An early Alistair Knox design and build, this home was purchased by George Coop in 1968. Eltham builder, Graham Rose, extended the original Alistair Knox structure over the foundation excavation dug by George. Graham organised the brick walls where required, raised all frame work and laid the steel tray roof. George did all external/internal wall cladding, made all opening windows, sliding and swinging doors, stairs and general interior timber cabinet work. Bedroom wardrobe doors came from scrapped Victorian Railways country coaches. Most of the timbers used in the extension were re-purposed from the Templestowe Cool Store and the Port Melbourne wool, hide & skin store.Digital TIFF file Scan of 35mm Ilford XP1 black and white transparencyalistair knox design, eltham, graham rose, houses, mount pleasant road

An early Alistair Knox design and build, this home was purchased by George Coop in 1968. Eltham builder, Graham Rose, extended the original Alistair Knox structure over the foundation excavation dug by George. Graham organised the brick walls where required, raised all frame work and laid the steel tray roof. George did all external/internal wall cladding, made all opening windows, sliding and swinging doors, stairs and general interior timber cabinet work. Bedroom wardrobe doors came from scrapped Victorian Railways country coaches. Most of the timbers used in the extension were re-purposed from the Templestowe Cool Store and the Port Melbourne wool, hide & skin store.Digital TIFF file Scan of 35mm Ilford XP1 black and white transparencyalistair knox design, eltham, graham rose, houses, mount pleasant road

An early Alistair Knox design and build, this home was purchased by George Coop in 1968. Eltham builder, Graham Rose, extended the original Alistair Knox structure over the foundation excavation dug by George. Graham organised the brick walls where required, raised all frame work and laid the steel tray roof. George did all external/internal wall cladding, made all opening windows, sliding and swinging doors, stairs and general interior timber cabinet work. Bedroom wardrobe doors came from scrapped Victorian Railways country coaches. Most of the timbers used in the extension were re-purposed from the Templestowe Cool Store and the Port Melbourne wool, hide & skin store.Digital TIFF file Scan of 35mm Ilford XP1 black and white transparencyalistair knox design, eltham, graham rose, houses, mount pleasant road

Gold bearing ore is pulverized by cast iron stampers (steam driven) and material then passes over a large copper plate covered in mercury causing the gold particles to combine with the mercury to form an amalgam which is scraped of and placed in a retort. The retort is heated causing the mercury to evaporate leaving the gold to be refined into ingots. The mercury is cooled as it leaves the retort and is reused. A second tray covered in what is called a blanket traps any fine gold that has passed the first plate. Finally the residue material goes over a vibrating table called a Wilfley Table which captures any iron pyrites which may contain about three percent gold. this is roasted and treated to recover any remaining gold at a special treatment plant.Wooden model of a five heads gold stamper battery. The gold stamper battery is a device for crushing ore. The parts of the battery are cams; dies; guides; kingposts; mortar box; shoes; stamps (or stampers); tappets. gold mining, mining equipment, gold stamper

This cruet set belonged to the Orr family of Addington, family of the donor.This is typical of a table condiment set.This cruet set has a diamond-shaped silver plated tray with four knobs for legs. A hoop-shaped frame is screwed underneath and holds four circular frames for holding condiment bottles. The frame has a truncated triangular top. Four crystal cut bottles with a diamond pattern fit into the framework. Two have crystal cut glass stoppers and two have silver-plated lids. One silver lid is hinged and has a spoon hole and the other has many small holes (for pepper?).allansford, orr family, addington, tableware, dining setting, condiments, eddington

Demonstrates how suggestions to Management of the SEC depot were made by tram employees and has a strong association with the tram crews.Sign - made from sheet metal, folded and welded to provide a suggestion box for the Ballarat Tram Depot. Has the word "Suggestions" in large Red capital letters, a large tray or box for receiving the suggestions (not too sure how you got them out without undoing the sign and shaking the items - if any - out) and an area for an instruction to be displayed. Painted both sides in a cream colour (SEC tramway cream). Has two screw holes in the top corners. See Reg 3769 for a booklet on the SEC suggestions Scheme/Has pencil marked on the top horizontal white line "369375 2 ? and 309981 1 ? 18th Oct"trams, tramways, sign, sec, depot, crews

