Showing 964 items
matching the restoration
-
B-24 Liberator Memorial Restoration Australia Inc
Plaque, 1981
Included in the collection of Bill Bakker ex RNEIAAFRAAF Plaque presented to Bill Bakker1921-1981 Aircraft Depot RAAF Providemus, Queen's Colour Presentation 6 November 1981a23.04 -
B-24 Liberator Memorial Restoration Australia Inc
Plaque, 1985
Included in the collection of Bill Bakker ex RNEIAAFPlaque presented to Wilhelm H. Bakker and Mrs Anne Bakker by RAAF Association, Victorian Division.AFA - Presented to Wilhelm H. Bakker, Past President - RAAF Association, Victorian Division and Mrs. Anne Bakker on the occasion of their visit to Florida, USAF Association (Florida State) August 1985.a23.05 -
B-24 Liberator Memorial Restoration Australia Inc
Silver Plate
Included in the collection of Bill Bakker ex RNEIAAFRound Silver Plate presented to William Bakker, State President, Victoria Chapter, Australian Air Force Association.William Bakker, State President, Victoria Chapter, Australian Air Force Association from 49th Fighter Group San Francisco, Ca. July 1980. Presented by M/G Dr Hutchinson USAF Retired.a23.06 -
B-24 Liberator Memorial Restoration Australia Inc
Photograph of Bill Bakker
Included in the Collection of Bill Bakker ex RNEIAAFColour photograph of William (Bill) Bakker in frame.a23.07 -
B-24 Liberator Memorial Restoration Australia Inc
Black and White Photographs of Bill Bakker
Included in the collection of Bill Bakker ex RNEIAAFBlack and white photograph of a young Bill Bakker. Black and white photograph in a frame of Bill Bakker.a23.08 -
B-24 Liberator Memorial Restoration Australia Inc
Photocopies of Log Sheets
Included in the collection of Bill Bakker ex RNEIAAFPhotocopies of Bill Bakker's Flying Log Sheets - June, September, October, September, September.a23.09, bakker -
B-24 Liberator Memorial Restoration Australia Inc
Silver Gillette Shaver
Includeed in the collection of Bill Bakker RNEIAAFSilver Gillette Shaver in plastic container used by Bill Bakkera23.10 -
B-24 Liberator Memorial Restoration Australia Inc
Brown Leather Business Card Holder, 1939
Included in the collection of Bill Bakker RNEIAAFBrown Leather Business Card Holder belonging to Bill BakkerRoyal Australian Air Force 1939-1945 Europea23.11 -
B-24 Liberator Memorial Restoration Australia Inc
Air Force Association Badge
Included in the collection of Bill Bakker RNEIAAFBlue and Gold Air Force Association Badge (Bill Bakker)Air Force Associationa23.12 -
B-24 Liberator Memorial Restoration Australia Inc
Dutch Post Card
Included in the collection of Bill Bakker RNEIAAFDutch Post Card written in Dutch by Bill Bakkera23.13 -
B-24 Liberator Memorial Restoration Australia Inc
Brown Leather Document Holder
Included in the collection of Bill Bakker ex RNEIAAFBrown Leather Document Holder (poor condition) belonging to Bill BakkerImprint of Horsea23.16 -
B-24 Liberator Memorial Restoration Australia Inc
Certificate of Merit - Bill Bakker
Included in the Collection of Bill Bakker ex RNEIAAFCertificate of Merit in Frame - Bill BakkerAustralian Flying Corps and RAAF Association Certificate of Merit Presented by Federal Council to William M. Bakker as a mark of Appreciation and Recognition of Service to the Association. Federal President Howard, Federal Secretary Peter Alexander. Dated 3 November 1974.a23.17 -
B-24 Liberator Memorial Restoration Australia Inc
Plaque 49th Fighter Group
Included in the collection of Bill Bakker ex RNEIAAFPlaque In frame presented to Bill Bakker49th Fighter Group W.M. Bakker Distinguished Guest 1980 3 Cloth Badgesa23.18 -
B-24 Liberator Memorial Restoration Australia Inc
Photograph of Japanese Surrender on Morotai, 1945
