. Small green leather bound cover with geometric pattern. Two metal clasps. Edges of pages edged in gold. First page is photograph of page from the Book of Proverbs snd last photo is of prince Alfred with ships in the background.warrnambool, photograph album of warrnambool -
Warrnambool and District Historical Society Inc.
Album - Family photo album, Photograph album, Circa 1954
This album shows a collection of photographs some of which are labelled as Munster Services Club. Some show the Bookshop at the TOC H building. There are photos of soldiers in parade drills and in training exercises as well as social events. One is labelled D Craven & Rab, Munster 1954. Another is labelled London bus 2 RTR Munster. The 2 RTR was a tank regiment in the British Army and was stationed at the Swinton Barracks in Munster from 1952-1959. There are also a number of loose photos showing local scenes such as London Bridge and Needle Rock at Childers Cove. Others depict floats in a parade showing Peace Woollen Mill. Others are small postcards of MaryBorough and Brisbane Queensland. There is also a photograph of the Nestanglo basketball team, Victorian champions circa 1940’s. This collection of photographs has limited local relevance as there is limited provenance. However it depicts quite well the activities of the RTR and their activities in Munster in the post WW era.Brown and fawn snake skin patterned card cover with fawn cord binding. Photographs written in gold on front cover. Pages are brown card. Photographs are black and white.Munster Services Club.warrnambool, swinton barracks munster, munster services club 1952-1959, 2rtr munster -
Warrnambool and District Historical Society Inc.
Household, American Safety Razor Company, Shaving kit, Mid 20th century
Safety razors were fist produced in the late 1800s by the Star Razor Company in U.S.A. and it was a former employee of this company that produced the Gem Safety Razor in 1898. The Gem razor, to be produced in later years by the American Safety Razor Company, became one of the world’s most popular razors and in the 20th century it was the major competitor to the Gillette razor produced in the U.S.A. The safety razor has been largely superseded by the disposable razor blade and the electric razor. This safety razor has no known local provenance but it is retained as an example of the type of safety razor used in households for the most part of the 20th century.This is a silver-coloured Gem safety razor in a rectangular green Bakelite box. The box lid has metal pins acting as hinges and inside the box there are moulded sections to ensure the razor fits snugly into the box. The razor handle has an etched decorative pattern and the top part opens so that a blade can be inserted. There is a blade in this section. On box: ‘Gem’ Blade: ‘Gem Double Life, Gem Blade, British Made’ Inside the razor: ‘Gem Brooklyn New York Made in U.S.A.’ gem safety razor, history of warrnambool -
Warrnambool and District Historical Society Inc.
Model Boat, H. Richter, Cutty Sark, 1964
The Cutty Sark sailing ship was a popular model-making ship. It was a British clipper ship built originally for the China- England tea trade and was one of the last and fastest tea clippers. From 1883 to 1895 it was used to carry wool from Australia to England and held many records for speed during that time. Since 1954 the ship has been on display at Greenwich, England. The model has an etched inscription indicating that it was made by Herman Richter and so it is presumed that he was the maker of this model. A model of the Cutty Sark was made by his father, Edward Richter using wood from the Enterprise wrecked in Lady Bay and that model was in the old Warrnambool Museum. This information was in a newspaper article at the time of Edward Richter’s death. This Herman Richter model may be a copy of his father’s model. The Richters have been prominent in Warrnambool’s history, beginning with Henry Richter who came to Warrambool in the 1850s and worked in the Western Brewery and was licensee of the Royal Archer Hotel. His son Edward who died in 1937 was a prominent Warrnambool resident for 78 years. Herman, the son of Susan and Edward Richter was well-known as a model boat maker and maker of model boats in bottles.This model boat is of great interest because the ‘Cutty Sark’ was a well-known sailing ship and was important in Australia’s maritime history as a carrier to London of Australian wool in the 1880s and 90s. It is also of interest as it was made by a member of the Richter family, a prominent one in Warrnambool’s history with both Edward and his son Herman Richter producing many artefacts connected to Warrnambool’s history – model ships, violin-making, maritime paintings etc. This is the model of a three-masted ship with a hull painted in green and black with gold bands. The ship is mounted on a wooden stand and enclosed in a wooden box with a glass front. The box is varnished and has ornamental patterns in gold and blue on the top and sides. The inside of the box is painted blue and white to represent the sea and the sky.‘Cutty Sark 963Tons by H Richter 1964’richter family, warrnambool, model boat building -
Warrnambool and District Historical Society Inc.