Memento for assistance on the implementation and development of Metcard presented to Kevin Tierney. Introduced c1996. Consists of: Blue box with a internal sliding tray, folded cardboard formed with black eyelets. Black foam wrapper with a yellow string. Memento in the form of a key with a gold finish featuring a Metcard at one end and the handle featuring a train, tram and bus. On rear inscribe on the key end "This Memento is in recognition of your contribution to the development and implementation of Melbourne's new Automated Ticketing System". On the handle end is inscribed the name of the manufacturer - Royal Selangor Pewter.trams, tramways, metcard

VR Commissioner's Special train, steam locomotive D3-639 filling up with water at the coal hopper, Echuca Railway Station, 1962. The tender has been all polished up. THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so.Digital TIFF file Scan of black and white print enlargement on textured paper (14.5 x 21 cm)coal hopper, d3-639, d3-class steam locomotive, echuca railway station, george coop collection, vr commissioner's special train

A group of widows at Legacy House preparing trays of rosemary to be given to the public and worn as a sign of remembrance on Anzac Day. This photo appeared in the June 1997 edition of The Answer. The caption said: "Legacy Ladies making the thousands of rosemary sprigs for the ANZAC Student's Service and ANZAC Parade marchers". The lady in purple is Inez Bruce, the other names unknown. In The Answer in 1995 an articles says: "Operation Rosemary. Since 1982 Legacy ladies have volunteered to make rosemary sprigs for the Anzac Day marchers. At a later date they also made sprigs for the Schools Shrine Service. . . don't worry, there are ladies here to show you how to make them and it's a chance to hav a chat and cuppa whilst you work together. Any day day that you can spare . . . please ring Joan Miller."A record of widows preparing rosemary for the public. Rosemary is sign of remembrance. Colour photo x 2 of three ladies preparing rosemary sprigs.Printing on the back "

Photos of what appears to be a picnic in the bush with Holmbush children and legatees, possibly in the 1940s. The matron is the lady in the hat fanning the fire and is believed to be Dorothy Farmer, names of the children and legatees are not known. There is a tray of cooked sausages and a large pot that had been on the campfire. The last photo shows a tripod of branches that had been erected to hold the pot over the campfire. Also some of the cars that took them on the outing. From a photo album which contains photos of Holmbush and some of the excursions and events that happened there, appears to have been put together in the 1940s. Including trips to the zoo and picnics. Holmbush at 1267 Burke road, was one of the properties that Legacy used for Junior Legatees. It was purchased 1942. In 1957 Holmbush was renamed Blamey House until it was sold in 1977.A compilation of photos of the matron and junior legatees from the Legacy residences on an outing with legatees.Black and white photo x 4 of Matron, children and Legatees on a bush picnic pasted to the page of an album.residences, holmbush, matron, picnic, junior legatee outing

The Brighton - St Kilda Bus lines could issue tickets, as an agent, from St Kilda Railway Station to Melbourne on behalf of the Victorian Railways. These dated tickets represent a sample of these. A group of tickets would be issued to each driver for the day who would issue them in order from his ticket tray or kit. The bus driver did not have a means of canceling a ticket with a date stamping machine. 1 - St Kilda to Melbourne - pink - 20 September 1968 - No. 0270 2 - St Kilda to Melbourne - pink - 14 November 1968 - No. 0540 3 - St Kilda to Melbourne - return - special day return - 11 August 1968 - No. 0034 4 - St Kilda to Melbourne - return - 14 January 1969 - No 0375Demonstrates a railway ticketting system that was used on buses and railwaysSet of 4 Edmondson style railway tickets with printed dates of issue.railways, tickets, buses, victorian railways, st kilda, brighton - st kilda bus lines

