Showing 1299 items
matching buckle
-
Warrnambool and District Historical Society Inc.
Uniform, Warrnambool Fire Brigade, Mid 20th century
This is a complete uniform of the Warrnambool Urban Fire Brigade in the mid 20th century. The Warrnambool Fire Brigade, located today in Mortlake Road, Warrnambool, was established in 1863. The formation was prompted by a fire at the Flying Buck Hotel in Liebig Street. The Warrnambool Fire Brigade has a long proud history of service to the people of Warrnambool and district for over 150 years. The uniform belonged to John (Jack) Sizeland, a firefighter for over 37 years. He retired in 1977. This uniform is of some significance as it shows the type of uniform worn by Warrnambool firefighters in the mid 20th century. It is also of importance because it belonged to a local firefighter, Jack Sizeland. This is a Warrnambool Fire Brigade uniform consisting of:- .1 A black cloth single-breasted jacket lined with black and white material. It has four silver metal buttons down the front and two on the top pocket lapels. The buttons have the inscription ‘Country Fire Authority Victoria’. There are two red and black cloth tabs stitched on the top of the sleeves (‘Warrnambool Urban Fire Brigade’). The belt is stitched at the back and loose at the front. .2 Black cloth trousers with a red braid stripe down each leg. .3 Black leather belt with a silver-coloured buckle. .4 Black officer-type hat with red plastic lining, a plastic peaked front with a green backing, a red and black braid around the rim with two metal buttons and a silver-coloured metal badge of the Country Fire Authority. .5 Black cloth (polyester) tie with orange lining. Trousers: ‘C.F.A., I. L. Wise’ Tie: ‘Mark Andrew Made in Australia’ Hat: ‘Emerco, Melbourne, Registered Trademark, This is Your Guarantee for Quality, Made in Australia’ warrnambool fire brigade, jack sizeland, history of warrnambool -
Kew Historical Society Inc
Uniform - Girl Guide Uniform, 6th Kew, Scout Association of Victoria, c.1987
This Guide uniform was worn by Jane Reid when she was a Guide at 6th St Hilary's between 1987 and 1989. The uniform consists of a pale blue blouse, junior navy A-line skirt and navy wool beret with the World Guide badge embroidered on it. The scarf with the Victorian State Badge at the back is a triangle and can be used as a sling or bandage in an emergency. Jane's woggle (a band holding the tie) was made by hand. Some girls made woggles from leather, cord or items from nature such as gumnuts. The leather belt with the Girl Guide buckle bears a metal badge obtained at Britannia Park, the Victorian Guide camping ground at Yarra Junction. Her white lanyard (indicating she was a Patrol Leader) and brown leather pouch are attached to the belt. Metal badges pinned to the collar of the blouse are the World Guide badge on the right and the Guide Trefoil or Promise badge on the left. The tapes on the left sleeve identify the Guide Company, District and Region. Badges on the right sleeve are interest and achievement badges.jane reid, costumes, uniforms, girl guides 6th kew -
Brighton Historical Society
Uniform, Girl Guide uniform, circa 1952-1953
This uniform was worn by Sandra "Sally" Allmand circa 1953-57 as a member of the 3rd St Andrews Girl Guides company in Brighton. Sally Allmand went on to serve on the Brighton Council from 1977 to 1983 and was mayor in 1981.1950s Girl Guides uniform consisting of a dress, belt and beret. Blue cotton dress with long sleeves and high collared neck. Various patches sewn onto sleeves and front breast. Three front pockets fastening with black plastic buttons featuring Girl Guides trefoil logo. Breast pocket has two vertical white stripes. Brown leather belt with silver metal buckle with embossed Girl Guides logo and the text "Girl Guides Association / Be Prepared". Navy blue felt beret with two sewn-on patches. Included with the dress are a Girl Guides 'test card' dated 1953 and a rectangular De Reszke cigarette tin containing a collection of Girl Guide ribbons, patches and buttons. .1 - Dress .2 - Belt .3 - Beret .4 - Test card .5 - Box of patches and ribbonsDress label: "The Guide Shop / STATE HEADQUARTERS / RUN BY GUIDES / FOR GUIDES".girl guides, sally allmand, 1950s -
National Wool Museum
Work on paper - Officials' Uniform Design Drawings, c. 1992
A set of laminated A3 sketchbook pages depicting designs for the 1992 Barcelona Olympic Women's Opening/Closing Ceremony Uniform designed by Wendy Powitt. On the 1992 Barcelona Olympic Games donor Doug Pleasance wrote- The 1992 Barcelona Olympic Games saw an evolutionary change in designer selection. A Declaration of Interest Form was communicated to over forty potential designers. The task and especially tight timelines that were involved deterred many aspirants, however, there remained eight designers with the potential we were seeking. These eight designers were paid $3,000 per submission and the winning designer, Wendy Powitt, was paid $15,000. For the first time the judging panel included two athletes, one male swimmer and one female basketballer, their influence was pivotal. The Official Uniform was used for both travel and official functions. This included a tailored blazer and trouser/skirt set (all water repellent) by Fletcher Jones in pure olive green faille fabric by Foster Valley, a cotton PE formal shirt by Pelaco, pure wool knitwear by Spangaro, a printed wool tie by TD Noone, wool nylon socks by Holeproof and footwear by Hush Puppy.8122.1 - A laminated A3 sketchbook page depicting a design for the Men's 1992 Barcelona Olympics Australian Official's Uniform. The main drawing shows the design for blue suit pants and blazer with six gold buttons, a yellow shirt and a red, green, yellow and cream striped tie. To the left of the main image are four smaller detail drawings of the belt buckle, gold bottons, blazer and shoes. 8122.2 - A laminated A3 sketchbook page depicting a design for the Women's 1992 Barcelona Olympics Australian Official's Uniform. The main drawing shows the design for a blue elbow length, square necked blazer with gold buttons on both the front of the jacket and sleeves paired with a blue pencil skirt and a red, green, yellow and cream shirt. To the right of the main drawing are four smaller detail drawings showing the pattern for a scarf, the striped shirt, the blazer and the shoes. 1992 barcelona olympics, sport, athletes, fashion, design, artwork, drawing, uniform -
