This chart shows a possible site for the fabled wreck called the 'Mahogany Ship'. Flagstaff Hill’s collection includes other objects that some say could be relics from this Ancient Wreck, (also called the Gold Ship, or the Ancient Vessel). The chart shows the coordinates for the Summits of Griffith Island and of Middle Island. It also has the depths of the sea at various intervals and shows the shore and sand dunes, lighthouses and other reference points. The mystery of the Mahogany Ship began in 1836 when two shipwrecked sealers discovered the remains of an “ancient vessel” in the sand dunes about four miles west of Warrnambool. Since the last recorded sightings in the 1880’s the true origin of the Mahogany Ship has remained one of Australia’s most famous historical mysteries or fables. One of the more recent theories is that the vessel was one of the Portuguese ships exploring the Australian coast in 1522. For over one hundred years searchers have attempted to locate and identify the wreck. The search continues for the tangible evidence which will once and for all establish the Mahogany Ship’s place in Australia’s History.The chart represents the worldwide interest in locating the wreck of the Mahogany Ship. Locating the actual wreck or proving the existence of a Portuguese ship's wreck could change the history of the discovery of Australia. A Mahogany Ship committee was formed to gather and research information about the discovery of the wrecked ship. A large amount of money was offered as a prize for finding the wreck or parts of it. People have written books, painted images, made videos and told tales of the ship but it continues to remain a mystery or even a fable. The chart is significant for its possible link to one of Victoria’s and Australia’s maritime mysteries, the Mahogany Ship (also known as the Ancient Wreck). It is one of very few known relics that could give evidence of the existence and history of the vessel. It is listed on the Victorian Heritage Register S438 as it is one of Victoria’s oldest recorded shipwrecks. The identity of the vessel has the potential to change Australia’s history.A chart in a wooden frame, behind glass. The chart shows the approximate position of the mystery Ancient Wreck, later called the "Mahogany Ship". The chart is a copy and is based on the Admiralty Chart by Lieut. Stanley, dated 1872. Lower left: "THE MAHOGANY SHIP" "LOCALITY PLAN, ENLARGED FROM LIEUT. STANLEY'S ADMIRALTY CHART 1872" "APPROXIMATE POSITION OF WRECK MARKED [symbol of a Portuguese cross]" Other labels on chart: "BELFAST" "PORT FIARY" "GRIFFITHS I" "RIVER MOYNE" "RIVER MERRI" "ARMSTRONG BAY" " GORMANS LANE" "TOWER HILL" "KOROIT" "HELEN ROCK" "WARRNAMBOOL" "LADY BAY" "MIDDLE I" "LIGHT HO." Lower right: "G 410 B" Label on the back; "This chart presented to the Mahogany Ship Committee and Flagstaff Hill by Avis Quarrell, April 2007"warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, mahogany ship, ancient vessel, ancient wreck, portuguese ship, coastal reserve, fabled wreck, gold ship, griffiths island, belfast (now port fairy), koroit, location plan, leuit. stanley, admiralty chart 1872, tower hill, merri river, moyne river, middle island, helen rock, armstrong bay, griffiths land

This lifebuoy is part of the lifesaving equipment that would be carried on vessels in the late 19th and early 20th century. The strips of cork wood have been joined together to make the ring shape. A lifebuoy, or life-preserver, is used as a buoyancy device to keep a person afloat in the. It is usually connected by a rope to a person in a safe area such a nearby vessel or on shore. The lifebuoy is thrown to a person in distress in the water, allowing the rescuer to pull the person to safety. The lifebuoy is a made from a buoyant material such as cork or rubber and is usually covered with canvas for protection and to make it easy to grip. The first use of life saving devices in recent centuries was by the Nordic people, who used light weight wood or cork blocks to keep afloat. From the early 20th century Kapok fibre was used as a filling for buoys. Light weight balsa wood was used as a filler after WW1. In 1928 Peter Markus invented and patented the first inflatable life-preserver. By WW2 foam was combined with Kapok. Laws were passed over time that has required aeroplanes and water going-vessels to carry life-preservers on board. The lifebuoy is an example of equipment carried on vessels in the late 19th and early 20th century to help preserve life. There were many lives lost in Australia’s colonial period, particularly along the coast of South West Victoria.Lifebuoy; round, cork filling of lifebuoy. The nails joining the layers are visible. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, life rings, lifebuoy, safety ring, life-saving buoy, ring buoy, life preserver, personal floating device, floatation device, safety equipment