The Bell & Howell Ringmaster slide projector was capable of projecting 35mm mounted slides onto an internal screen and then played them much like a television set. Different settings allowed the slides to be projected onto a larger screen if desired. The RingMaster included cassette tape player/recorder that was able to synchronize the playing of sound with the projection of slides. It was compatible with 80 and 140 count Kodak Carousel slide trays which were mounted on the top. A carry handle was attached for the top of the machine for easy transport, Accessories with the projector included an external microphone and cassette tapes. Donald J. Bell and Albert S. Howell founded Bell & Howell Incorporated with a capitalization of $5,000 in February 1907. This projector was used by the Country Fire Authority Training Wing to conduct training and information sessions for its members.This item is significant because it is representative of development in home entertainment in the late 1970s. It was donated by a local organisation in Wodonga.A large cube-shaped projector with a slide carousal which was placed on the top. It included a built-in cassette recorder and an external microphone jack. The front featured a screen allowing slides to be viewed on this screen or projected onto an external screen.On front: Bell & Howell Metal Plate on back: Serial Number 9005079 and Patent informationbell & howell, home entertainment

This socket set was used by a member of the Wodonga community, Mr. Stanley William Flower. Mr. Flower was the father of a life member of the Wodonga Historical Society. The Indestro Company produced these sets from the mid 1920s until the 1960s or beyond, although the peak of their popularity was in the late 1920s and 1930sThis socket set is representative of the tools developed in the 1920s, particularly for convenience and portability. It was owned and used by a Wodonga resident.A set of 8 hex sockets set in a metal tray with a lid. The handle slides into a slot in the casing to secure the sockets in place for easy use. The diameter of each socket in engraved on the side. They were made in the USA and are probably a product of INDESTRO, but the brand is indistinct due to age and tarnishing. The set consists of an Ell-handle, eight sockets, and a screwdriver bit. The socket sizes are 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, and 15/16. The sockets are marked only with the fractional size and "Made in USA."On handle; "PATENTED DEC. 12, 1922socket sets, hand tools, indestro usa

Silver tray or plate - presentation for 25 years service to Jack Pollard, pressed silver plated metal with green rubber base, etched centre scroll work with details of the presentation in the centre. "PUBLIC TRANSPORT CORPORATION PRESENTED TO J. Pollard. IN RECOGNITION OF 25 YEARS OF CONTINUOUS SERVICE TO PUBLIC TRANSPORT". Made by Strachan Australia. See Reg Item 182 for the Photo of the Presentation. Copy print of original by David Pollard. See correspondence (pdf files) for further details of Jack. See also Reg Item 204 for another example.See above.trams, tramways, personnel, presentations, malvern depot, 25th anniversary, ptc, silverware

Rev Marlene Thalheimer was inducted as the first female minister in the Presbyterian Church in 1974.G146.1 Black leather-look hinged box with two clips and a handle at the top. The box is lined with white satin in the lid and blue velvet in the box. The contains: G146.2 communion chalice; G146.3 and G146.4 patens; G146.5 - G146.8 two lidded communion wafer containers; G146.9 plastic communion wafer container with wafers; G146.10 oblong tray with central handle containing G146.11 - G146.18 eight communion glasses. The boxed with fitted out to hold all these items together with a bottle which is missing. The box has two plaques on its front.Plaque on lid: ""PRESENTED TO REV. M.J.THALEIMER WITH APPRECIATION BY ST JOHN'S PRESBYTERIAN CHUIRCH ESSENDON - 1974 - "" Plaque on box: "PRESENTED TO ST JOHN'S UNITING CHURCH ESSENDON - 1991 - BY ROY, HUSBAND OF THE LATE REV. M.J.THALHEIMER A MINISTER OF ST JOHN'S THE FIRST ORDAINED WOMAN MINISTER OF THE PRESBYTERIAN CHURCH OF AUSTRALIA"rev m. j. (polly) thalheimer, st john's presbyterian church essendon, st john's uniting church essendon

Black and white photograph in cream folder with card frame inside. Tray truck with display on back, consisting of large model tomato sauce bottle on box. Brick building in background painted with advertising sign. Inscriptions: in image on wall 'Quick to Quench, Cohn's, est. 1857'. On truck 'Say Cohns Please:, '100 years', 'Cohn Limited, Sw3an Hill', 'Cohn's Tomato Sauce', Truck number plate 'GNA 665'. Hand written BR corner 'Reg V Brock'. Rubber stamp front BR corner, 'Reg V Brock of Bendigo'. History: Prev. Acc. No. MP201topic, transport

belonged to Dorothy Meaghers' motherdonated by Ray Meagher who was a councillor 1972-1979. He was also chairman of works committee 1974-76, and Mayor of Nunawading 1976-77. Rays' wife Dorothy was on lake committee and supported the extension of the lake reserve. Ray was also a local builder.1 rectangular cream coloured tray .2 oval shaped hand mirror with handle, coloured cream .3 narrow oblong cream coloured brush .4 oblong cream brush .5 rounded square cream powder container with raised bump on each side .6 lid for powder container with raised bumps on each side square shape .7square handkerchief with farm animals- blue edged .8 round pink coloured powder puff, dark pink. .9 round pink coloured powder puff, light pink. .10 round circle of nylon meshon cream container 'made in England'personal effects-toilet requisites, cosmetics