Woodend RSL
Equipment - Pattern 37 Utility Pouch
Utility Pouch was a rectangular web case that was designed to carry three Bren 30 round magazines, or two Anti-tank Rifle Magazines, or Small Arms Ammunition, or a number of Grenades, or a Water Bottle. They were secured with a flap at the top, hinged at the rear, which was fastened with a brass stud fastener on a short web tab.The object is representative of utility pouch/pouch for carrying magazine/ammunition and other items of equipment from the mid to late 20th century. The original design is the 1937 pattern web equipment.Utility Pouch of rectangular web case. Of rectangular parallelepipped shape made of thick and sturdy fabric (canvas). The colour is of a pale shade of green. Front view - Rectangular shape with overlapping closing flap with a press-stud fastener to maintain closed. Left and right views - Both sides are identical. Made of a one piece of fabric forming the base as well ("U" shape) Back view - Rectangular with metal hooks on the middle part for attachment to a belt. There is a Twigg buckle on the top part of the pouch mounted on another piece of canvass ending in a triangular shape. . Bottom view - ‘the fabric forming the base is also forming the sides of the pouch. Top view - closing flap overlapping on 3 sides and forming part of the back of the pouch. Inside view - There is excess fabric from the back panel that forms an additional layer at the base of the pouch.. Handwritten on the back: 3/750133. DELVE S.J.E. On the inside of the closing flap: presence of very faded markings (unreadable) -
Bendigo Military Museum
Uniform - JACKET, TROUSERS, BATTLE DRESS, ARMY, 1. 1977 2. 1968
Uniform issued to "LOCKYER" 114493.Jacket - khaki colour wool serge fabric, Battle dress style, belted at waist with metal buckle. Dark green plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder epaulettes - rank three pips, red, cream and brown embroidery for Captain. Shoulder sleeve insignia, red fabric with dark blue embroidered lettering. "ROYAL AUSTRALIAN ARMY/ ORDNANCE CORPS". Green colour cotton twill fabric pocket and waist lining, manufacturers white cor=tton label inside pocket lining. 2. Trousers - khaki colour wool serge fabric, Battle Dress style, with fob pocket, two side pockets, one back pocket with concealed button down flap. Green colour polyester fabric lining with manufacturers white cotton label inside on back pocket, 6 button fly. Manufacturers information on labels - black ink print. 1. "A.G.C.F./ VIC 1977/^ /8405.66.025.6423/ SIZE OF CHEST/ SIZE 109/ 112PR/ YARRA FALLS 69/ BATCH, 21657/ DRY CLEAN ONLY/ CREASE UPPER/ HALF OF LAPELS ONLY/ NO./ NAME" Handwritten - blue ink pen - "LOCKYER/ 114493". 2. CONWAY BROS. PTY LTD/ ADELAIDE ^ 1968/ CLASS 8405-66-025-6199/ Y.F. PP2/ SIZE & WAIST 41PR/ MATCHING JACKET 43/44 P.R. / Dry Clean only/ Repress on original seams/ Creases set by Si-ro-set./ mending patch attached/ NAME/ ARMY NO." Handwritten black ink pen "LOCKYER/ 114493"uniform, army, battle dress, lockyer -
Bendigo Military Museum
Uniform - SERICE DRESS - OFFICERS PATTERN, 8. 1981
Medal ribbons are; 1. British War Medal 2. WW1 Victory Medal (faded) with MID ribbon., 3. Possibly Colonial Auxillary Forces decoration 1901-1938 (Green) or Colonial Auxillary Forces - Long Service 1901-1937 (Green). 4. Efficiency Decoration 1930- onwards (faded).. 1. Khaki jacket - old pattern. Four front pockets - held shut with dark copper buttons. Rising Sun Collar Badges. Lt. Colonel metal rank badges on epaulettes. the jacket has plain khaki lining. But has striped lining in the arms. It has a ribbon bar showing four medals and i M.I.D. leaf. The arms have a circular red/black colour patch, 3.3 cm diameter. 2. Khaki trousers - Two side pockets, one hip pocket. 3. Sam Browne belt - tan leather. Brass fittings includes sword holder. 4. Scabbard, tan leather with a silver top. Suits a sword. 5. Hat - peaked, khaki with dark Rising Sun Badge. 6. Belt - khaki woollen with dark copper buckle. Inside belt are light brown buttons. 7. Tie - Khaki woollen. 8. Shirt, Khaki, cotton polyester with Sgts stripes.officers uniform, accoutrements, passchendaele barracks trust -
Bendigo Military Museum
Uniform - JACKET AND TROUSERS, SERVICE DRESS, ARMY
"Herbert Rex Wills" Reg. No.342872. Service details. Refer Cat No. 5231.3.1. Jacket, Khaki colour wool/ polyester fabric, service dress style, no buttons. Collar, shoulder epaulettes, four front pockets, top with concealed buttonhole and two metal press studs on flap, lower button hole on flap. Sleeve Insignia Australian Coat of Arms embroidered on khaki patch, gold green, blue, red, black and white thread for Warrant Officer First Class. grey colour polyester fabric lining with manufactureres white cotton label inside left. 2. Belt, Khaki colour, wool/polyester fabric with holes and gold colour plastic buckle. Leather strap and button belt keeper. 3. Trousers, khaki colour wool/ polyester fabric, service dress style with fob pocket, two side pockets and one back pocket. Green colour polyester fabric waist and pocket lining with manufacturers white cotto label inside, on back pocket.1,&,3. All print illegible.uniform, army, service dress, rex willis -
Bendigo Military Museum
Uniform - MESS DRESS - FORMAL, unknown
Ribbons are: War medals 1939-45. Australian Service Medal. Belonged to Lt. Col. E.P. Seymour. One of the CO's of 38 Bn.1. Jacket - woollen, black. Lt Col Rank Badges, gold, on epaulettes. Rising Sun badges on collars. Aust Commonwealth Military Forces. Four pockets. Four gold centre buttons. Top two pockets held shut with a gold button. 2. Trousers, woollen, black with red vertical stripe on sides. Pockets - 1 coin, 2 hip, 1 rear. Fly held shut four black buttons. 3. Shirt (ex) white short sleeved. 1 button missing. E... its cotton pocket. 4. Belt, Woollen black. Brass buckle. Two mini straps on inside of belt. 5. Tie, black, cotton. 6. Ribbon bar WW2 (2 medals). 7. Hat peaked black. Formal wear. Gold braid on brim. Red band and red piping. Rising Sun Badge. Aust Comm Military Forces.On trousers, written on two pockets is name: Seymour. Hat has a ticket inside. Lt. Col. E.P. Seymour.post ww2, passchendaele barracks trust, e.p. seymour -
Bendigo Historical Society Inc.