This lifebuoy is part of the lifesaving equipment that would be carried on vessels in the late 19th and early 20th century. The strips of cork wood have been joined together to make the ring shape. A lifebuoy, or life-preserver, is used as a buoyancy device to keep a person afloat in the. It is usually connected by a rope to a person in a safe area such a nearby vessel or on shore. The lifebuoy is thrown to a person in distress in the water, allowing the rescuer to pull the person to safety. The lifebuoy is a made from a buoyant material such as cork or rubber and is usually covered with canvas for protection and to make it easy to grip. The first use of life saving devices in recent centuries was by the Nordic people, who used light weight wood or cork blocks to keep afloat. From the early 20th century Kapok fibre was used as a filling for buoys. Light weight balsa wood was used as a filler after WW1. In 1928 Peter Markus invented and patented the first inflatable life-preserver. By WW2 foam was combined with Kapok. Laws were passed over time that has required aeroplanes and water going-vessels to carry life-preservers on board. The lifebuoy is an example of equipment carried on vessels in the late 19th and early 20th century to help preserve life. There were many lives lost in Australia’s colonial period, particularly along the coast of South West Victoria.Lifebuoy, round cork filling inside white canvas cover with four reinforced bands. Four ropes are attached.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, life rings, lifebuoy, safety ring, life-saving buoy, ring buoy, life preserver, personal floating device, floatation device, safety equipment

PS Pevensey was the last vessel to be built on the Moama slipway in 1910. it was originally built as the barge Mascotte a year earlier. It is powered by a 20hp Marshall and Sons steam engine and was first used on the Murrumbidgee River where it collected wool bales and brought them back to Echuca where they were loaded onto trains and taken to Melbourne for shipping overseas. The PS Pevensey was named after the Pevensey Station on the Murrumbidgee River. In the 1950's it travelled to South Australia where it survived being burnt and sunk but continued to keep working in the agricultural industry. It was sold to the Port of Echuca in 1973 where it was restored over 3 years and is still the largest vessel operating from the Echuca Wharf. In 1982, it was temporarily renamed The Philadelphia, and starred in the TV mini series " All The River's Run" based on the books by Nancy Cato. In 1985 Prince Charles and Lady Diana visited Echuca and cruised on the PS Pevensey, although it was labelled PS Philadelphia for the occasion. It is the largest vessel operating from the Echuca wharf as it can carry 90 passengers or 120 tons of cargo. PS Pevensey is a Murray River paddle steamer from 1910 and was built at Moama in NSW opposite the Port of Echuca. It was one of the largest towing and cargo paddle steamers on the river and was known as "the great Clydesdale" of the river. PS Pevensey remained operating on the river until 1958 after a number of years lying dormant it was purchased in 1973 and restored at Echuca. It began operating again in 1976 and it is still taking trips. it is one of a small number that still operates in its cargo carrying layout and with its original reconditioned engine. Coming back to Echuca PS Pevensey brought Kevin Hutchinson OAM to work at the Port of Echuca for the rest of his life.A side wheeled paddle steamer. Originally built as a barge the barge Mascot in 1909. Rebuilt as the PS Pevensey a year later in 1910.Pevensey labelled on the wheelhouse..wool bales, murrumbidgee river, all the rivers run, pevensey station, port of echuca wharf, prince charles and lady diana, the barge mascotte, kevin hutchinson.