Book, Elizabeth Craig, New Standard Cookery Illustrated, 1933
Advice and recipes on home cookingA book of 1015 pages . The dark blue cloth cover has embossed patterns on the front cover with gold edging and gold printing on the spine. There is slight staining on the front cover. The pages contain printed text, and coloured and black and white photographs.non-fictionAdvice and recipes on home cookingcookery books, 1930's cookery book, warrnambool -
Warrnambool and District Historical Society Inc.
Medal, Stokes, Visit of Prince of Wales 1920, 1920
This medal was issued to commemorate the visit to Australia of the Prince of Wales in 1920. The visit was primarily an expression of thanks by the Royal family in Britain to the people of Australia for their involvement and support during World War One. This particular medal was produced to mark the visit of the Prince of Wales to Geelong.This medal has no known local provenance but is retained for display purposes.This is a round bronze medal. The obverse side has an image of the Prince of Wales in uniform with printing around the edges. The reverse has a coat of arms with decorative patterns and leaf fronds and printing. The medal has a loop and a metal ring at the top for attachment to a ribbon or a cord.H.R.H. Prince of Wales Welcome to Australia Stokes To Commemorate the Visit of H.R.H. Prince of Wales to Australia Geelong June 1920 world war one, history of warrnambool, prince of wales -
Warrnambool and District Historical Society Inc.
Accessory - Umbrellas, Early 20th Century
These umbrellas are typical of the ones women would have used early in the 20th Century. It was important to keep the rain from damaging their clothing as washing facilities were limited. .These umbrellas are charming and retained for display purposes..1 An umbrella with a wire frame and a wooden handle. The frame is tipped with ivory coloured composite material. The handle has a red tassel. The covering is a multi coloured cloth with a pink edge. The inner section has a cream background with pink and light brown leaves, branches and flowers. The outside is faded. .2 An umbrella with a black wire frame and a wooden handle. There are tips on the end of the frame. The handle is varnished and ornamented red and black. It has a string tassel in red, white and blue and a corded wrist band. There is writing on the frame. The covering is corded rep with a multi-coloured floral pattern and has a faded, wide navy edging..2 BRITISH MADEumbrellas, vintage clothing -
8th/13th Victorian Mounted Rifles Regimental Collection
Uniform - Uniform 2/8th AR, 1945 circa
Worn by VX45541 Lieutenant Louis A Jackson who served with 2nd/8th Armoured Regiment in Australia and New Guinea during WWII. Following its return from New Guinea in 1944, 2nd/8th Armoured Regiment had a change of role and was redesignated Numbers 41, 42 and 43 Landing Craft Companies and served in Pacific Islands till the end of the war. In 1947, Louis Jackson joined the Citizen Forces (CMF) and served as a captain in the 8th/13th Victorian Mounted Rifles. This uniform is a well provenanced, representative example of WWII clothing as worn by an officer of an armoured regiment. Service dress winter jacket with 37 pattern webbing and belt, and revolver holster. Jacket has lieutenant rank insignia, 'Australia ' metal shoulder titles, 'Rising Sun' collar badges, colour patches of 2nd/8th Armoured Regiment AIF, ribbon bar for 39-45 Star, Pacific Star, British War Medal 39-45 and Australian Service medal 39-45. Overseas service chevrons on right sleeve.uniform, 2/8th armoured regiment, jackson -
Tennis Australia
Racquet, Circa 1965
A Dunlop, Rod Laver, Grand Slam tennis racquet, with ribbon whipping around shoulders, which are enamel painted along with throat and shaft, and leather handle grip with patterned perforations. Model name features along throat and shaft, accompanied by decal images of the flags of U.S.A., Great Britain, Australia, and France. 'D' trademark in arrowhead device, above Dunlop logo, features across base of the shaft. Dynamic 'D' trademark features on butt cover. Materials: Wood, Nylon, Ribbon, Ink, Leather, Glue, Lacquer, Metal, Enamel, Adhesive tape, String, Plastictennis -
Kew Historical Society Inc
Collection, Helen Bushell Kite Collection, c. 1975 - 2017