Leisure object - WEDDING/BRIDAL HORSE-SHOE WITH KEWPIE DOLL
Wedding/bridal horse-shoe(s) and associated Kewpie doll and branch of buds/leaves. Doll - Probably celluloid with jointed (shoulder only) arms and attached satin supporting band with a single branch of buds/leaves; Horse-shoe #1 - (cardboard?) shaped horse-shoe covered with narrow ribbon; edges of shoe have imitation pearls (some missing); supportive ribbon attached to either side of shoe; Horse-shoe #2 - slightly padded and covered horseshoe with attached 'sprig' of buds and leaves; attached to one end of horse-shoe is a triangular material 'emblem' with black border, and gold 'bar' on a central white background; Buckle made of mother-of-pearl; small length of narrow ribbon; four separate pieces of 'twigs' with buds and pearls attached. This collection presented in a plastic (modern era) box with cotton wool padding - inscribed with previous catalog number of U2664)costume accessories, female, wedding -
National Wool Museum
Work on paper - Women's Village/Travel Uniform Design Drawings, c. 1992
A set of laminated A3 sketchbook pages depicting designs for the 1992 Barcelona Olympic Women's Village/Travel Uniform designed by Wendy Powitt. On the 1992 Barcelona Olympic Games donor Doug Pleasance wrote- The 1992 Barcelona Olympic Games saw an evolutionary change in designer selection. A Declaration of Interest Form was communicated to over forty potential designers. The task and especially tight timelines that were involved deterred many aspirants, however, there remained eight designers with the potential we were seeking. These eight designers were paid $3,000 per submission and the winning designer, Wendy Powitt, was paid $15,000. For the first time the judging panel included two athletes, one male swimmer and one female basketballer, their influence was pivotal. The village clothing was designed to be a highly visible garment meaning that it was easy to "Spot the Aussies" and helped to contribute to a good team spirit. Blocks of contrasting colours were a feature of the pure wool shirts. A newly developed stretch 50:50 wool/cotton fabric by Bradmill was made into shorts and jeans by Fletcher Jones.8118.1- A laminated A3 sketchbook page depicting a design for the 1992 Barcelona Olympic women's Village/Travel Wear Uniform. The main drawing shows the design for a pair of yellow shorts with a yellow and green printed, striped shirt, cinched at the waist by a brown woven belt. At the bottom of the page is a detailed drawing of the weave of the belt with an Australia shaped belt buckle. A small drawing to the right of the main image also details a small bag/pouch that attaches to the belt. 8118.2- A laminated A3 sketchbook page depicting a design for the 1992 Barcelona Olympic women's Village/Travel Wear Uniform. The main drawing shows the design for a pair of yellow shorts paired with a block colour shirt in green, red, white and yellow with a symbol in the shape of Australia on the right side of the shirt. There are small detail images of shorts and a skirt to the left of the main image and a detail drawing of a brown leather shoe to the right.1992 barcelona olympics, sport, athletes, fashion, design, artwork, drawing, uniform -
Mont De Lancey
Accessory - Watch, Cyma, 1900's
Presumed worn by Mrs C.V Schooling as noted written on the piece of paper underneath the burgundy mount inside the case.A ladies watch with a purple patterned enamel surround, a white face and black roman numerals surrounded by tiny gold dots around the edge of the face. It has a metal grooved winder on the right of the face which moves the hands but the watch doesn't keep time. The wristband is brown leather with a Reg. No on the back and has a gold coloured buckle. Is is in its original lidded case - CYMA brand, although the brand is not written on the watch itself. The case has a purple label on the top lid with an illustration of a black and gold watch with gold roman numerals behind it. CYMA - on time all the time is written below. Inside the lid is the brand and a statement about the guarantee. It sits on a burgundy velvet mount. Underneath the mount is a handwritten message from the wearer stating that the watch doesn't keep time. On the bottom of the box is writing in grey pencil with many words indecipherable. Some ink words are seen.CYMA - on time all the time is written on the top of the case lid. Inside the lid is written - CYMA - This Cyma watch is free from any defect of construction and is guaranteed to keep accurate time if not misused. On the small piece of paper under the burgundy mount is written - The watch was gaining 4 or 5 hours a day - then stopped, I do hope it can be made to go again - CVS, From Mrs C.V Schooling, Penshurst. On the back of the leather band is imprinted Reg No Victor 2watches, timepieces, watchbands, watchcases -
Woodend RSL
Patern 37 utility pouch
The item is representative of utility pouches in use in the Commonwealth forces in the mid 20th century.Utility Pouch of rectangular web case. Of rectangular parallelepipped shape made of thick and sturdy fabric (canvas). The pouch is of faded olive colour.. Front view - Rectangular shape with overlapping closing flap with a press-stud fastener to maintain closed. Left and right views - Both sides are identical. Made of a one piece of fabric forming the base as well ("U" shape) Back view - Rectangular with metal hooks on the middle part for attachment to a belt. There is a Twigg buckle on the top part of the pouch mounted on another piece of canvass ending in a triangular shape. . Bottom view - ‘the fabric forming the base is also forming the sides of the pouch. Top view - closing flap overlapping on 3 sides and forming part of the back of the pouch. Inside view - The inside of the closing flap contains 3 small inserts (for special ammunition used in the firing of certain rifle grenade). There is excess fabric from the back panel that forms an additional layer at the base of the pouch..Inside of closing flap: has a circular (round) stamp with the arrow symbol. On the inside of the press button stud (closing mechanism) is inscribed 'United xxxxx Canada" (second word is not readable) There is evidence of writing on the internal face of the back flap (just under the connection with the top cover) but it is not readable. pattern 37, webbing -
Bendigo Military Museum
Uniform - JACKET, TROUSERS, SHIRT, BATTLE DRESS, ARMY, 2. 1990 3. 1988
