Guests arrive at the West Riding Hall, Henry Petrie Community Centre, Montmorency on the occasion of the Shire Centenary buffet dinner as part of the Shire of Eltham centenary celebrations. The wind section of a band, with male members, possibly the Eltham Concert Band or its precursor are seated. This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book, "Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital imagesepp, shire of eltham pioneers photograph collection, shire of eltham, shire of eltham centenary, henry petrie community centre, centenary celebrations, buffet dinner, band, wind section

Guests arrive at the West Riding Hall, Henry Petrie Community Centre, Montmorency on the occasion of the Shire Centenary buffet dinner as part of the Shire of Eltham centenary celebrations. The wind section of a band, with male members, possibly the Eltham Concert Band or its precursor are seated.This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book, "Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital imagesepp, shire of eltham pioneers photograph collection, shire of eltham, shire of eltham centenary, henry petrie community centre, centenary celebrations, buffet dinner

A wall phone used in the early 20th Century in Australia, this one in the Orbost district.A wall-mounted telephone with a handpiece connected by a cord to the left hand side of the main box. On the right hand side is a winder. Near the top of the box are two round silver gongs which make the ringing sound of the phone call. The box is mostly made of wood, with the front-bottom section with a metal facing which is able to be opened to reveal the mechanism behind (including the battery). The phone has a wooden writing slope attached to the front. On the front of the metal section of the box are the words L M ERICSSON & CO trade mark STOCKHOLM. L M ERICSSON & CO TRADE MARK STOCKHOLMtelephone-communication wall-phone

This metal plate machine used plates that contained names, addresses and classifications of each State Electricity Commission of Victoria employee working on the Kiewa Hydro Electric Scheme. The plates were put through the machine onto pay envelopes.See also: KVHS 1046, KVHS 1233The S.E.C.V. employed many people on the Kiewa Hydro Electric Scheme and used the latest technology of the time to pay each of them including providing each one with a pay slip. Metal table with the addressograph machine set into the middle section. The electric machine is belt driven and controlled by three 52 cm long metal pedals. The operator uses 5 stops, 2 knobs and 1 winder while sitting at the machine. There are 5 extra metal parts (or pieces) which belong to this machine. Ref. KVHS 1046 - Ink Rolls - Labelling Cartridges for Addressograph MachineMetal plate attached to front of machine which reads "Class 22000 Serial No. B-01547. Addressograph regd. Addressing machine. Patents Pending Made in England Addressograph Multigraph Limited London.addressograph machine. state electricity commission of victoria. kiewa hydro electric scheme. payroll. office work.

The Box brownie camera was invented by Frank A Brownell in 1900 and further improved from 1901. Because it was easy to use, cheap and portable it became very popular. It was used by soldiers in the first World War and other models were marketed to groups such as the Boy Scouts. It was further modified until the 1950's and have been used until recent timesThis camera has significance as a very popular model which was used by a wide cross section of people over many decades. It is one of the cameras which made photography accessible to many who would otherwise not have been able to use them.Rectangular black box camera with leather handle attached with silver studs. There are two latches at the top and a winder at the back. There are three circular cutouts on the top and two rectangular ones on the sides.There is a small metal label attached to the bottom. Use film No 116 No Brownie. Brownie stamped into leather handle. On metal label on base: Made in USA by Eastman Kodak Company . Rochester NY USAbox brownie, warrnambool, kodak cameras

The Box brownie camera was invented by Frank A Brownell in 1900 and further improved from 1901. Because it was easy to use, cheap and portable it became very popular. It was used by soldiers in the first World War and other models were marketed to groups such as the Boy Scouts.Many family photos recor It was further modified until the 1950's and have been used until recent times This camera has significance as a very popular model which was used by a wide cross section of people over many decades. It is one of the cameras which made photography accessible to many who would otherwise not have been able to use them. .1 Rectangular black box camera with leather handle attached with silver studs. There is a latch at the top and a winder at the back. There are three circular cutouts on the top and two rectangular ones on the sides.There is a logo imprinted in the base of the camera and a film is inside .2 Small 38 page manual with light card cover. Mainly printed instructions with some diagrams showing aspects of operation. for Nos. 2 A 2C and 3 Brownie cameras..1'Brownie " on the handle.The logo on the bottom reads as follows, " No 2 Brownie Use film No 120 Made in USA by Eastmann Kodak Rochester NY." .2 Published by Eastmann Kodak Rochester NY. box brownie, warrnambool,, kodak cameras, brownie instruction manual