Demonstrates domestic items manufactured soon after the establishment of the tramway systems in Ballarat.Ash Tray - white glazed on front, unglazed rear with gold edge trim, light weight China in the shape of a "spade" with an image of the intersection of Sturt St and Lydiard St from the Post Office looking at the buildings on the south side of Sturt St including the Town Hall with two electric trams and the tram lines in the view. One of the trams is hauling a trailer. Possibly made mid to late 1900's. On rear has the makers stamp of "W&R Stoke on Trent" http://nicholnack.com.au/wiltshaw-robinson-patterns/index.php - accessed details that it is the mark of Wiltshaw and Robinson.tramways, trams, ash tray, sturt st, lydiard st, town hall

Two photographs a,b, laminated upon pink cardboard illustrating Easter Fair Floats. [a] Float based upon utility towing trailer in Mitchell St in front of Cliff Morrisons with Hopetown Hotel on right. Numerous placards displayed by adults and children riding on float. Handwritten caption below reads 'Another Mother's Club Easter ' PROTEST' Float. [b] Float carrying fancy dress adults based upon truck tray displaying numerous placards relating to Bendigo Baths protest. Handwritten caption above reads 'Mother's Club- Easter Fair Protest - Mid 1950's.bendigo, institutions, golden square primary school

Before factory production became commonplace in medicine, dispensing was considered an art and pill machines such as these were a vital component of any chemist’s collection. This machine dates back to the days when your local chemist or apothecary bought, sold, and manufactured all his own drugs and medicines to everybody who lived within the local community. In Victorian times, there was no such thing as off-the-shelf medicine. Every tablet, pill, suppository, ointment, potion, lotion, tincture and syrup to treat anything from a sore throat to fever, headaches or constipation, was made laboriously by hand, by the chemist. Pill machines such as these first appeared in the mid-1700s and quickly became a staple of the Victorian chemist’s shop. A ‘pill mass’ of medicinal powders mixed with a binding agent would be hand-rolled into a pipe on the tile at the back of the machine. This would then be placed across the grooved brass plate and cut into equal-sized pills using the corresponding side of the roller. Once all the necessary ingredients for the pills had been measured and ground with a pestle and mortar a final ingredient was poured in, syrup – this acted as a binding-agent. You could then roll it into a sausage shape. The largest part of the machine is the board. This is set at an angle and is comprised of the rolling surface, the cutting grooves, and the collection-tray. The large flat surface is for rolling out the pill-paste into the sausage shape. This is then rolled towards the brass cutting-grooves. The paddle (the second piece) is flipped over so that the grooves there line up with the grooves on the board. Rollers on the ends of the paddle roll against the brass edges of the board, and they guide the paddle straight across the grooves, taking the pill-mass with it. The grooves on the paddle and the board slice up the pill-mass and, after rolling the thing back and forth a couple of times like a rolling-pin, the circular pills roll off the grooves and into the tray at the bottom. https://galwaycitymuseum.ie/blog/collections-spotlight-victorian-pill-making-machine/?locale=en The collection of medical instruments and other equipment in the Port Medical Office is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Pill making device including a grooved base board and grooved sliding board with two pill moulds.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pills, pill maker, medicine, health