A ship's rudder indicator is used for measuring the angle of slope or pitch of the vessel. The information can be used to adjust the steering of the ship to give safe navigation. The rudder indicator transmitter once contained in this box was battery operated, according to the label inside this box. Box, wooden, used to store a battery operated Siemen's ship's rudder indicator. Made in the United Kingdom. Descriptive leaflet glued inside hinged lid. Lid secured by hooked catch. Brass latch. Metal mounting plate. Hole drilled in back. Dovetail joints. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, siemen's brothers london, siemen's rudder indicator box, nautical instrument for measuring pitch or slope, scientific instrument box, navigational instrument box

William Ellis was related to John Gillies Waite Ellis who was named after the captain of the vessel that brought the family to Australia. He went to New Zealand and established Homes there before returning to Victoria. He went to school at Redan and was an Old Scholar there.An image of William Ellis as reproduced in a Ballarat newspaperwilliam ellis, john elis, john gillies waite ellis, redan stat school, new zealand, redan, sebastopol

The binnacle was originally from a lifeboat of the tug 'Melbourne' previously 'Howard Smith'. When the vessel sank at Gellibrand [Williamstown], the binnacle was under water for about one month. The lifeboat was later cut loose from the wreck by a salvage crew [as told by the donor].A good example of a small binnacle and compass as used on a lifeboat from the 1950s.Binnacle, brass with wick light mounted on timberbinnacle, compass, tug boat, 'melbourne', 'howard smith'

Compass, divider, and caliper are basically instruments that have two legs pivoted to each other at the top and are concerned with small-distance measurement or transfer. The compass and divider have straight legs; the caliper has curved legs. Dividers and Calipers were known to both the Greeks and Romans, though the caliper was uncommon. A divider with a circular sector, or wing, connecting the two legs was sketched in 1245, its modern counterpart is the wing divider with a thumbscrew clamp and screw for fine adjustment. Or the marine dividers used to measure the distance a vessel has travelled by transferring the vessels distance from a map with the divider and transferring that measurement to a marine ruler to mathematical calculate the distance.Item is believed to be a replica/ copy of a 19th century map calipers used in marine navigation to determine distance travelled. Item was probably purchased between 1972-1975 to add to the marine displays at Flagstaff Hill.Stainless steel dividers used in navigation charts. Top half is alloy plated. "W & HC" and "Made in England".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, stainless steel dividers, steel dividers, dividers

The Melbourne Harbour Trust Commission purchased the steam dredge SIR WILLIAM MATHEWS on 10 October 1941 from the Western Australian Government. Although the dredge was described as a suction dredge it was in fact a bucket dredge. After an overhaul, the vessel was renamed the GEORGE KERMODE and commenced operation in Victorian waters on 22 June 1942. The vessel was hired out to the Port of Burnie in 1945-46 but continued in the ownership of the Trust until 1 April 1976 when it was scuttled by the Department of Conservation, Forests and Lands as part of their artificial reef program. This program resulted in a number of reefs being established in Port Phillip Bay, including one off Carrum containing the wooden steamer URALBA.Timber and brass ship's wheel from center ladder hopper dredge George Kermode (formerly Sir William Mathews). Built Paisley Scotland 1914.noneships wheel, scuttled vessels, artificial reefs, george kermode