Kites created by Helen Bushell, Kew resident for many years, and a pioneer of kite-flying world-wide. Kites are hand-made, mainly by Helen, and many were flown in local parks of Kew. Documents provide some background to the collection, and a set of photographs, which was used in an exhibition at Hawthorn Arts Centre, help to identify the kites and where they were flown. Individual items include: 2019.0047.01 - Make Mine Fly, Vol. 1 - book of instructions for making kites fly 2019.0047.02 - School Kites - book of 14 kite designs 2019.0047.03 - Helen Bushell Reaching for the sky (exhibition catalogue, 2017) 2019.0047.04 - Hansard (Victoria) Documents - statement by Natalie Hutchins, Minister for Local Government 2019.0047.06 - "Evolution" Trefoils - collection of advertisements for kites for sale 2019.0047.05 - Kite event badges on blue cotton sash (20 badges and name-tags) 2019.0047.07- Kite honours and B.A. Deakin plus Original Patents (Australian, British and U.S.) 2019.0047.08 - Helen Bushell, 1922- A Life in Kiting (28 panels mounted on board, showing photographs of Helen Bushell's kites, for exhibition in Hawthorn Arts Centre, 2017) 2019.0047.09 - 1986 Year of Peace Dove - paper pattern (15 copies + dowel rod) 2019.0047.010 - "Peace Dove" pattern August 1995 2019.0047.011 - Collection of drawings, patterns, poem, newsletters, etc. 2019.0047.012 - "Small birds" paper patterns 2019.0047.013 - Remake of old head "Fluted Sled" 2017 HB: nylon kite in heavy cotton bag 2019.0047.014 - Long yellow tail suitable for Rainbow Serpent 1992 2019.0047.015 - Long blue tail for Rainbow Serpent 1992 2019.0047.016 - Moth c. 1975 2019.0047.017 - Hand-held peace dove (used for Helen Bushell's memorial 2017) 2019.0047.018 - "Song for Bill" kite 2019.0047.019 - 7-point clown kite Kites and associated documents belonging to Helen Bushell have local significance for Kew, as many were flown in the area. They have artistic significance in their representation of Australian indigenous, Chinese, New Guinea and other cultural symbols. Among the documents are poems, books on kite-flying written by Helen Bushell, badges and cards from international conferences, and Australian, British and American patents for kite design. One kite shows an aerodynamically-designed keel which helped to improve safety for hang-gliders.Australian Kite Society, Helen Bushell collection of kite-related material, including kites, photographs, documents, badges, etc.australian kite society, helen bushell -
Buda Historic Home & Garden Castlemaine
Domestic furniture, Arts and Crafts embroidered draught screen, c1900
This screen with embroidered and appliqued panels was entered in the First Australian Exhibition of Women's Work 1907, at the Royal Exhibition Building in Melbourne. This landmark exhibition gave women artists and craft workers an opportunity to display their works to a broad audience and gain recognition for the variety and high standard of the works in both traditional and non-traditional fields for women. The embroidery and applique design is based on an original design for a similar object made by British Arts and Crafts Architect and Designer, M.H. Baillie-Scott, which was published in The Studio magazine in the early 1900s,This three-panel draught screen was made by Hilda Leviny in the Arts and Crafts style and entered into the First Exhibition of Women's Work, at the Exhibition Buildings, Melbourne in 1907.Arts and Crafts style three-panel draught screen made from timber(American Oak), linen panels, silk embroidery threads, beaten copper decoration and varnish. The embroidered panels, made by Hilda Leviny, are mounted within the timer framework, depicting a design of birds and trees in the Arts and Crafts style. Pattern Reg. No. 3227.2 and 2503. With copper decoration.hilda leviny, buda, castlemaine, domestic furniture, handcrafts, needlework, art nouveau, 1907, exhibition of women's work, royal exhibition building, woodwork, draught sceen, arts and crafts movement, embroidery and applique -
Chiltern Athenaeum Trust
The Wells of Beersheba - book publication by Dalby Davison and Mahony, 1933
The Wells of Beersheba is a short romanticized account of the Battle of Beersheba, which took place on 31 October 1917 in Ottoman Palestine during the First World War between the attacking mounted infantry of Australia and New Zealand and the defending Ottoman garrison. It was written by the Australian author Frank Dalby Davison who was not present at the battle, but had been in the British cavalry during the war. Much of the book, which is more fictionalized reportage than novella, and in which no single character is drawn, reflects the codependency of horse and rider and the shock of battle. This booklet was first published in 1933. It was originally published in Sydney in 1933 by Angus & Robertson under the title The Wells of Beersheba. An Epic of the Australian Light Horse 1914-1918, with illustrations by Will Mahoney. WW1 semi-fictional association with the Battle of Beersheba - 4th Light Horse Brigade Australian Infantry Forces. October 1917. Ottoman Empire Palestine. Booklet titled "The Wells of Beersheba" by Frank Dalby Davison and illustrated by Will Mahony. Semi Cardboard Cover with parchment paper internally. The cover has a light rose colored pattern surrounding the title, author and illustrator details. Front cover has title "The Wells of Beersheba" and author Frank Dalby Davison with illustrator Will Mahony. There is a light rose colored pattern on the front cover. the wells of beersheba - charge of the 4th light horse brigade., book - the wells of beersheba, ww1 battle of beersheba october 1917. -