Uniform issued to "P. Green" No. 32045731. Jacket, Khaki colour wool serge fabric. Battle Dress style, belted at the waist with metal buckle. Dark green plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap, sleeve cuffs. Green colour cotton twill fabric lining to waistband. Manufacturers white cotton fabric label - left pocket lining. Removeable tag on inside collar. 2. Trousers, khaki colour wool serge fabric. Battle Dress style with fob pocket, two side pockets, one back pocket with concealed button down flap. Dark green plastic buttons, metal zipper fly. Manufacturers white cotton fabric label - back pocket lining. Green colour polyester lining. 3. Shirt, Khaki colour cotton/polyester long sleeves, with shoulder epaulettes and cream plastic buttons. Two front pockets with button down flaps. Manufacturers white cotton fabric label inside back below collar.Manufacturers information on labels - black ink print. 1. "ADI P/L/ VICTORIA/ 1990/ ^ / 8405-66-025- 6418/BATCH P/ SIZE 102/104L/ ARMY NO./ NAME/DRY CLEAN ONLY/ CREASE UPPER/ HALF OF LAPELS ONLY" 2. "ADI P/L/ SUB-4 VIC 1990/ ^ / 8405-66-025-6183/ BATCH S/ SIZE 84R W.84/ DRY CLEAN ONLY/ RE-PRESS ON ORIGINAL/CREASES SET BY/ SI-RO SET/ MENDING PATCH ATTACHED/ ARMY NO/ NAME" 3. " A.G.C.F./ 1988/ ^/ SIZE 40/84/ 8405-66-088-7098/ SERVICE NO./ NAME/ DO NOT BOIL OR WRING/ MACHINE WASHABLE/ DRIP DRY/ IRON LIGHTLY/ WITH WARM IRON" Handwritten - blue ink pen "3204573/Green" uniform, army, battle dress, p. green -
Bendigo Military Museum
Uniform - MESS DRESS - RAAF, 2006
For Service History Refer Cat No. 7877.6.1. Jacket - dark blue colour wool/polyester fabric. Mess Dress style winter collar and long lapels, shoulder epaulettes with Sqn Leader Rank slides - crown and wings. Three rank stripes and "AUSTRALIA" in gold metal and fabric. Gold colour plastic buttons with shank and metal pins. Raised emblem, crown and wings - RAAF. Lining dark blue polyester fabric. White cotton manufacturers label. 2. Trousers - dark blue colour wool/polyester fabric. Fob pocket, two inset side pockets and one back inset pocket. Nylon and metal zipper fly with metal hook closer. Dark blue polyester fabric lining to waistband and pockets. Manufacturers label. 3. Belt - black colour polyester/cotton webbing with metal slide buckle. 4. Cummerbund - dark blue colour elastic fabric, broad sash with hook and loop (Velcro) tape to adjust length. Manufacturers label.Manufacturers information - black ink print. 1. "TRANS TAILORING/ CANBERRA/ EST. 1994/ JOB NO./ RANK/ NAME/ 70% WOOL 30% POLY/ DRY CLEAN ONLY/ REPRESS WITH DAMP CLOTH/ DO NOT SITO SET." 2. "R76/ADA/ 66-2009/ NSN: 8405 66 146 6560/ SIZE: 100S /WAIST: 100 SEAT: 115/ SERVICE NO:/ NAME:/ LAUNDRY INSTRUCTIONS/ 70% WOOL 30% POLYESTER/ DRY CLEAN ONLY/ REPRESS WITH DAMP CLOTH/ WARM IRON/ DO NOT SIRO SET. 4. "ADI/^ /VIC 1992/ 8440.66.035.3818/ SIZE 38" Handwritten black ink pen. 1. "4573/ SQNLDR/ WRIGHT" 2. S. WRIGHT.uniform, raaf, mess dress, winter, s. wright -
Shepparton RSL Sub Branch
Water Bottle, c. 1918
This bottle may have belonged to John (Jack) Henry Teale (NX 53563). Teale was born in Riverstone, New South Wales and enlisted on 20 March 1918 at the age of 18 years and 8 months, joining the 33rd Battalion/1st Infantry Depot Battalion A Company in Liverpool; though interestingly, the stamps on his enlistment certificates predate the date of enlistment. Teale's next of kin is listed as his mother, Rebecca; on both enlistment forms, John's father, George's name is crossed out and replaced by his mother. Both parents are confirmed as being alive in a separate attestation document from 22 February, documenting parental permission for enlisted soldiers under 21 years. John Henry Teale sailed from Sydney to Liverpool via HMAS Osterley (also known as RMS or SS Osterley).This bottle was owned by John Henry Teale, a young enlistee from New South Wales. The service number inscriptions provide great research significance, allowing for research into the service history of the owner. The bottle is representative of the uniform and equipment issued to servicemen of the period, the First World War and when compared with other examples, is in comparatively good condition with the casing mostly intact. Dark blue enamelled metal eliptical-cylindrical shaped bottle with flat top and base, fastened at the top with a cork. Cork has metal handle at top with string attached (now broken where attaches to bottle). Bottle is cased in khaki woollen material, hand sewn in places and detached in others. Bottle is carried via a series of leather straps, one of which passes beneath the bottle and runs up the left and right side, ending in a loop attached to a brass metal circle and held in place with a stud/rivet; this strap carries stamped service number. Two leather straps encircle the bottom horizontally and are fastened with studs. Upper strap has service number stamped. Long leather strap passes through metal circles and each end attaches to canvas strap which sits on the shoulder. Canvas strap carries service number also. Strap is adjustable and has several punched holes through which a buckle can pass.Inscribed on canvas strap in ink: "NX53563". On middle of leather strap: "53563". On leather strap under bottle: "53563". On horizontal leather strap: "53563". john henry teale, jack teale, 1st infantry depot battalion, 33rd battalion, world war i, world war one, first world war, the great war, equipment, uniform -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Sculpture - Porcelain figurine of a doctor holding a newborn baby
This piece bears an export mark associated with Arnart Imports. Arnart was an importer and distributor, rather than a manufacturer. It is likely that this is a Pucci porcelain piece, distibuted and sold by Arnart.Porcelain figurine of a male doctor holding a newborn baby. The figure has grey hair and is wearing an unbuttoned white surgical gown. Beneath the gown the figure is wearing brown, striped trousers, a blue shirt, a red tie and black shoes. The buttons on the shirt and his belt buckle are golden coloured. The figure is wearing gold framed glasses with round frames, and is smiling. The figure is standing with his left hand in the pocket of his surgical coat, while holding a baby in his right hand by its left leg. The baby is head down and facing away from the doctor figure. The figurine is standing on a oval shaped base and there is a gold coloured, abstract, decorative embellishment at the front of the base. There is a stamp on the underside of the base of the figurine consisting of the letter 'A' below a stylised crown. The number '44/768' is printed on the base below this stamp. A retail sale tag is tied to the right arm of the doctor figure with a small piee of orange ribbon. The tag reads 'TREASURES/TODAY/HEIRLOOMS/TOMORROW'. -
Dutch Australian Heritage Centre Victoria
Suitcase (Koffer)