These two framed model ship plans are from more than 650 produced for the LOCH ARD Centenary (1878-1978) Commemoration Committee. These plans were originally researched, designed and distributed in 1977 to assist entrants in the Committee’s Ship Model Competition. The competition was arranged as a means of creating public interest and awareness for the 100th anniversary of the tragic LOCH ARD shipwreck on Victoria’s south west coast in 1878. The main subject specified for modelling was “The Loch Ard ― Iron Wool Clipper 1873”. “The plans were drawn by Mr P Webb to the order of the Committee through Mr P Williams, organizer of the competition. The details were based on all available information which resulted in considerable historical research…and received favourable comment from model makers because of their attention to detail…In excess of 650 sets of plans were sold before entries closed…Many plans were probably purchased by collectors and interested persons for historical reference. An illustrated historical story sheet…was prepared and enclosed with the plans…” (‘Loch Ard Shipwreck Centenary 1878-1978 Report’, November 1978). An example of the attention to historical detail delivered on the plans is the inclusion of the following useful information about the original vessel: “Tonnage….1,693 G.R.T., 1,624 N.R.T. Builders….Charles Connell & Co., Ltd., Scotstoun, 1873. Owners….General Shipping Co., Glasgow, (Aitken Lilburn & Co., Ltd.)”. The quality of research and drafting makes these framed copies of considerable interpretive value to related items from the LOCH ARD shipwreck on display at Flagstaff Hill. They were originally mass produced but are now out of print. Flagstaff Hill retains other (unframed) copies in storage. The plans, in conjunction with the scale Ship Model of the LOCH ARD also on display, are of interpretive significance to Flagstaff Hill Maritime Village. The plans provide historical and technological context to artefacts from the shipwreck, increasing understanding and appreciation of those objects. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Two framed model ship plans of the LOCH ARD. These are detailed and researched plans from the original vessel, drawn to scale and printed on good quality paper, and framed behind glass to be hung on display. One slightly smaller plan “Lines, Decks and Details” portrays the hull lines as a body plan (straight on at the bow), a sheer plan (full side view), and a half breadth plan (a top-down view of deck to keel), as well as two top-down views of the upper decks and main deck with fittings and details of specific fixtures. One slightly larger “Sail and Rigging Plan” presents a side on, above deck view of masts and shrouds and a front on, above deck view showing “Elevation of Mainmast Looking Aft”. Each plan bears the draftsman’s initials and date of completion (“P.A.W. 10/77”). The larger plan also includes a boxed label attributing the project to the “LOCH ARD CENTENARY Commemoration Committee Ship Model Competition.”Smaller plan: heading “LOCH ARD: LINES, DECKS and DETAILS”; initials “P.A.W. 10/77”. Larger plan: heading “LOCH ARD: SAIL and RIGGING PLAN”; initials “P.A.W. 10/77”; label “LOCH ARD CENTENARY Commemorative Committee Ship Model Competition”. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, ship model plans, loch ard model plans, sailing ship, loch ard centenary

Harry Holmes and his battalion friends photographed aspects of their time on the Suez Canal, Egypt. Egypt was a major base for the AIF from December 1914. A number of campaigns were fought in this theatre. There were two campaigns involving the AIF. Note that not all the fighting was actually geographically in Egypt. (http://www.aif.adfa.edu.au:8888/about3.html) This photograph is significant because it was taken by a soldier (rather than an official war artist) and shows one of the day to day activities experienced by Australian Soldiers in Egypt during World War One.1) Four Australian soldiers during World War One in Egypt .2) Soldiers watch while two men 'fight' on a greasy pole during World War One .3) Australian soldiers stand at the grave of a German Officer at the Suez Canal, Egypt.2) Verso - "greasy Pole Fight" .3) verso: - Snap taken at grave of German officer killed in the first tussel (sic) with Turk at the Canalchatham family archive, chatham, holmes, world war, world war 1, world war i, world war one, egypt, cam williamson, greasy pole, ship, vessel, burial

The model depicts one of many sailing vessels to travel across the world for trade and migration in the 18th to 20th centuries. The craft of model making is also represented by this model. There are many craftsmen with a fascination for the sea and objects connected to it.Ship model, the sailing ship "General Gordon", in a glass and timber display case. The model is of a four masted Barque with the royal sails over double top and top gallant sails. Inscriptions are on the model. Marked "General Gordon" on side of ship and on red pennant. Flag with crab on one side and shell on other. Union Jack. Red ensign.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, general gordon, ship model, barque, sailing ship, vessel