Wangaratta Art Gallery
Textile, Christine Upton, Gum Blossoms, 1989-1992
The inks used were fabric printing inks and two colours were applied at the one time on the same roller, the roller being inked with green on one side and red on the other. The roller was a sponge paint roller 100mm wide. The technique used was 'soft bed release'. This is where the fabric is placed over a soft bed (woolen blanket with cotton overlay) and the inked block is placed on top of the fabric, then body weight is applied to the back of the block by placing the hands on the block and transferring weight through the body and into the hands. The block is then lifted and the process starts allover again.Rural City of Wangaratta CollectionA repetitive pattern of gum blossoms that has been printed on a rectangular piece of pure silk twill in green and red ink by a lino block.wangaratta art galley, print, lino block, flora, gum, christine upton, textile, australian flora -
National Wool Museum
Book, Woolcraft: a practical guide to knitting and crochet
This book and a number of others like it were owned by the mother and aunts of the donor, Mrs Dorothy Boyle. They were prolific producers of hand knitted and hand made items of clothing and also knitted and sewed for the armed forces during the Second World War. This book was produced by Patons and Baldwins and contains instructions on how to knit and crochet, as well as patterns.WOOLCRAFT / A PRACTICAL GUIDE TO / KNITTING & CROCHET / PATONS & BALDWINS LTD. / (Incorporated in Great Britain) / MELBOURNE and SYDNEY / 1/- / PUBLISHED WITH ALL RIGHTS RESERVEDknitting handicrafts - history crochet, patons and baldwins (australia) ltd, knitting, handicrafts - history, crochet -
Puffing Billy Railway
Double Headed Rail, circa 1872 - 1883
Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway. -
Wangaratta RSL Sub Branch
Swagger Stick, c1863
This swagger stick belonged to Private Ernest LUCAS who served with the Royal Defence Corps between 17/6/1907 and 18/5/1919 including the 6th Battalion Middlesex Regiment In the British Army before World War I, swagger sticks were carried by all other ranks when off duty as part of their walking out uniform. The stick took the form of a short cane of polished wood, with an ornamented metal head of regimental pattern. The usual custom was for the private soldier or NCO to carry the stick tucked under his arm. Until 1939 swagger sticks were still carried by peacetime regular soldiers when "walking out" of barracks but the practice ceased with the outbreak of World War II. The 6th Battalion Middlesex Regiment can trace its history back to 7 August 1760 as part of the Middlesex Militia. In 1778 it was titled the 1st East Middlesex Militia. By royal order the regiment was later designated the Royal East Middlesex Militia on 24 April 1804. By 1855 it was using the formal title of "1st or Royal East Middlesex Regiment of Militia". In 1900 the number of regular Middlesex Regiment battalions was doubled with the formation of a new the 3rd and 4th battalions; and the two militia battalions were renumbered as 5th and 6th battalions of the regiment. The unit's standing orders of 1863 record the regimental insignia as being somewhat unusual, in that it did not include standard royal crown, but featured a five-pointed Saxon Crown atop a shield with the arms of the East Saxon Kingdom i.e. three stylised Seaxes hilted and pommeledpLong narrow round cane made from polished reddish/brown wood with brass metal tip and embossed silver topSilver metal top embossed with a crown above a shield inscribed 6th Battalion Middlesex Regtswagger stick, 6th battalion middlesex regiment, private ernest lucas -
8th/13th Victorian Mounted Rifles Regimental Collection
Weapon - Bayonet 1907 pattern
... melbourne Bayonet 1907 pattern Weapon British model 1907 bayonet ...This pattern bayonet was used by Australian troops in World War One and Two and the Korean War. British model 1907 bayonet with leather scabbard - overall length 550mmMA 1907 x MA 4 42wwi, wwii, korea, australian -