Suitcase brought by Dutch immigrant.The fact that the owner reinforced and mended the suitcase suggests the Dutch trait of taking care of things and making them last. The stencilled initials suggest this case was probably stored in the hold.Brown painted suitcase of reinforced oilcloth with metal handle and two metal locks. A small door lock has been added to the lid which has been reinforced on the inside by a timber slat. A plywood slat has been added to the handle side of the case. The rims of lid and case are made of metal, as are the corners. The papered interior of both case and lid shows a small floral pattern in black and beige although, as part of the reinforcement, a coat of brown paint has been added to the inside of the lid and case, but not the bottom. Of the two straps designed to hold down the contents one is still in place, but the other has been replaced by a length of elastic. The original strap is made of cotton, now a dirty white with blue edging, and does up with a small metal buckle. The interior of the case shows a lot of wear and tear with evidence of multiple repairs. A small black metal chain holds up the lid, the corresponding one on the opposite side is missing. On the inside: the timber slat carries the name A.T.A. RIJKEN in black ink and also on a black Dymo label. On the outside: the handle side displays the initials A.T.A.R. and the figure 3 in white stencil. The lid bears evidence of a label in the bottom left hand corner. The lock, added by the owner, is 3cm in diameter and branded ELZETT Made in Hungary.luggage -
Kiewa Valley Historical Society
Uniform - Mt Beauty High School
Mt Beauty High School commenced in 1953 as a Higher Elementary school as the need for a secondary college grew with the increase in population due to the Kiewa Hydro Electric Scheme. It became the Mt Beauty High School in 1964.Historical: Education in Mt Beauty commenced relatively late so there was less of a tradition. The decision to adopt a uniform is of interest to compare it with other schools and the times.Girls winter school uniform consisting of - Blazer x4 See KVHS 0019 Dark green blazer made from pure wool flannel. It has 3 pockets - 2 lower ones on each side and on the left pocket at chest height is the cloth badge 'Mt Beauty' at the top, colored scene of mountains and river in the middle and 'High School' at the bottom.... Shirt - x2 White long sleeved blouse with collar, buttons down the front and one button on each sleeve. Tie - 124 cm long with pointy ends and with a diagonal yellow stripe 0.5 cm wide on green 2.5 cm apart. Label: "Tee Dee" Made in Australia 90% wool 10% nylon Tunic - Grey pleated tunic (3 pleats on both the front and back) with a zip pocket on the right from the waist 14 cm long Also a 3.5 cm wide grey belt with grey plastic buckle and Label on centre back at neck: "Stamina / clothes/ Tailored by / Expert Craftsmen / Crusador Cloth" Size 46 uniform, mt beauty high school, school uniform -
Southern Sherbrooke Historical Society Inc.
Photograph - Two women on a motorcycle
B&W photo shows Cissy Johns and friend on a motorbike at Glen Park Farm, Selby. The photo shows two women in their 20s or 30s, sitting on a motorbike with the registration number 12169. The woman on the right who is most likely Cissie, is sitting astride the bike, holding the handlebars. She is possibly wearing a peaked cap. She has a long knitted jacket over a pale blouse, and a medium coloured skirt which is rucked up by the bike's petrol tank, showing her right leg from the knee down. She has dark stockings and what appear to be medium-heeled, laced shoes with a high shine. The woman on the left is sitting sideways on the pillion seat, with her arms loosely around the first woman's waist. She is wearing a cloche-style hat, a dark knitted v-necked cardigan or jumper, a light-coloured, mid-calf-length skirt, dark stockings and dark shoes with large buckles. Her legs are crossed at the ankles. Both women are smiling at the camera. The windscreen of a sidecar is visible. They are in a cleared paddock with a wire fence and trees in the background. n.d. -
Woodend RSL
Service Dress Jacket
Associated with the service of Lieutenant H. Dixon, circa 1943. Worn by people who served on the Home Front in this Corps during the Second World War.This item is significant because Australian Army khaki woollen service dress jacket with red embroidered circular Unit Colour Patch on the top of each sleeves consistent with markings of Australia's home guard – the Volunteer Defence Corps (VDC). Four button down closure. The jacket is fully lined with a lightweight fabric, either natural or synthetic. A self fabric belt passes around the waist and fastens with a buckle at the front. Button down epaulettes with two pips denoting lieutenant ranking. 'Rising Sun' collar badges on each lapel. Pleated breast pockets with triple pointed flaps with exposed buttons. A pair of pockets over each hip with straight flaps each fastened with one visiable button. Pockets over hips have one Four front pockets are fastened with one visible buttton. These 8 buttons are domed metal showing a raised emblem of Australia surmounted by the King's Crown: also see Tudor Crown or Imperial Crown. The back of these buttons have a loop shank, secured with cotton. Surrounding is a stamp K. C. LUKE PTY LTD. MELB. There is a small pocket on the inside of the jacket corresponding to the right breast pocket.Small, white, rectangular manufactures tag stiched with khaki coloured cotton within the small pocket on the inside of the jacket corresponding to the right breast pocket. Approximately H 24mm x W 44m The MYER STORE for MEN MELBOURNE & ADELAIDE Typed in red ink on the bottom section of the manufacturers tag. Lt. H. Dixon W. 7290. 10/12/43.heraldry, uniform, volunteer defence corps -
Woodend RSL
Headwear - Australian Light Anti-Gas (ALAG) respirator Haversack
The haversack is the brown version (as opposed to the tropical version) issued by the Australian army. Designed inspired from the British haversack with the Australian using a Lift The Dot system instead of a pull tab. This model uses the same ring strap connector as the British haversack.The object is representative of military light gas mask pouch circa mid 20th century.Of rectangular parallelepipped shape made of thick and sturdy fabric (canvas). The colour is faded to a very pale shade of green. Some patches of original colour remain under the pocket flaps showing a darker shade of green. Front view - Rectangular shape with overlapping closing flap with a fastener to maintain closed Left and right views - Both sides have a small pocket attached. Pockets are maintained closed with a press-stud There is a metal buckle on top of the small pockets to attach a lanyard (using items 2020.000018-2 & 2020.000018-3). Back view - Rectangular with metal hooks on top and bottom to enable attachment to a strap/webbing. Bottom view - ‘U’ shaped stitching apparent (for internal pocket) with a metal stud slightly off center of the base (enabling closing of the internal pocket). Top view - closing flap overlapping on 3 sides and attached to the fabric forming the back part of the pouch. Inside view - On the inside, there is a small pocket at the bottom closed with a press-stud. There is also a loop of fabric fastened with another metallic press-stud. There is also an insert against the back pannel (full heighth of the pannel).The fastener of the main cover flap has "LIFT THE DOT" inscribed on the outside. Contains the Department of Defense symbol on the inside of the cover flap. -