This camera was manufactured for a period of around 20 years, firstly in the USA and later in Great Britain. It is a simple to use basic model which used 127 film.This camera has significance as a very popular and cheaply made model which made photography accessible and relatively inexpensive to many..1 This camera is a rectangular hexagon shape with metal top and bottom and bakelite body. It has two circular winders on the bottom and a flip up section on the top which reveals the viewfinder.. There is a narrow neck strap attached with metal screws. There are two circular sections on the front , one being the lens. .2 The rectangular box is solid black cardboard on the base and is fitted with a yellow .1 Brownie Reflex Made in England by Kodak Ltd London. .2 Made in Great Britain by Kodak Limited London Brownie Reflex with Flash contacts.brownie reflex camera, warrnambool history

What had been the entrance to the Principal's office since when the extensions along the north wall of the 1875 building were in place (removed 1994). The thickness of the lower wall at tis section was 70cm (2' 4"). This was the 'North' door over which years of correspondence showed the need to put a porchway over it to prevent cold winds blowing over the gallery section of infants (Grades 1 / 2).Handwritten (HG's) information and details in blue ink on reverse sidedalton street, eltham primary school, renovations, building construction, buildings, eltham state school no. 209

What had been the entrance to the Principal's office since when the extensions along the north wall of the 1875 building were in place (removed 1994). The thickness of the lower wall at tis section was 70cm (2' 4"). This was the 'North' door over which years of correspondence showed the need to put a porchway over it to prevent cold winds blowing over the gallery section of infants (Grades 1 / 2). The much maligned, by smoking, chimney after the annex was removed during te 1994-1995 renovations which included relocating the administration and staff offices.Handwritten (HG's) information and details in blue ink on reverse sidedalton street, eltham primary school, renovations, building construction, buildings, eltham state school no. 209

This is a two part brass cylindrical object. The two pieces slide apart a small distance. This mechanism when operated removes a cap from the wick. On the side is a square, long section that holds a flint & string. On the tip of this section is a circular wheel with a serrated edge. When the inner section is slid down a little, the flame is shielded from the wind by the holes in the outer section. There is a ring mounted in the bottom., Engraved on one side are the letters CFA. Engraved on side of square section is "Patent 91 105107". On other side of square section are the words "Made in Austria". Pat 105107cigarette lighter, souvenir, smoking

The Bugle was played by the British over 2000 times to warn of impending air raids in the Middle East. When a new electronic siren was installed Bill Nicholls souvenired it and carried it in his haversack until he reached home. William Bona Nicholls No VX36468 2/24 Batt 9th Div. enlisted on 12.8.40, embarked 16.11.1940 for the Middle East, promoted L/Cpl 8.5.1941, served in the Seige of Tobruk, El Alamein and Middle East Campaigns. He was taken POW at Derna and escaped after 8 hours. Embarked for Australia 1.2.1943 and disembarked Melbourne 25.2.1943. Embarked for New Guinea 1.8.1943, hospital 5.12.1943 with Degue Fever, rejoin unit 9.12.1943, served in the Lae and Finschafen campaigns. Promoted Sgt 11.2.1944, embark for Australia from Finschafen 28.2.1944 and disembark Brisbane 7.3.1944. Evacuated to hospital 16.3.1945, appears to be Anxiety State. Discharged from the Army 3.9.1945 with the rank of S/Sgt.Copper & brass army bugle with nozzle & holding chain.Main section of bugle has: a lettered crest, & Besson & Co, London, 1940musical instruments - wind, military history, bugle, tobruk