Used as tBefore factory production became commonplace in medicine, dispensing was considered an art and pill machines such as these were a vital component of any chemist’s collection. This machine dates back to the days when your local chemist or apothecary bought, sold, and manufactured all his own drugs and medicines to everybody who lived within the local community. In Victorian times, there was no such thing as off-the-shelf medicine. Every tablet, pill, suppository, ointment, potion, lotion, tincture and syrup to treat anything from a sore throat to fever, headaches or constipation, was made laboriously by hand, by the chemist. Pill machines such as these first appeared in the mid-1700s and quickly became a staple of the Victorian chemist’s shop. A ‘pill mass’ of medicinal powders mixed with a binding agent would be hand-rolled into a pipe on the tile at the back of the machine. This would then be placed across the grooved brass plate and cut into equal-sized pills using the corresponding side of the roller. Once all the necessary ingredients for the pills had been measured and ground with a pestle and mortar a final ingredient was poured in, syrup – this acted as a binding-agent. You could then roll it into a sausage shape. The largest part of the machine is the board. This is set at an angle and is comprised of the rolling surface, the cutting grooves, and the collection-tray. The large flat surface is for rolling out the pill-paste into the sausage shape. This is then rolled towards the brass cutting-grooves. The paddle (the second piece) is flipped over so that the grooves there line up with the grooves on the board. Rollers on the ends of the paddle roll against the brass edges of the board, and they guide the paddle straight across the grooves, taking the pill-mass with it. The grooves on the paddle and the board slice up the pill-mass and, after rolling the thing back and forth a couple of times like a rolling-pin, the circular pills roll off the grooves and into the tray at the bottom. https://galwaycitymuseum.ie/blog/collections-spotlight-victorian-pill-making-machine/?locale=enhe companion item to pill-maker base, item 488.2The collection of medical instruments and other equipment in the Port Medical Office is culturally significant, being an historical example of medicine from late 19th to mid-20th century.Pill making device including a grooved base board and grooved sliding board with two pill mouldsNone.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pill making, pill mould, medicine, health

THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so. Image dated as November 1963 based on same image in Port of Echuca collection (possibly frame 32 of film) (print 19.5 x 24.5cm) On reverse in pencil: " K Class at Echuca" Echuca K Class. 1940-1968". In blue pen:" Photo by: George L. Coop Nov 1963" https://victoriancollections.net.au/items/59de9cc421ea6b12dc3f7597Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca railway station, george coop collection, k-158, k-class steam locomotive (vr newport workshops)

Two male teenagers sit at a table covered in a white tablecloth. One is being served by a waiter, who is placing potatoes on his plate from a silver tray, whilst the other sits with his plate complete with potato and other foodstuffs that also look a bit like potatoes in variety of ways. Two glasses sit before the teenagers, as does salt and pepper shakers and a small plate with what looks like half a boiled potato topped with slices of cucumber. In the background another waiter is walking past towards a man in a dark white and white shirt (only just visible). The room has wooden panelling and a beige concertina window, possibly concealing the kitchen behind. The wording under the picture reads "Lance and Darren experiencing silver service at a C.O.H.A.T restaurant". This could have been part of a dining experience between students who came to Burwood school and a local TAFE college.Digital image of two boys at a restaurant with a waiterrvib burwood school, education