Lara RSL Sub Branch
Belt, Leather Belt
This belt belonged to a WW1 Australian Anzac who most probably, because of the buttons and badges, served on the Western Front. Records destroyed in 1969 bush fires at Lara means we are unable to determine who owned this in the RSL. The belts is called a 'stable belt' and the one you have acquired is an early example with a leather pocket. It became common in WW1 for both, leather belts (especially that from the 1903 bandolier equipment as worn by those in the Boer War), and stable belts to be used to hold badges collected from fellow soldiers and for that reason it was often known as a 'souvenir belt'. The evolution of the stable belt: It seems that stable belts began to become popular across the Army as a whole around the turn of the 20th century, although they probably originated with the cavalry a little earlier sometime in the 1880s/1890s. All units at that time had horses on their establishment and those soldiers told off to attend them reported for Stable Parade in Stable Dress which consisted of very high waisted and pocket less breeches, or trousers, held up by braces and collarless, woollen flannel shirts with sleeves rolled up. This was to facilitate the rigorous physical effort and flexibility of movement necessary for mucking out and grooming. Braces at that time had no elastic as rubber was expensive, they were made of cotton with no 'give' whatsoever and so soldiers commonly allowed the braces to flop down from the waist so that they could bend over freely. For trousers that fitted loosely (due to the high waist) this meant that they tended to slip down and at first soldiers cinched them in with leather belts. Later on the regimental saddlers began to make belts from the same, plain canvas or wool strapping used for the horses Surcingle and utilising the same double leather strap and buckle arrangement for security (if one strap broke the other would hold and prevent the saddle from coming unseated). One particular feature of these early stable belts was a sewn on (or in) pocket, secured by a stud or clip, within which loose change could be kept, or a pocket watch, as there were no pockets in the breeches. As you might imagine these became very popular as the pocket was useful and the extra breadth afforded by the canvas strapping made them very comfortable. Around about the turn of the 20th century it began to be popular for officers to wear neckties in regimental colours both for sport and less formal, country dress. This habit probably began with the Queens Household troops and Line Cavalry, but quickly spread throughout the Army and it appears as if this use of regimental colours spread to the canvas or wool strapping used to make stable belts. For this reason the stable belts invariably followed the same colour scheme (but not always the same pattern arrangement) of regimental neck ties. This belt is an example of what Australian troops collected when on the Western Front during WW1 and when on leave.Leather Belt with 31 Badges and Buttons from WW1 attachedSee Mediaww1, world war 1, australian army, badges, button, belt, stable belt -
Lara RSL Sub Branch
Belt, Webbing Belt
This belt belonged to a WW1 Australian Anzac who most probably, because of the buttons and badges, served on the Western Front. Records destroyed in 1969 bush fires at Lara means we are unable to determine who owned this in the RSL. The belts is called a 'stable belt' and the one you have acquired is an early example with a leather pocket. It became common in WW1 for both, leather belts (especially that from the 1903 bandolier equipment as worn by those in the Boer War), and stable belts to be used to hold badges collected from fellow soldiers and for that reason it was often known as a 'souvenir belt'. The evolution of the stable belt: It seems that stable belts began to become popular across the Army as a whole around the turn of the 20th century, although they probably originated with the cavalry a little earlier sometime in the 1880s/1890s. All units at that time had horses on their establishment and those soldiers told off to attend them reported for Stable Parade in Stable Dress which consisted of very high waisted and pocket less breeches, or trousers, held up by braces and collarless, woollen flannel shirts with sleeves rolled up. This was to facilitate the rigorous physical effort and flexibility of movement necessary for mucking out and grooming. Braces at that time had no elastic as rubber was expensive, they were made of cotton with no 'give' whatsoever and so soldiers commonly allowed the braces to flop down from the waist so that they could bend over freely. For trousers that fitted loosely (due to the high waist) this meant that they tended to slip down and at first soldiers cinched them in with leather belts. Later on the regimental saddlers began to make belts from the same, plain canvas or wool strapping used for the horses Surcingle and utilising the same double leather strap and buckle arrangement for security (if one strap broke the other would hold and prevent the saddle from coming unseated). One particular feature of these early stable belts was a sewn on (or in) pocket, secured by a stud or clip, within which loose change could be kept, or a pocket watch, as there were no pockets in the breeches. As you might imagine these became very popular as the pocket was useful and the extra breadth afforded by the canvas strapping made them very comfortable. Around about the turn of the 20th century it began to be popular for officers to wear neckties in regimental colours both for sport and less formal, country dress. This habit probably began with the Queens Household troops and Line Cavalry, but quickly spread throughout the Army and it appears as if this use of regimental colours spread to the canvas or wool strapping used to make stable belts. For this reason the stable belts invariably followed the same colour scheme (but not always the same pattern arrangement) of regimental neck ties.This belt is an example of what Australian troops collected when on the Western Front during WW1 and when on leave.Webbing Belt with Badges and Buttons WW1See Mediaarmy, australian army, western front, aif, s.w.ellis, service number 640, 2 m.g.c., buttons, badges, belt, stable belt -
Victorian Interpretive Projects Inc.