John Kennedy was born on 04 April 1862, the son of ship carpenter Robert Kennedy and his wife Florinda (Aitken), and the brother of Malcolm and Colin Kennedy. In 1860 the family migrated to Melbourne where Kennedy senior set up as a shipwright. In 1879 Malcolm and John, who trained as a naval architect, joined their father as Robert Kennedy & Sons, shipbuilders and shipsmiths. On 27 December 1883 at North Melbourne, Malcolm married Ann White with Presbyterian forms. Next year Robert Kennedy & Sons removed to Hobart where with John W. Syme and W. J. Duffy, partners until 1889, they took over the Derwent Ironworks & Engineering Co., a foundry formerly owned by the (Alexander) Clark family. The Kennedys also acquired the patent slipyard, formerly Ross's, at Battery Point. After the shipbuilding industry in Hobart began to flag John also turned to mining: he attended the Ballarat School of Mines, and reopened the Hobart smelters which had been an adjunct of the Derwent Ironworks in the 1870s. He made several voyages overseas on smelting business and as mining promoter, and was a member of the London Stock Exchange. In 1913-14 he was manager of Tongkah Compound (1910); Robert Kennedy & Sons was reputed to have contributed to the success of the Hobart-run Tongkah Harbour, Thailand, tin mines by developing a suitable dredge. The brothers also held shares in the Irrawaddy Burma Co. John was a member of the Australasian Institute of Mining Engineers and from 1932 an honorary life member of the American Institute of Mining & Metallurgical Engineers. John died in Hobart on 10 January 1937. (Ann G. Smith, 'Kennedy, John (1862–1937)', Australian Dictionary of Biography, National Centre of Biography, Australian National University, http://adb.anu.edu.au/biography/kennedy-john-7092/text11963, published first in hardcopy 1983, accessed online 24 April 2020.) A book covered in black leather with 'John Kennedy' embossed on the front in gold. The book contains notes from the time he studies at the Ballarat School of Mines. The beginning of the book has an alphabetical section where John Kennedy has created an index.Inside front cover 'John Kennedy Nena Wharf Hobart Tasmania.' john kennedy, australasian institute of mining engineers, ausimm, american institute of mining metallurgical engineers, ballarat school of mines, lecture notes, lecture notebook, antinomy, brick clay, carbon, coal, copper, chemistry, clay, chrome, electricity, fire clay, gas, gold, gold bullion, glass, gold test for, iron metallurgy, light, lead, metallurgy, mica, mineralogy, pyrites, sulphur in pyrites, sugar, slags, wolfram, preparation of pure gold, scorification, gold bullion assay, petrography, melting poinys of bodies, metric system, geology, mount morgan, queensland, rock salt, assay of tailings, classification of rocks, muffle furnace, ballarat school of mines wind furnace, assay of antinomy, recovery of silver from solutionsheat pyrometer, spectroscope, organic acids, metallurgy of iron, assat of copper, cornstock lode nevada, mount morgan queensland, scarification, elmwood, metallurgy of lead, specific gravity, copper assay, seperation of gold from other metals, test for gold, wet assay, mercury

Bugle, copper & brass, silver coloured metal mouthpiece attached by ball chain. Brass trim on flared end brass sections repaired, soldered onto main copper tubing.musical instruments - wind, metalcraft brassware - copperware, military history - army

This object is used to wind yarn ,typically wool from a skein or hank into a ball from which it can be worked into the required garment. The skein is placed around the four pegs on the ends of each arm and wound from this into a ball. The movable arm facilitate easier winding of the yarn. It is thought that this may have come from Fletcher Jones factory where it was probably used more to rewind cotton onto reels. Either use is possible.This item or those similar would have been a well used tool in many households before the time of woollen yarn being purchased in balls. As such it has social and historical significance as well as being useful as an item to create discussion.Square wooden base with bevelled edge and central post from which is screwed two wooden strips of wood. A shorter piece of wood is riveted to each end of these two pieces and these have dowel running upright from each end. The top section is movable and can be extended or contracted as required. Light brown in colour.165 on sticker on bottom.warrnambool, wool winder, skein winder, fletcher jones

Used in WW2. Basically of german origin and manufacture but 'English' handset suggests capture and use by Australian forces possibly in Middle East Desert warfare.Black Rectangular Metal Box with Lid. Total Height 215mm (with lid closed), Body Height 140mm. Lid Height 75mm.Lid attached by full length Hinge on rear and locking Clip at front.Depth 90mm. Length 275mm. Lid Outside: has overlapping lip to body when closed.Reinforcing metal attachment on left side rolls over to inside of lid and is attached by two screws. Front locking clip is spring loaded and attached to lid by 3 screws. Lid Inside: Flexible metal plate to clip on handset. 2 inscription plates on left and right ends and telephone handset described separately Body Outside:Front: 2 Jack plug points, vertically aligned 85mm from left, 25mm apart either side of mid point of height of bodyprotedted by protective pivot plate. Air vent plate attached with 2 screws adjacent to Jack plug holes (same on Back). Left side at top; metal plate for carry strap (same on right side). carry strap not with item.Right side; hole covered by protective cover plate centred 70mm from base , Wind-Up handle attached (described seoarately. Body Inside: 2/3 filled with visible metal and bakelite components in separate compartment containing unseen working parts. Left side contains morse code key in canvas bag (described separately). Contents Inside Lid. Two schematics of wiring layouts attached to left and right ends. Removable Bakelite handset clipped into postion for carrying, attached cable has 4-pronged attachment connected to main section in body. Contents Inside Body. Most working parts hidden inside metal container. White plastic button 'Pruttaste' is a test button; threaded screws on top for attachments not present.Two pieces of loose wire purpose unknown. Canvas Bag with zip, labelled DD with arrow between (Department of Defence) containing Morse Code Key; wire with large jackplug attachment connected to MC Key through the bag. Jackplug connects via front of body of object. The whole of this item is stored in left inside of body.underside of handset says PRESS KEY WHILE SPEAKING and in smaller font size TELE HD NO 2

The Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barb wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. She was one of several designs of Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period 1882-92 Russell & Co. standardised designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. The Falls of Halladale shipwreck is listed on the Victorian Heritage (No. S255). She was one of the last ships to sail the Trade Routes from Europe and the Americas. Also of significance is that the vessel was one of the first ships to have fore and aft lifting bridges as a significant safety feature still in use on modern vessels today. The subject model is an example of an International Cargo Ship used during the 19th and early 20th centuries to transport goods around the world and representing aspects of Victoria’s shipping industry. Ship mode,l Falls of Halladale, four masted ship diorama. Glass case with wood frame. Paper on back of case with inscription "Frank Davey etc" Case frame has title "Falls of Halladale" and date on base of wood frame is" 1908". It was a four-masted iron-hulled barque.On top of case frame "FALLS OF HALLADALE" and on base of case frame "1908". Paper on back of case has inscription "Frank Davey " (See note section this document for details on Frank Davey)flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, shipwreck peterborough vic, ship model, fall of halladale ship, trade winds, barque, trade vessel, wright, breakenridge & co, ricer clyde

This bundel of twenty pages of meteorological observations covers the period between March 1947 and April 1948 but there are some gaps. The bundle includes handwritten records on pre-printed forms from the Commonwealth Government and brief records on plain paper. There are calculations for monthly totals of information such as rainfall, and there are some comparisons between the years. One of the forms has handwriting in three directions, which is quite unusual. Readings were recorded daily for barometer, temperature and wind. There was also a section for comments on Exceptional Phenomena such as storms and fog. . It was one of the many duties of the Lighthouse Keeper or his Assistant to keep these records and make the mathematical calculations required by the Government. Information gathered from Lighthouse Keepers' letters tells of the large amount of time taken for this detailed work and the lack of payment made for such a responsibility. The quite detailed record for May, June and July 1947 were signed by C Carrington, Harbour Master for Warrnambool. Captain Carrington was responsible to the Harborus Board. He was responsibilite for the fortnightly training of the Warrnambool Lifeboat Crew on the practice of lifesaving and using the Rocket Rescue equipment. These Meteorological Observations are an important accurate record of the local weather since the late 1899s. They are part of Flagstaff Hill's Meteorological Observations collection of over seventy record books dating from the late 19th century. The collected information gives a picture of the weather patterns for the months and seasons, which then allows for warnings of events out of the normal or extreme, such as forecasting floods or droughts.Meteorological Observations for Warrnambool March 1947 to May 1948. A bundle of unbound sheets of paper joined at the top left corner with a metal fastener. The pages are ordered from most recent on top to the oldest on bottom. The older records are on pre-printed forms and include many handwritten details. The more recent records are handwritten on plain paper. There is a line for each day of the month and lines for calculations at the bottom of the page. The handwritten Information includes readings for Barometer, Temperature, Wind and Rain. Printed: "COMMONWEALTH OF AUSTRALIA METEROLOGICAL OBSERVATIONS / Division No. 5, Vic. "flagstaff hill, warrnambool, great ocean road, shipwreck coast, flagstaff hill maritime museum and village, maritime museum, maritime village, meteorological observations, weather records, meteorology, barometer readings, temperature records, barometer records, wind records, rain records, commonwealth of australia, division 5, weather measurement, weather forecast, weather history, carrington, harbour master