Kew Historical Society Inc
Clothing - Maltese Lace Chemisette, 1900s
The Fashion & Design collection of Kew Historical Society includes examples of textiles dating from the 18th, 19th and 20th centuries. Some of the textiles, were used as items of clothing, others as items of household decoration, or simply as travel souvenirs. These textiles were created both domestically and internationally. Predictably with the growth of an ethnically and culturally more diverse community in Kew after the Second World War, textiles, clothing and objects in the collection inevitably reflected this diversity. This form of bobbin lace is made in Malta. It is a guipure style of lace. Maltese lace is worked as a continuous width tape lace on a tall, thin, upright lace pillow called a "Trajbu" and the Bobbins are called "Combini" . Bigger pieces are made of two or more parts sewn together. Lace made in Malta was originally needle lace, from the 16th to the 19th century, when the economic depression in the islands nearly led to the extinction of lacemaking there. But in the mid 1800s, Lady Hamilton Chichester sent lacemakers from Genoa to Malta. They used the old needle lace patterns and turned them into bobbin lace, which was quicker. It was not long after its introduction that the Maltese lace developed its own style from Genoese lace. Maltese lace was shown at The Great Exhibition of 1851 and it became popular in Britain. The style was copied by lacemakers in the English Midlands, and it was one of the sources for Bedfordshire lace. Characteristics of Maltese lace. Maltese lace usually has the following characteristics which are useful for identification. It is usually made from cream silk. There is often the 8 pointed Maltese cross as part of the pattern, worked in whole or cloth stitch.The pattern may also have closely worked leaves known as “wheat ears” or “oats”. These are plump and rounded in shape, rather than the long narrow leaves of other types of bobbin lace. Camisole, made of silk thread Maltese bobbin lace that is constructed of lengths of lace forming two rectangles with a hole for the neck. Shows the characteristic Maltese cross and wheat ears. Fabric is made of tape lace joined togethercamisoles, maltese lace, bodices -
Kew Historical Society Inc
Leisure object - Magnetic Toy, Fishing, 1950s
The Kew Historical Society’s collection includes a wide range of leisure objects. Many of the items are European-made, generally of British origin, however there are a number that were made for the Australian market by Australian manufacturers. There were clearly a huge range of toys produced for the Australian and International children’s market in the Nineteenth and Twentieth centuries. The examples of toys in the collection include examples of alphabet toys, arcade toys, baby toys, construction toys, dolls, doll accessories, educational toys, soft toys, tin toys, toy animals, toy blocks, toy machines, toy typewriters, etc. Four miniature paper fish that have multicoloured stripes. Each fish has a piece of metal in its mouth. The other part of the game is two tiny wooden fishing rods with cotton attached to metal rods. The aim of the game is to attach a rod to a fish. The six items are stored in an orange and green patterned cardboard box that is probably not original.games, magnetic toys -
Flagstaff Hill Maritime Museum and Village
Ceramic - Chamber Pot, 1912
In the 19th and early 20th centuries, J. & G. Meakin were important, large-scale producers of good quality, ironstone tableware (‘White Granite’ ware) that met a ready market in the United States, South America, Australia, and other traditional British markets. By the 1890s the company was one of the world’s largest earthenware manufacturers. Although export teaware and tableware was the factory’s staple commodity, Meakin also manufactured toilet ware, kitchen ware and a wide range of fancy earthenware. The company was amongst the first British pottery firms to experiment with modernist designs associated with the art deco period. The Moderne' range was introduced in 1929 consisting of an angular shape decorated design with geometric patterns and often highlighted with silver or gold. This range remained in production through the 1930s. Post 1945 the company introduced the streamlined Studio shape (1953) and Horizon shape (1955) both heavily influenced by the Russell Wright ‘American Modern’ tableware. In 1964 a new Studio shape was released with tall streamlined coffee pots used as the background for many