Photograph - Colour, Gravestone for F. Rawlings, Pheasant Wood Cemetery, Fromelles, 2014, 19/07/2015
The photographer, Ann Gervasoni, was in Frommelles for the reburial ceremony for 5 previously unidentified Australian soldiers. "AFTER almost 94 years, Ballarat soldier Private Frederick Rawlings, and a long-standing family mystery, can finally be laid to rest. Private Rawlings was one of 5533 Australian soldiers killed in the bloodiest conflict in Australian history, the World War I Battle of Fromelles, France. He was one of 250 men buried in a mass grave at Pheasant Wood after the battle of July 19 and 20 in 1916. In the past two years, a joint Australian and British project has aimed to positively identify the remains of those soldiers buried at the site. This week, the Federal Government announced Private Rawlings was one of 75 men who had been identified by name. Also on the list were Corporal Leslie Hart, born in Clunes, and Lance Corporal Allan Bennett, born in Ballarat, both of whom joined the army in Western Australia. All but one of the 75 soldiers have now been re-buried, with full military honours, at a specially constructed cemetery near the battle site. Private Rawlings' grand-niece, Maureen Holding, of Mannibadar, got a call to confirm the news on Tuesday night. 'It's just quite incredible after all these years and huge loss of life, they've actually identified him,' Mrs Holding said yesterday. Last year, Mrs Holding and her brother, Leo Rawlings, gave DNA samples to the Australian Army to help with the identification process. But until seeing a newspaper article more than 20 years ago, they did not know Private Rawlings or his younger brother, Corporal Sydney Rawlings, had even been in the war. On Anzac Day 1988, The Courier published a photo of Cpl Sydney Rawlings and excerpts from a letter from an army chaplain that informed Ballarat family members of Cpl Rawlings' death in Northern France in 1918. 'About two years later, my husband, Malcolm, found in a tin of rusty nails and shoe buckles belonging to my late dad, a set of war medals,' Mrs Holding said. They were inscribed with Sydney's Rawlings' name, and checks of family records and The Courier story confirmed the connection. In 1991, this newspaper published a list of soldiers who had memorial trees in Ballarat's Avenue of Honour. Next to Sydney's name was that of Frederick Rawlings.(http://www.thecourier.com.au/story/543125/remains-of-ballarat-soldier-killed-in-france-during-wwi-identified/, accessed 16/04/2014.)A number of colour digital images showing the grave of Frederick Rawlings of Ballarat in the Pheasant Wood Cemetery, Frommelles, France.world war one, fromelles, pheasant wood, frederick rawlings, allan bennett, leslie hart -
Bendigo Military Museum
Uniform - MESS DRESS, ARMY, 1987
Uniform issued to S/SGT "Brian Thompson". Years of service 1973 - 1993. 316221.1. Jacket - white colour polyester/cotton fabric, rolled collar jacket, shoulder epaulettes, top of sleeves, black colour rank badge with gold colour crown and three stripes = Staff Sergeant. Manufacturers label back below collar. 2. Trousers - black colour cotton/polyester fabric with fob pocket and two side pockets. Metal and nylon zipper fly. Red colour wool fabric twin 2 cm stripe down each side seam. Manufacturers label back below waistband. Black colour polyester fabric lining waistband and pockets. Black plastic button inside waistband. 3. Cummerbund - Red colour polyester fabric, broad waist sash with three pleats, metal hook and bracket buckle and hook and loop fastener to adjust lengthy. Black colour polyester fabric lining. Manufacturers label. 4. Bowtie - black colour polyester fabric, pre-tied bow tie with metal clasp. Manufacturers label. 5. Braces - set of white colour cotton elastic braces with metal clips to attach to trousers. Metal slide clips to adjust length and plastic strap joiner.Manufacturers information. 1. Jacket - black fabric label - TETOROM/ 65% POLYESTER/ 35% COTTON/ WIMBLEDON WEAR/ MELBOURNE". White fabric label "97R/ WARM MACHINE WASH/ D NOT BLEACH/ MACHINE TUMBLE DRY/ WARM. WARM IRON." 2. "A.G.C.F./ VICTORIA/ 1987/ ^/ ARMY NO/ NAME" 3. "POLYESTER/ DRY/ CLEAN/ (50c) ONLY" 4. POLYESTER/ DRY/CLEAN/ (50c) ONLY"uniform, army, mess dress, brian thompson -
Bendigo Military Museum
Uniform - JACKET AND TROUSERS, BATTLE DRESS, ARMY, 1953
"W.J.BERTUCH" SERVICE DETAILS - REFER CAT NO. 1664.2.1. Jacket - khaki colour, wool fabric, Battle dress style, belted at waist with metal buckle and brown plastic buttons. Collar, shoulder epaulettes, two front pockets with button down flap and sleeve cuffs. Shoulder insignia, white on red lettering "ROYAL AUSTRALIAN REGIMENT". Light khaki cotton twill fabric pocket lining. Manufacturers white fabric cotton labels. - Left pocket lining. Handwritten information. 2. Trousers - khaki colour wool fabric, Battle dress style, with two side pockets, two back pockets with concealed button down flap, one side leg pocket with concealed button down flap, button down belt loops on waist band, five button fly. Brown plastic buttons. Light khaki colour cotton twill lining to waist band and pockets. Manufacturers white cotton label, back waistband lining. Handwritten information. 3. Braces - type known as "POLICE AND FIREMEN". Set of cotton, flat elastic braces with leather button attachments for trousers. Stripes on elastic are brown, beige, blue, black and grey in colour. Metal slides for adjustment to wearers size. 1. & 2. Manufacturers information on labels. 1. Tw labels - black ink print - "Regimental NO./ NAME". Red ink print "M.T.X./ SIZE 3". Third cotton label - black ink print - all print indecipherable. Handwritten information - blue ink pen "PTE W.J. BERTUCH" 2. Black ink print "J. WILSON PTY LTD/ 1953/ SIZE 118/ MADE IN AUSTRALIA/ REGIMENTAL NO. / NAME". BLACK INK STAMP "?? - RO-SET" Handwritten information, blue ink pen "BERTUCH/ 59060". 3. Stamped on metal adjustment slides 'POLICE AND FIREMEN". Black ink stamp on leather F.B.??/ ^/ 1966/38.uniform, army, battle dress, w.j. bertuch -
Warrnambool and District Historical Society Inc.