Dr. Gwen Wilson, Emeritus historian, gifted this book at ANZCA's first independent Annual Scientific Meeting held in Launceston in 1994. Dr Wilson presented this gift after her speech about the life of William Russ Pugh and his significant contribution to anaesthesia in Australia. It is unclear as to how the book came into Dr Wilson's possession. Published in London, 1845, for Longman, Brown, Green and Longmans, this book was formally owned by general practitioner Dr William Russ Pugh, being the first medical practitioner in Australia to administer ether anaesthetic on 7 June 1847, in Launceston. The author of the book, P E De Strzelecki acknowledges Pugh for his assistance during his stay in Launceston and for allowing him the use of his laboratory for the analysis of the soils and minerals that were subsequently reported in this book (Page 131). Tan coloured cloth book with an embossed circular motif on the centre of the front and back cover. The same embossed motif is repeated four times along the spine of the book. An embossed design of small, four petal flowers borders the edge of the front and back cover. The title of the book 'Strzelecki's New South Wales and Van Diemen's Land' is printed in gold on the spine. The cloth has come unstuck at various places around the spine and a small section is missing from the base of the spine. The cover is worn and has numerous dark stains possibly from mould. The book contains 19 engraved and lithographed plates. This includes a handcoloured octavo folding, geological map, bound as a frontispiece, depicting the NSW coast down to Gippsland and Tasmania, a fold out single colour geological cross section of the Newcastle Coal Basin, 14 plates illustrating shellfish and flora and three tinted lithographs. Single page maps at the back illustrate wind patterns around Australia. [front title page, two black ink stamps that have bled through to the next page] W R.PUGH [front title page, black ink, cursive writing] H Grant \ 5 May 1910 [front title page, pencil, cursive writing, written around Pugh's stamp] Purchased from \ (unrecognizable script) [front title page, previous owner's name was rubbed out and consequently tore the page making the entry unreadable] [Inner back cover, bottom LHS, blue stamp] BOUND BY \ WESTLEYS & \ CLARK \ LONDON [Inner front cover, bottom LHS, black and purple ink] P65 \ 76 \ 78 \ 98 \ 163 \ 164 \ 217strzelecki, van diemen's land, wilson, gwen, pugh, william, launceston, green and longmans

Originating from Scotland pre-1950, this wool winder is ornately decorated featuring a male figure at its peak and a cherub at its base. Wool Winders are practical objects typically with minimal decoration; however, Wool Winders with ornate design features do exist. Scrimshaw (whale ivory) was a popular choice of material in the 18th and 19th century. It is smooth, preventing yarn from getting caught when unwinding, as well as having artistic beauty. Wool winders require a heavy base, as to not topple over when in use. It is popular to decorate these bases on more elaborate winders, such as shown in this example. The bows featured to tie the wood segments together is another feature of more elaborate models of wool winders, also highlighted in this example. This winder began life in the possession of Annie Crawford. The Crawford name has a strong connection with the town of Paisley, Scotland, and its Woollen Mills. The Crawford name can be seen working at the Woollen Mills in the 1851 Scotland Census, with Robert and his brother’s James and John working as Wool dyers. Their father Alexander also worked as a Loom Weaver. The winder immigrated with Annie when she, her husband and 3 children travelled to Australia, ready to start a new life. Most of their possessions were left behind in Scotland. This winder accompanied the family on their journey; so it stands to reason that the winder was special to them. Annie Crawford passed the winder onto her eldest daughter Joan Crawford. Joan did not have any children and so she passed the winder onto the eldest female grandchild, Fiona Crawford. Fiona Crawford continued the connection of the Crawford name with textiles, with an exhibition titled "When you go looking for me, I am not there". Utilising medieval embroidery tradition of ‘Punto Assisi, the exhibition was a reflection on the lack of women recorded in history, particularly their contribution to the domestic arts. Her work investigates both the absence of women while also honouring the unknown female makers of this now highly desired art. The Wool Winder was donated to the National Wool Museum in 2021 by Dianne Crawford, the sister of Fiona Crawford. Umbrella swift style wool winder made of metal, wood, and ribbon. Decorated at its highest point with a sculpted man standing on one leg, holding what is perhaps a rolled newspaper as though he may be bidding at an auction. Or perhaps he is holding a hank of wool. The man stands upon a three-tier platform of decreasing size and design which leads to the central metal shaft. At the base, the winder is decorated with an engraved cherub. Both figures have a small hole in one of their hands, indicating that they originally held something. Unfortunately, it is not known what this is. From the central metal shaft, this winder has 2 rows of 6 arms radiating out. These arms cross in the middle to form an X. These arms are also connected horizontally with additional arms which cross. This all forms an intricate web design, tied together with ribbon. The size of the web these arms create is adjustable, to accommodate yarns of different length. Beneath the second row of arms is a locking screw which holds this row at the desired height and width. This entire top section, beginning at the central metal shaft, can be unscrewed from its base for easier storage. The base begins in a wooden circular shape growing into a smaller ornately designed raise on which the cherub sits. From the head of the cherub the central metal shaft begins.paisley, scotland, wool winder, immigration