The kerosene lamp was one of the most common oil lamps used and was manufactured until the 1980s. This particular lamp has the design of the early kerosene lamps. Its gimbal bracket and counterweight heavy base allow it to swing with a vessel's movement and still stay horizontal. The lamp is significant for its design which is an example of a 19th and early 20th-century kerosene lamp with a wall-mounted gimbal bracket and counterweight base. These features were important to vessels at sea, allowing the lamp to swing with the vessel's movement and stay vertical on rough seas.Kerosene lamp; round electroplated metal top and base, both shaped inward to join together. The base is a solid counterweight to work with the gimbal wall attachment bracket. There is no glass cover.shipwreck coast, flagstaff hill maritime museum, flagstaff hill maritime village, warrnambool, flagstaff hill, kerosene lamp, lighting, marine lamp, kerosene lantern, lamp, lantern, marine equipment, wall gimbal, wall mounted lamp, ship lamp

One inch Nordenfelt machine guns were used on board vessels of the Victorian Navy to combat the torpedo boats. One inch, as opposed to the .45 inch, Nordenfelt guns used by the Land Forces could penetrate the boilers of torpedo boats and thereby stop them.none

The mining company in Seddonville New Zealand purchased a small steamer, SS Lawrence, to transport coal, but in 1891 the vessel was wrecked at the mouth of the Mōkihinui river. The remains of the ship can sometimes be seen today at low tide on the beach on the south side of the Mōkihinui River mouth.Black & white photographship, boat, sea, river, ss lawrence, steamer, coal, new zealand, mokihinui river, shipwreck

This early 20th-century chest of drawers is unique. It was made from recycled timber kerosene boxes and metal tins. The case was made in South Australia between 1905 and 1927 by the British Imperial Oil Company Ltd, which was the first business to import bulk petroleum products into Australia. Before this, ships carried crates of kerosene as cargo. Items salvaged from the 1880 wreck of the vessel Eric the Red included kerosene boxes. Kerosene replaced plant and animal-based fuel, such as whale oil, for lighting in homes and for the lamps in lighthouses and on marine vessels. It was also used for cooking and heating and as engine fuel. The last kerosene-fueled lighthouse lamp was transferred to solar power in 1985. The chest of drawers is one-of-a-kind. The original uses for the components of the chest of drawers, the wooden box and metal tins were for containing and transporting kerosene. Kerosene was used from the late 19th century for fuel in lamps, heating, and cooling. Previously whale oil was used for the lamps in lighthouses. The company providing the kerosene was the first to import it into Australia in bulk quantities. The set of drawers is one of the many ways that inventive Australians were able to repurpose materials.Chest of drawers; wooden frame and rails, metal drawers with vertical metal handles. The frame has been constructed from the wooden panels of a vintage oil and kerosene box. The three drawers have been created from empty kerosene cans that were cut in half from top to bottom, some with the round opening closed over. Inscriptions from the original box and cams are stencilled on the top and base of the frame and impressed or painted on the metal cans. The frame has provision for a further drawer. The wooden case and metal tins were made in Australia.Top and base of frame; "THE BRITISH IMPERIAL OIL CO. LTD." "OIL ENGINE KEROSENE" "CASE ANDTINS AUSTRALIAN MADE" On tin; "POWIRIN" "BIOCO LTD" Logo [cross} with inscription on horizontal bar "CROSS" Impressed in timber drawer dividers (indecipherable text) Side of drawer, painted in orange on black; "TY -, REG U S - TIDE - "flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, antique, domestic equipment, chest of drawers, tool box, furniture, storage, recycled tin, recycled box, kerosene, fossil fuel, lighthouse lamp fuel, british imperial oil company ltd.