Witnessing the Japanese surrender and signing of Peace Document on Morotai 1945.During WWII Vern Roberts was an LAC Fitter 2A (airframe) in RAAF 24 Squadron. He was stationed on Morotai at the time of the Japanese surrender. All personnel on Morotai at the time were required to attend the parade to witness the signing of the Peace Document. Vern had with him the camera his mother had given him when he left Australia to serve in the RAAF. He carried that camera and used it throughout his war service in the Northern Territory and on Morotai. Vern took the pictures of the ceremony, now on display with his camera. General Sir Thomas Blamey signed the Surrender Document on behalf of the Allied Forces.a17.1 -
B-24 Liberator Memorial Restoration Australia Inc
Aircraft, B-24 Liberator, Consolidated Aircraft Corporation, c. 1940
This particular aircraft was modified with a search radar in the lower fuselage to help locate and track targets and was then redesignated as a B-24R model. The RAAF took A72-176 on charge in late 1944 and this saw it issued to 7 OTU (Operational Training Unit) based at Tocumwal, south west NSW. The training saw bomber crews learn how to fly the bomber, operate as a team and work with fighters. Towards the end of the war there were up to 50 aircraft located at Tocumwal along with 5000 personnel. A72-176 was noted as flown on training missions by various aircrew.This aircraft is one of the only remaining B-24 bombers in the southern hemisphere and 1 of only 8 remaining B-24 airframes still existing in the world, out of the nearly 19,000 which were originally built. The restoration honours the contribution of one of the RAAF’s main bombers of the WWII era. This restored Liberator aircraft was assembled from parts salvaged from B-24M models, manufactured during the 1940s in the USA. Made from aluminium, the plane is 68 feet long, with a wingspan of 110 feet, and is metallic silver with a distinctive blue and white target design on each side. The aircraft is powered by four wing-mounted engines, and is fitted with 10 heavy machine guns.Registration number on side of fuselage at rear of plane: 'A72-176' Inscription on side of fuselage at front of plane: 'ROYAL AUSTRALIAN AIR FORCE / US ARMY B24-10 CO / AIR FORCES SERIAL NUMBER 44-41956' aircraft, liberator, bomber, wwii -
B-24 Liberator Memorial Restoration Australia Inc
Bubble sextant, Henry Hughes & Son, c.1930s
These instruments were used on aircraft to obtain the altitude of the sun or other celestial body to aid navigation. This particular one came from a former RAAF pilot.This bubble sextant, complete with original wooden storage case with leather strap, was manufactured c.1930s. Black and metallic, it has a mirror in the middle, various knobs on the sides and a cylindrical handle on each side.sextant, altitude, navigation, instrument -
B-24 Liberator Memorial Restoration Australia Inc
Radar Antenna, c. 1945
Airborne radar was developed as WWII progressed; it only started to become really useful nearing the war's end.Radar Antenna (Dish), forms part of the S.C.R. 717c search radar fitted to RAAF Liberators. It is an early microwave airborne pulse radar.The antenna designation is RC266radar -
B-24 Liberator Memorial Restoration Australia Inc
Airspeed Oxford aircraft (Replica under construction), c.1940
This type first flew in 1937 and by the start of WWII it was the preferred aircraft in all Empire Air Training Schemes for multi-engine pilot training. By the beginning of WWII the Airspeed Oxford was the preferred aircraft in all Empire Air Training Schemes for multi-engine pilot training. As of April 2014, no Airspeed Oxfords remain in the world in airworthy condition and there are very few complete air frames. There are reportedly some restoration-to-fly projects underway, one in New Zealand.Full-sized replica of an Airspeed Oxford aircraft. This type of aircraft was described as a multi-engine three-seat advanced military trainer monoplane. It was a wooden construction using plywood and fabric covering and powered by two 375 HP Armstrong Siddeley Cheetah 10 engines. Parts originally used a base for this reconstruction were reckoned to be from an Oxford Mk 2 with registration A25 LX181 which was based at Point Cook and used extensively in training from the Werribee Aerodrome. -