Middle section - bellows made of paper. Leather handle and stoppers on one end and mother of pearl press buttons, which operate keys on the other end.Mezon manufactured for Accordion Lyons Melbourne Bourke Street Lyons Sole agent Bourke St.musical instruments, wind

Leather covered camera, thin rectangle with curved ends (leather missing from expanding section). Concertina lens folds out by pressing button at the side, near film winder. Inside the hinged concertina section there is a lens, view finder and shutter button Camera has a leather case with long carry strap of similar size and shape. Original instruction manual inside carry caseCamera Case: E J Berry Bunyip Gippsland hand written inside Camera: Kodak on outside / No 1 pocket Kodak Series 2 Made in USA Eastman Kodal & co Rochester NY on inside

Black leather covered camera, thin rectangle with curved ends (leather missing from one curved end). Concertina lens folds out by pressing button at the side, near film winder, and manually pulling the concertina section outwards. Inside the hinged concertina section there is a lens, view finder and shutter button Camera has a brown leather case of similar size and shape, with long carry strapCamera Case: M Gunn Numurkah Victoria hand written inside Camera: Kodak on outside / No 1a Autographic Kodak Jr. Made in USA Eastman Kodal & co Rochester NY on inside camera, expanding, concertina, kodak

Wooden instrument for winding wool with circular base, a detachable top section which spins with four concertina arms.handcrafts, wool work equipment, wool winder

The domestic sewing box would have been used in the home.A brown varnished rectangular wooden lidded Sewing Box with a lift out top section which has 16 varying sized compartments for storing sewing accessories. There is a has a hollow area underneath the tray. The lid is attached with brass hinges and it has a brass lock and small key. There are several sewing items included - cotton reels and thread, assorted darning thread for hosiery, wool and nylon threads, a box of black pins, assorted sewing needles, thimbles, small decorative sewing scissors, black rolled tape, mixed buttons, hooks and eyes, nickel plated fittings for hats, vintage stocking hooks, a stick of white chalk, two (one green and one ivory) antique cotton thread winders and a medium sized vintage safety pin.a Variety of brands of items include - 'Rite Tone', 'Della Darn' 'C No Darn', 'Clark's Filosheen' hosiery thread, 'Barbour's Linen Wax Thread', 'The Flora MacDonald Best Steel Bodkins' 'National Hat Guard' nickel plated steel and brass fittings, 'Chadwick's Wool and Nylon' reinforcing mending thread, 'The Myrene Snap Studio' size 1 rustless press studs, 'The Pagoda Brand' rolled tape 5 yds, 'Cross Fox Brand' Best quality Steel Stems (long plastic headed pins), 'Toledo' brass thimble and a black box of 'F. Tayler & Co's Solid Headed Mixed Pins'. The brass lock has 'SECURE PATENT' stamped in to it on the inside of the edge of the front of the box. there is also a small VR with a tiny rounded pattern opposite the Patent sign. sewing equipment, sewing box, sewing, embroidery scissors, functional object

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. The clock is representative of French mantel clocks in the late 19th and early 20th century. The key included may be a replacement key as these keys were commonly manufactured in England by "Popular Progress" whose trademark is on this key.This item comes from a collection used by a prominent citizen of Wodonga. It is representative of a style of crystal ware items of the early 20th century.A French designed black and red marble or slate mantel clock. The clock face is white with black handles and Roman numerals. The number of minutes is also marked in 5 minute intervals in Arabic numerals around the outer edge of the dial. It is a wind up clock with 2 winding points. The key included is manufactured by English clock key manufacturer "Popular Progress". There is a line design etched into each of the 4 corners of the front section and the front of the base.On Key " Made in England" and the letter P inside an outline Spadehorology, french clocks, mantel clocks, domestic items