MV ETTRICK was a British Passenger Motor Vessel of 11,279 tons built in 1938 by Barclay Curle & Company, Glasgow, for the Peninsular & Oriental Steam Navigation Company. The Vessel was on charter to the Admiralty as a Troopship. On the 15th November 1942 she was torpedoed by German submarine U-155 at 0315, 150 miles W of Gibraltar. She sank at 0836. She was on a voyage from Gibraltar to the Clyde in ballast, with a crew of 204, 66 naval ratings, and 41 gunners. 18 naval ratings and 5 Asian crew were lost; another Asian seaman died of his injuries. Survivors were taken to Gibraltar by the Norwegian destroyer Glaisdal and returned to the UK in P&O´s Mooltan the following day.Silver plated salt and pepper shakersSalt and pepper shakers with embossing showing Flag and M.V. ETTRICK.mv ettrick, ww2, troopship

HMAS Una was a Royal Australian Navy sloop that began its life as the German motor launch Komet. The ship, and her 57 crew, was captured by an infantry detachment of the Australian Naval and Military Expeditionary Force 9 October 1914, with no loss of life. Komet was then sailed to Sydney as a prize. During the time in which the Una was in service under Australia, the sloop was used as a Patrol and General Purpose Vessel. The sloop was used to patrol the areas of New Guinea, New Britain, New Hebrides and Malayan waters. After World War I, Una was decommissioned and taken to Port Phillip Bay, renamed Akuna and used as a pilot vessel. She was finally broken up in Melbourne in 1955.After World War I, HMAS Una was decommissioned and taken to Port Phillip Bay, renamed Akuna and used as a pilot vessel. She was finally broken up in Melbourne in 1955.A sclae drawing showing side view of the double screw passenger steam boat 'Komet' which was captuered by the RAN in WWI Doppelschrauben Passagierdampfer Aussen Haut [Double Screws, Passenger Steam Boat, Outside Hight]akuna, ppps, port phillip, hmas una, ran

In an article from the Argus, Monday 7 March 1927, page 21: "Surprise was caused on the waterfront yesterday by the appearance of the Reardon Smith line steamer Buchanness, which armed in Hobson's Bay with a list to port of more than 15deg. The vessel anchored off Gellibrand yesterday morning, and a consultation was held concerning the advisability of attempting the passage up the Yarra. The list changed to 12deg. before the tug James Paterson came alongside the Buchanness, and the steamer was piloted to a berth at No 18 South Wharf by Captain K.A. Forbes. The list was caused by the consumption of the fuel oil from bunkers below the waterline and the consequent overbalancing of the vessel by the heavy deck cargo. This wass not considered dangerous by either the master of the vessel or the pilot, both of whom stated that a ship carrying timber was liable to become unstable to some extent without showing any tendency to heel over. The Buhanness comes from North Pacific lumber ports with 4,300,000 super feet of red wood, oregon, and spruce timber, all of which will be discharged at this port to the agency of C.A. Wilms and Son. The discharge will occupy about three weeks.weller album, s.s. buchanness, timber, lumber, 1927, oregon

In an article from the Argus, Monday 7 March 1927, page 21: "Surprise was caused on the waterfront yesterday by the appearance of the Reardon Smith line steamer Buchanness, which armed in Hobson's Bay with a list to port of more than 15deg. The vessel anchored off Gellibrand yesterday morning, and a consultation was held concerning the advisability of attempting the passage up the Yarra. The list changed to 12deg. before the tug James Paterson came alongside the Buchanness, and the steamer was piloted to a berth at No 18 South Wharf by Captain K.A. Forbes. The list was caused by the consumption of the fuel oil from bunkers below the waterline and the consequent overbalancing of the vessel by the heavy deck cargo. This wass not considered dangerous by either the master of the vessel or the pilot, both of whom stated that a ship carrying timber was liable to become unstable to some extent without showing any tendency to heel over. The Buhanness comes from North Pacific lumber ports with 4,300,000 super feet of red wood, oregon, and spruce timber, all of which will be discharged at this port to the agency of C.A. Wilms and Son. The discharge will occupy about three weeks.weller album, s.s. buchanness, oregon, timber, lumber, 1927