1950 decade HAY FORK - A local invention. Bill and Arthur Gillespie and Bon Barrie In the early 1950’s Bill Gillespie of Bulmans Lane had been experimenting in developing a machine to improve the collection of hay sheaves at harvesting and stack building time. The ripened crop was cut by a reaper and binder which bundled the storks into sheaves tied with binder twine. The reaper and binder was towed by a tractor by the mid 1940s previously teams of draught horses were used to pull the reaper and binder. A photograph taken at the Barrie farm shows three binders the first being towed with a tractor and the others with horse teams. Two workmen were needed to operate the binder when cutting a crop. The sheaves collected on the binder and released onto the ground and were scattered across the paddocks. Using a conventional two pronged pitch fork the harvest hands collected the sheaves and placed each one cut edge on the ground in an upright position and layered with about 15 sheaves into an apex shape to form was is known as a stook. The shape of the stook allowed for drying and draining of water if rain had occurred. Prior to the invention of the mechanical hayfork this was a laborious task requiring each sheaf to be pitched onto a tray truck and moved to the location of the haystack. The mechanised HAYFORK was operated by one person on tractor greatly reducing the need for gangs of labourers. At harvest time farmers had relied on itinerant teams of workers descending on the district looking for work. The three Barrie brothers on their adjoining farms combined forces to cut their crop at its optimum time while the weather was in their favour. Up to many 20 workers at times formed a team in earlier times. Agricultural university students were also keen to gain practical experience in the field. Each of the brothers had a particular skill, and Tom Barrie was the expert on stack building. The district haystacks had a distinctive shape and could be recognised by their builder. Bill Gillespie’s first operational HAY FORK consisted of a large 13 pronged fork situated forward of the truck cabin. It was attached with iron girders and mounted on the rear of the cabin to the tray of his British Bedford truck. It was constructed in metal and iron and welded in the farmers work sheds. The mechanism was raised and lowered by the driver scooping along the ground to pick up a complete stook to raise high enough to deposit all the sheaves in one stook onto the stack or truck tray. The fork section was released by a rope and operated by the driver in the cabin. This model was trialled on the Barrie farm at Ferris Lane. It proved to be very successful and the Barrie/ Gillespie brothers went on to develop a HAYFORK which attached to a tractor and was operated with a series of levers and was raised and lowered hydraulically. It was detached from the tractor when stacking was completed. In its early days farmers travelling along the Western Highway called at the Barrie farm at Ferris Lane to inspect its construction and operation of the invention. It became a widely adopted by farmers throughout the State. It was being used on Wattie Palmer’s farm on Bridge Road Melton South in 1997. Farming in Melton, hay growing and stack building. agriculture, local identities

This machine was used by the State Electricity Commission of Victoria on the Kiewa Hydro Electric Scheme by office workers who worked in the payroll office.The State Electricity Commission of Victoria used the latest technology available for office equipment on the Kiewa Hydro Electric Scheme. This machine was used in the payroll office.Black metal table with machine on top. Electric motor with belt drive to machine which is situated under the rear left side of the table. Safety metal mesh protects the leather belt and is at the rear of the table. The operator faces the machine which has a tray on the left and is divided longitudinally into two and holds new shiny metal plates on each side. There is a brown bakelite wheel on the left and two printing wheels inside a myriad of moving parts that enable the metal plates to be embossed with payroll information i.e. "Gang No. etc. / Names / Pay No. / Rate type. This has to be checked out each time / Date"ULQ 11 10"state electricity commission of victoria. kiewa hydro electric scheme. payroll office. office work. payroll machine. office equipment

This tall piece of equipment was used in the theatre room of the Tawonga District Hospital to move (by rolling it) to the bedside of the patient and then to adjust the large light over the area of operation as required by the surgeon.The Tawonga District Hospital's theatre room was well equipped with up to date technical equipment.Stainless steel metal tube attached to 4 legs of steel that spray out into a 'star' and have a roller coaster attached at their end. On the 5th end of the star a steel arm comes up and has a tray attached to its end. At the top of the cylinder is attached a cream metal opened ended cap with a wheel which has thick wire around it. Below this top and on the cylinder a cream metal arm comes out like a spanner, the end of which a large light could be fitted. This arm can be moved up and down the tube. This stand also has a control 'radiation control unit' that can be attached to it and to the power.medical equipment. operation. surgeon. tawonga district hospital. theatre room., x-ray, falls creek medical centre