Top Hat and Bowler Hat, Early 20th century (.1 Top Hat)
This top hat, with the initials J.H.H., belonged to John Hunter Henderson, a doctor who practised in Warrnambool from 1904 to 1939. For many years he was a member of the Warrnambool Hospital Board of Management. On his retirement in 1939 he went to live in Melbourne where he died aged 81. The John Hunter Henderson fund was established at the Warrnambool Hospital to develop the training facilities for medical and nursing staff. The bowler hat belonged to his driver (name unknown) and it is presumed that he drove a horse and buggy in the early years of the 20th century. These items are of considerable significance as they are associated with Dr Henderson, a long-serving doctor in Warrnambool and they show the status and comparative affluence of doctors in the first half of the 20th century. .1 This is a black top hat with the crown covered in beaver fur or felt of some kind. The upturned brim is slightly worn on one edge. The crown has a black corded band with a bow on one side. There is a stud with an air hole on the crown. Inside there is a brown leather lining with information on the maker on the inside base and a crown image. .2 This is a bowler hat made of black felt with lining on the edges of black cotton material. The brim is slightly turned up on the sides. The crown has a black corded band with a bow at one side. There is a circle of air holes on the side of the hat. Inside there is leather lining with some information on the maker on the inside base. .3 This is a hat box lid with a leather covering over cardboard. It is a spherical shape with some side damage where the leather is peeling. There is a leather strap handle with a metal buckle. There are remnants of travel labels pasted on to the lid. .4 This is a hat box made of leather with a metal lock on one side. It has remnants of paper travel labels on the sides. Inside the box is an insert made of maroon-coloured cardboard for storing the top hat. This insert has a leather strap to stabilize the hat. There is a name on the base of the box written on a piece of adhesive plaster. .1 J.H.H. Woodrow & Sons Hat Manufacturers to H.M. the King 13 Market St Manchester, 8 Castle St Liverpool, 45 Piccadilly London, 42 Cornhill, London, 11 Gordon St Glasgow, 40 Westmoreland St Dublin, Made in England Lincoln, Stuart & Coy Proprietary Limited Flinders St Melbourne .2 The Tropical Hat .3 Midland Railway .4 Dunedin, F.H.Moreton doctor john henderson, warrnambool, history of warrnambool, top hat -
Bendigo Military Museum
Uniform - MESS DRESS, ARMY, 1972-1973
Uniform Mess Dress issued to "Kevin Finch".Mess Dress style, black colour wool/polyester fabric jacket and trousers. Black colour polyester fabric lining. 1. Jacket - collar with two lapel badges, gold, silver and black metal with crown, star, laurel leaves and lettering "ER/ ROYAL AUSTRALIAN CORPS OF TRANSPORT". Five front pockets - two top patch pockets with button down flaps, at waist fob pocket, two lower inset pockets with flap. Top of the sleeves have three gold colour fabric rank stripes = Sergeant. Gold coloured plastic buttons with shank and metal pin with raised emblem and lettering. Crown, RACT, ER, metal belt keepers. 2. Belt - fabric as jacket, gold colour plastic buckle with two pins with black colour plastic button. Belt sits in metal belt keepers on jacket. 3. Trousers, two side pockets, fob pocket, back inset pocket. Metal and nylon zipper fly with metal hook closer. Black plastic buttons inside on waistband for braces. red colour wool fabric 4cm wide stripe down each side seam. 1. & 3. White cotton fabric manufacturers labels - inside right pocket and waistband.Manufacturers information on labels - black ink print. 1 & 3. "KEITH COURTNEY PTY LTD/ VICTORIA/ 1972-1973/ ^/ NAME/ SERVICE NO." Black ink stamp "FINCH, K".uniform, army, mess dress -
Bendigo Military Museum
Uniform - SERVICE DRESS - ARMY
Ribbon - Efficiency decoration instituted in 1935 - Dec 1986. Uniform issued to "BUTTERWORTH/ 15280".Service dress style - khaki colour wool/polyester fabric jacket with belt and trousers. 1. Jacket collar, with two lapel badges, gold and silver crown and shield with cannons and lettering. "ROYAL AUSTRALIAN ARMY ORDNANCE CORPS" shoulder epaulettes with silver and red metal crown rank insignia = MAJOR. Four front pockets. Two top patch pockets with button and two metal press studs on flap. Green and yellow service Ribbon above left pocket. Two lower inset pockets with button down flap. Two metal belt keepers insitu. Buttons - gold colour plastic with shank and metal ring. Buttons have raised emblem - crown and shield with three cannons. Brown colour cotton sateen fabric lining. No manufacturers label. 2. Belt - fabric with gold colour plastic buckle, leather belt keepers and brown plastic buttons. 3.Trousers - fabric with fob pocket, two side pockets and one inset back pocket with concealed button down flap. Button missing. Green colour polyester fabric libning, cream colour cotton waistband lining. Metal zipper fly with plastic button. White cotton label on waistband. 4. Lanyard - red colour cotton cord with knots.3. White cotton label with black ink print "REGIMENTAL NO./NAME" on waistband lining - handwritten black ink 'BUTTERWORTH/ 155280/ 7/ COY".uniform, army, service dress, butterworth