contemporary patterns now associated with the 1950s and 1960s. Designs by Jessie Tate and Eve Midwinter, some originally found on Midwinter shapes, also appear on 1970s Studio ware. The Studio range was one of Meakin’s most successful and continued in production until the late-1970s. The enormous range of floral, geometric, and abstract designs make Studio Ware collectible in its own right. In the 1970s and 1980s as part of the Wedgwood Group Meakin produced contemporary products under the ‘Bull in a China Shop’ and ‘Creative Tableware’ names. ‘Sol’ (c.1912-1963), ‘Studio’ (1953 on) and ‘Royal Staffordshire’ (post 1968) were important J. & G. Meakin Ltd trade names. Meakin marks are numerous, but all include the J. & G. Meakin name. The significance of this item and pottery generally is that often earthenware is portrayed as being a landmark in the evolution of humanity. This is because these items are the few things from the past that have survived in a tangible form. Pottery is an important functional part of society and it has a critical role to play as it helps archaeologists to date other artefacts of the same time period. Also, the decorations on pottery have told much about the beliefs, lifestyles and lives of the people who bought them and used them. In other words it gives us today a snapshot of society from the past and how people used these items in their daily lives, their likes as well as societal and design trends. Earthenware white glazed ironstoneJ & G Meakin Hanley England stamped to base, with white flora designwarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pottery, earthenware, iron stone, alfred meakin, james meakin, george meakin, earthenware manufactures, chamber pot -
Flagstaff Hill Maritime Museum and Village
Compass and Sundial, Mid 19th Century
... the middle 19th century on supplying the British military. This items ...James Henry Steward (1817–1896) established J.H. Steward in London in 1852. As “Head Optician” he would have been a qualified oculist but little is known about the founder’s early life and scholastic achievements. However, given the variety of disciplines for which he undertook he was also an accredited instrument maker,he clearly was a gifted scholar and quickly gained professional recognition in a full range of fields for an instrument maker of his day. J.H Steward became incorporated as J.H. Steward Limited on 1st February,1913. The business grew from modest beginnings. Steward would sell pocket watches and assorted items at the annual competition days of "The National Rifle Association of the United Kingdom(NRA)" from a stall. As the governing body for full bore rifle and pistol shooting sports in the UK. The Association established in 1859 with the aim to improve the shooting skills of the newly formed corps of volunteers to meet the perceived threat of an invasion by the French. J.H. Steward advert first appeared in the NRA competition program of 1865. The NRA meetings were held at first on Wimbledon Common, Surrey until 1889. Then because of pressure by the local community, the NRA along with its buildings and its flourishing meetings moved further south to Brookwood, Surrey. By now the Steward operation had grown from a modest stall into a large marquee selling various optical and scientific instruments at these meetings. Throughout its long trading history the J.H. Steward company and many members of the family maintained strong ties to the NRA and competition shooting events. The NRA records show that at the end of the 19th century the NRA bestowed a Life Membership on 7 Steward family members. First presented by J. H. Steward Ltd. in 1902 was the “Steward Trophy” that is still an annual competition for teams of four from any rifle club affiliated to the NRA. There is also evidence that many family members were fine shots.The item was made by a significant instrument manufacturing company that concentrated during the middle 19th century on supplying the British military. This items pattern & design is still available as a reproduction, available on the internet. However this original seems unique as the writer cannot find another for sale or in a collection to date. The assumption is that this type of compass was made for the British artillery units given the sun dial. Further research is ongoing as the writer regards this item as rare and social significant.Brass Compass and Sundial manufactured by J H Steward 407 & 406 West Strand, London. Can be used in both hemispheres. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, compass, sundial, combination compass and sundial, steward strand london, j h steward