This trinket box was made by Johann Landmann during his journey on the sailing ship Wilhelmsburg and was donated to Flagstaff Hill by the wife of Landmann's great-grandson. Landmann (or Landman, also known as August Landmann) was born in 1826 in Ganhor, Silesia, Prussia. At the age of 20, he travelled through Europe, working from town to town as a cabinet maker. At 26 years old he returned to Germany, married Anna Rosina in Wahlstatt, Prussia, and on the same day sailed for Australia on the Wilhelmsburg in 1853, the year the ship was registered. The Wilhelmsburg was a three-masted, square-rigged sailing ship built at Reiherstieg, Hamburg, and registered in Hamburg on 27th April 1853. On her maiden voyage in 1853, the ship sailed from Hamburg, Germany, to Australia with 510 passengers on board, including emigrants under the Bounty Scheme. Johan Landmann was one of the passengers. The Wilhelmsburg arrived in Hobson’s Bay, Melbourne after sailing for 100 days. Johann spent a week in Melbourne then travelled to Warrnambool aboard the Merry Kitty, arriving fourteen days later. Johann had landed in Melbourne with only 16 shillings in his pocket and by the time he arrived in Warrnambool, he only had one shilling and sixpence left. He also had very limited ability to speak English. He settled in the Allansford area, near Warrnambool, together with other families from Germany and went on to play a significant role in the history of Warrnambool. Johann worked as a cabinet maker in Warrnambool, making the first coffin in the Warrnambool cemetery. He also worked as a general merchant. He built many of the earliest shops in Warrnambool, and the first paddle boat used on the local Hopkins River. He made models of Warrnambool’s Ozone Hotel and Presbyterian Church; the model of the Hotel is now in the Warrnambool Art Gallery, and the model of the Presbyterian Church has been in the care of the Warrnambool & District Historical Society since around 2017. One of Landmann's residences was a two-storey building in Henna Street Warrnambool where he, lived upstairs and operated his business downstairs. After he retired Landmann built a ‘handsome stone residence’ at 30 Mickle Street, Warrnambool, where he lived until his death in June 1920; he was aged ninety-five. “Landmann Street” in Warrnambool has been named after Johann and appears on a map in 1872. He has also been honoured on Warrnambool’s Pioneer Memorial Board which is displayed at the Warrnambool and District Historical Society. Landmann's son Adolph Fritz Landmann (Fritz Landmann) born in 1861, was a Councillor from 1905 to 1915, and Mayor of Warrnambool from 1912 to 1915. The Wilhelmsburg sailed from Hamburg in 1863 heading for Queensland, Australia, but in December the vessel was wrecked off the coast of Holland during storms, with the loss of 247 lives.The trinket box is significant as an early Warrnambool historical artefact with a connection to the maiden voyage of the ship Wilhelmsburg a vessel that holds the record for the number of passengers carried in one journey on a small vessel. Johann Landmann is regarded as a significant and historical figure in the development of Warrnambool as one of the earliest pioneers, not only as a businessman but the civic duties he undertook. First as a councilman and later the mayor of Warrnambool. Trinket box, wooden, with inlaid timber patterns and images. The design includes a mirror with a hidden compartment inside the hinged lid, a removable inner tray divided into compartments, and a fitted brass lock. The trim around the base is angled to widen the base. Images on the lid and three sides represent sailing vessels and a building. The lid and corners have a rope-edge design. Panels of the top and three sides have an intricate inlaid pattern featuring various wood grains. Images are framed by lines etched into the wood. The inside corners of the frames have inlaid quarter-circles of contrasting woods, resembling photograph corners.shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwrecked artefact, warrnambool, trinket box, inlaid woodwork box, wilhelmsburg, landmann, johann landmann, augustus landmann, landman, fritz landmann (warrnambool mayor), presbyterian church warrnambool, 30 mickle st warrnambool, ozone hotel warrnambool, johann carl augustus landmann, jewellery box

.1) This one was used in the Writing room which later became a Meeting room then finally the RSL Building & History room. it was attached to the LH side of the Fire Place and ran an old Electric Heater on the Hearth. It was used up to about 2005. .2) This one was in the Old Kitchen built on the side of the Soldiers Memorial Institute in the mid 1960's This one ran the Electric stoves used by the Womens Auxiliary of the Bendigo RSL and to make the Rum & Coffee for the ANZAC Day Dawn service. The kitchen was removed as part of the Renovations in 2016 - 18..1) Heater meter, metal construction black coating, top face has a glass section with a "usage meter" saying "coins paid, unused", metal plate under with details re numbers, maker, coins per hour, on right side slot for "Shillings only" with knob, removeable lockable tray at bottom for coin storage and removing. .2)Same style as .1) but a different glass face style metering, it has 11 circular dials with one hand, these show "Coins paid, coins unused", this one shows the round meter going around when in use. The only differance between to two shapes is at the top re fixing to a wall..1) On plate, "Remote Control Switch - for alternating switch No 26 204 020 - Type Wik 36.1 - Adjustable 1-6 coins per hour, Adjusted for 1 coin per hour" On stickers, "insert 10 cents - Turn knob to right". .2) On glass section, "230/240 revs per KWH - 1200 - Serial No 8338380 - 5 - 50". On label stuck on, "10 c equals 1/2 hour"brsl, smirsl, shilling