B-24 Liberator Memorial Restoration Australia Inc
Armstrong Siddeley Cheetah Engine
Some 37,200 of these engines were built, major application was in the Airspeed Oxford aircraft.Seven-cylinder air cooled radial engine produced by Armstrong Siddeley (UK). Widely used in Airspeed Oxford and Avro Anson aircraft of WWII era. This example is in running order after having been rebuilt by team members from a very neglected state.A9600 8739D 790 Sradial engine -
B-24 Liberator Memorial Restoration Australia Inc
Tail Plane from 'Little Eva' crash, Circa 1941/2
Commemoration of the crash of USAAF B-24 Liberator #41-23762 'Little Eva' of the 321st Squadron, 90th Bombardment Group based at Iron Range. Crashed near Burriejell waterhole at Moonlight Creek, Escott Station in far north Queensland on 2 December 1942. Two of the ten crewmen were rescued by the manager of Escott Station after 13 days of deprivation.2bxThe tail plane/fin from the crash site of Liberator 'Little Eva'. This site is registered as Doomadgee Queensland Australia, approximate GPS Co-ordinates: Latitude -17 56 24 Longitude +138 49 47.Faded USAAF Insignia 41-23762little eva, 4123762, usaaf -
B-24 Liberator Memorial Restoration Australia Inc
S.C.R 522 VHF Radio
Also know as T.R 5043 in RAF and RAAF usage. Very widely used Very High Frequency Transmitter/Receiver operating in the 100 to 150 MHz range. This equipment is very heavy for the low power output (8 to 9 watts) weighing in at 22 kg and another 16 kg for the associated Dynamotor power supply. Physical size 2bx -
B-24 Liberator Memorial Restoration Australia Inc
Link Trainer, c.1950
The instrument Flying Trainer Type D4 MK1 (Link Trainer c1950) is an electrical, mechanical and vacuum operated motion simulator. It was used by the RAAF as ground equipment in teaching all phases of elementary and advanced instrument flying.link trainer -
B-24 Liberator Memorial Restoration Australia Inc
AN-APR 4 Auto Scanning Radar Counter Measures Receiver
This equipment was used to detect and analyse enemy radar transmissions. A piece of radio equipment very typical of the time, aluminium with circular glass display screen. -
B-24 Liberator Memorial Restoration Australia Inc
Pratt & Whitney R 1830 Radial Engine (Informational Entry)
Between Pratt & Whitney and numerous licensed companies, there were over 180,000 of these engines manufactured in a number of specifications. The B-24 Liberator would have been their major recipient but other famous aircraft using the same engine were the Consolidated Catalina flying boat and the Douglas DC3/C47/Dakota. Refer Wikipedia link for other aircraft that used this engine.As a result of the significant and ongoing usage of these engines in civil aircraft such as the Douglas DC3, they are by no means rare. Many parts can still be sourced new and there are several companies that have the capacity to rebuild these engines to an airworthy standard.The Pratt & Whitney R 1830 is a double row 14 cylinder air cooled radial engine with a capacity of 1830 cubic inches (30 litres), developing some 1200 horsepower at a maximum 2700 rpm.radial engine, twin wasp, r1830 -
B-24 Liberator Memorial Restoration Australia Inc
Pratt & Whitney R 1830 Radial Engine, 722
This engine was used by RAAF 21 Squadron personnel to manufacture and fit up exhaust systems and had been left standing for a long time without any preservation treatment. Much effort was put in to free up the motor and after it had been made to turn, checks by borescope showed some fretting had occurred in the cylinder bores. This was deemed not serious enough to warrant a strip down. It did need repairs to the ignition looms and various other adjustments but first started on the 16 July 2009. Various fuel problems were evident and repairs have been done and it now runs very well. All parts used in getting this motor to run successfully came from the fund's own stock or parts included in other purchases. The Pratt & Whitney R 1830 is a double row 14 cylinder air cooled radial engine with a capacity of 1830 cubic inches, (30 litres), developing some 1200 horsepower at a maximum 2700 rpm.Engine Number 722 -