Possibly acquired by seafarer Mr Arthur Dixon who served in WW2 merchant vessels. The origin of the lighters appears to be Austria and could have been acquired either during or post his war service. Initial research indicates an approximate date of 1950s for date of manufacture.See Donor details 1727-1737.2 Small, cylindrical, fluted, polished, stainless steel cigarette lighters, with flint action. Includes a flint gauge in the ignition unit. Runs on lighter fuel, with inbuilt wick. Accompanying bronze coloured metal case of flints. Manufacturer name embossed on body. Lid incised with cylindrical grip of 4 ridges. Lighter1: PATENT/BORA/EXTRA/MADE IN/AUSTRIA (stamped alongside body of lighter) Lighter2: PATENT/Made/in/Austria/902. At right angles at base of lighter, REL Flints: Thorens (stamped in brand name logo style on body at right angle to lid)cigarette lighters, smoking accessories, arthur dixon, bora cigarette lighter, arthur oswald dixon, sailors, seafarers, seamen, officers, smoking, lighters, bora

2 glass cruets and tray formerly in chapel at Bishop's Palace Ballarat. These vessels were used for the water and wine poured into chalice as part of the liturgy of the Mass in the Bishops' oratory in Sturt St Ballarat. The gilt decorative scrolls with IHS within a central decorative gilt medallion.The gilt decorative scrolls include IHS within the central medallion on the body of each cruet.

September 3rd is the day chosen to honour all those seafarers who sailed, and died, in commercial vessels in times of war in memory of September 3rd, 1939 when the transatlantic passenger liner, Athenia, was torpedoed and sank just hours after World War II was declared.Framed artwork printed on textileWritten in ink on verso: "Rachel / SOLD Y"merchant navy day, lest we forget, ww2, ww1

The Burse (AKA a "corporas-case") is a type of folder used to carry the corporal to and from the altar. It is made out of two square pieces of cardboard laid one on top of the other, then bound together along one edge to form a hinge. Sometimes, an extra purificator may be placed inside the pall. The other item is a Chalice Veil which is placed over the chalice, paten, and purificator when the vessels are prepared for the Eucharist and placed on the altar; it is removed before the Consecration. Both are Green with gold embroidered cross and trim (Epiphany and Ordinary Time).flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, burse, chalice veil

The Burse (AKA a "corporas-case") is a type of folder used to carry the corporal to and from the altar. It is made out of two square pieces of cardboard laid one on top of the other, then bound together along one edge to form a hinge. Sometimes, an extra purificator may be placed inside the pall. The other item is a Chalice Veil which is placed over the chalice, paten, and purificator when the vessels are prepared for the Eucharist and placed on the altar; it is removed before the Consecration. Both are White with gold trim (Christmas, Easter and some Holy Days).flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, burse, chalice veil

The Burse (AKA a "corporas-case") is a type of folder used to carry the corporal to and from the altar. It is made out of two square pieces of cardboard laid one on top of the other, then bound together along one edge to form a hinge. Sometimes, an extra purificator may be placed inside the pall. The other item is a Chalice Veil which is placed over the chalice, paten, and purificator when the vessels are prepared for the Eucharist and placed on the altar; it is removed before the Consecration. Both are Purple with white embroidered cross and trim (Lent or Advent).flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, burse, chalice veil

John Gillies Waite Ellis was named after the captain of a vessel that sailed to Australia. He was a scholar at Redan State School. He later became the Reverend John Gillies Waite Ellis, went to New Zealand and set up homes for boys there before returning to Ballarat, Australia.john gillies waite ellis, redan state school, reverend john gillies waite ellis, new zealand, ballarat, ellis, redan, sebastopol

John Gillies Waite Ellis was named after the captain of a vessel that sailed to Australia. He was a scholar at Redan State School. He later became the Reverend John Gillies Waite Ellis, went to New Zealand and set up homes for boys there before returning to Ballarat, Australia.Black and white portrait of Reverend John Gillies Waite Ellis.ellis, new zealand, redan, sebastopol