B-24 Liberator Memorial Restoration Australia Inc
Pratt & Whitney R 1830 Radial Engine, 54828 (CAC)
This engine was a Commonwealth Aircraft Corporation (CAC) build, and had been upgraded to 92 specification at some time. This engine as acquired, was completely seized and great difficulty was encountered in dismantling it. The pistons in Nos 1, 13, 3, 2 and 5 had "grown" into the cylinder bores requiring some unorthodox methods to remove them. The cylinder barrels have been brought up to a reasonable standard, those beyond repair were replaced from stock. After getting various parts from the US, this engine was eventually brought up to running order.The Pratt & Whitney R 1830 is a double row 14 cylinder air cooled radial engine with a capacity of 1830 cubic inches, (30 litres), developing some 1200 horsepower at a maximum 2700 rpm.Engine Number 54828 -
B-24 Liberator Memorial Restoration Australia Inc
Pratt & Whitney R 1830 Radial Engine, 361184
Early experience resulted in this motor being partially dismantled to investigate load knocking when turned over on the starter motor. Subsequently it was discovered that the "noise" was normal, a unique aspect of the 1830 engine. The engine was then re-assembled to an operational state using parts from stock.The Pratt & Whitney R 1830 is a double row 14 cylinder air cooled radial engine with a capacity of 1830 cubic inches, (30 litres), developing some 1200 horsepower at a maximum 2700 rpm.Engine Number 361184 -
B-24 Liberator Memorial Restoration Australia Inc
Australian World War II silk map of Celebes, 1940s
Silk and rayon maps were produced by Australia, Great Britain (some 1.75 million in total) and the United States (c.7.5 million) during World War II. They were issued to Allied military personnel as part of 'escape and evasion' kits.This silk map, one of relatively few produced in Australia (most Australian RAAF pilots and crew were issued with British and US maps), is an original map from World War II.An oblong, cream colour, single-sided map printed in black and white with brown contours, Celebes 'Prepared under the direction of RAAF Headquarters' Celebes (with Insets 'A' to 'E')world war ii, silk maps, australia, a185 -
B-24 Liberator Memorial Restoration Australia Inc
Australian World War II silk map of Banda Sea, 1940s
Silk and rayon maps were produced by Australia, Great Britain (some 1.75 million in total) and the United States (c.7.5 million) during World War II. They were issued to Allied military personnel as part of 'escape and evasion' kits.This silk map, one of relatively few produced in Australia (most Australian RAAF pilots and crew were issued with British and US maps), is an original map from World War II.An oblong, cream colour, single-sided map printed in black and white with brown contours, Banda Sea Banda Sea (with Insets 'A' to 'E')world war ii, silk maps, australia, a186 -
B-24 Liberator Memorial Restoration Australia Inc
Map - British World War II silk map of Sumatra (South) and Java (Extreme North West), 1944
Silk and rayon maps were produced by Great Britain (some 1.75 million in total), the United States (c.7.5 million) and Australia during World War II. They were issued to Allied military personnel as part of 'escape and evasion' kits.This map, printed on rayon, is an original British 'escape and evasion' kit map from World War II.A multi-coloured, contoured, double-sided map printed on rayon, 1944 Series South West Pacific Area (SWPA) and Asia Sheet G Sumatra (South) and Java (Extreme North West) and, on the reverse, Sheet H Borneo (South West), Java and Sumatra (Extreme South)world war ii, silk maps, great britain, a187