This book was hand made in Bendigo and presented to the Army Survey Regiment Sergeants Mess by WO2 Graham Squire (Later WO1 RSM RASvy). The book is to record events when the Sgts Mess Bell was rung, signaling that money was put over the bar for those present. Events such as promotions, departures, birthdays, birth of children and grandchildren were celebrated in this way and hence recorded in this book. The Bell itself was presented by WO1 Alex "Darby" Munro and that is the reason for the naming of the book "Darby's Clangers, Times and Chimes". the first entry in the book is 30 Nov 1978 and the last entry is 29 Nov1996 to celebrate the departure of the last serving members of the unit.Large handmade book with many unused pages, book is housed in a vinyl covered cardboard box.Page 1 Top - " Please leave first entry space vacant for WO2 G Squire (Fishing Warden), Thank you, Max Neil WO2 for PMC" Page 1 Bottom - "The one that got away!" Last entry "Three cheers for Litho!" signed by LTCOL Duncan Burns Commanding Officer Army Survey Regiment 29 Nov 1996.royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

This section of aluminium sheet with Swastika is from a German ME 109 fighter that was shot down by RAAF pilot Brian Eaton over Libya in Nov 1942. This section of the plane was bought back to Australia by Alex ARCHER No 40637 who was a despatch rider with No 3 Sqd RAAF. Refer Cat No 2597 for Alex Archers service details. Brian Eaton. Brian Alexander EATON, CB, CBE, DSO. & Bar, DFC. CO of No 3 SQD RAAF April 1943 to Feb 1944, EATON joined the RAAF in 1936 and retired in 1973 with the rank of Air Vice Marshall. At one point he was shot down 3 times.Swastika symbol painted on aluminium aircraft skin. Symbol is black with cream edging on a grey-green background.On back "Mantuba/Nov 1942/ N.A"military history, army, souvenirs, germany

Light Rail Bender Most rails are produced straight. While they to easily bend and appear flexible, they are required to bend for some curves, at rail joins on curves and at point (turn-out) junctions. For a safe transition around curves and in the finer areas of the point, this use to be done with a manual rail bender. Sometimes referred to as a Buddah, the rail bender attaches its two claws to the rail. In the middle of the two claws is a screw that is slowly tightened using a crow-bar to bend the rail. Tightening the screw too fast or too tightly may not give the structure of the rail time to redistribute and the rail may break if not done properly. Historic - Railways Permanent Way and Works - track equipment - Light Rail Bender Light Rail Bender made out of cast wrought ironpuffing billy, light rail bender

Railway tracks are produced straight. They may appear to be easy to bend and may appear flexible, but are required to be bent for curves, at rail joins on curves and at point (turn-out) junctions. For a safe transition around curves and in the finer areas of the point, this was required to be done with a manual rail bender. Sometimes referred to as a Jim Crow, the rail bender attaches its two claws to the rail. In the middle of the two claws is a screw that is slowly tightened using a crow-bar to bend the rail. Tightening the screw too fast or too tightly may not give the structure of the rail time to redistribute and the rail may break if not done properly.Victorian Railways Permanent Way and Works track equipment Light Rail Bender narrow GaugeCast iron semi-circular tool, with hooked ends and central screw shaft.puffing billy, rail bender, jim crow

Scrapbook filled with annotated photographs and newspaper clippings, labelled 'Shakespeare Grove History Book Oct 1986-1987'. Topics include a dance evening at Shakespeare Grove; the Bialik Fete; annual Parents' Association Revue; an audience with Israeli President Chaim Herzog; the first combined Bar and Batmitzvah ceremony; new principal; Book Week; Speech Night play; Pesach play; Jewish education; visit of an Aboriginal cultural group; advertisement; fundraising; school librarian; family maths morning; and the story of IVF triplets starting school at Bialik in 1989. Please contact [email protected] to request access to this record.1980s, jeffrey mahemoff, michael pincus, year 7, barmitzvah, batmitzvah, ben ami shemer, visual and performing arts, event, judaism, kathleen o'donnell, meg rynderman

A coping saw is a type of hand saw used to cut intricate external shapes and interior cutouts in woodworking or carpentry. It is widely used to cut mouldings to create coped rather than miter joints. It is occasionally used to create fretwork though it is not able to match a fretsaw in intricacy of cut, particularly in thin materials. Coping saw blades are always thicker and much coarser cutting than typical fretsaw blades. A coping saw consists of a thin, hardened steel blade, stretched between the ends of a square, c-shaped, springy-iron frame to which a handle is attached. The blade is easily removed from the frame so that the blade can be passed through a drilled hole in the middle of a piece of wood. The frame is then re-attached to the blade and the cut starts from the middle of the piece. Long cuts perpendicular to the edge of the material are possible but the shallow depth of the frame rather limits how far from the edge one may cut. The much deeper frame of the fretsaw is more useful for cutting well away from the edge but conversely cannot manage the thicker materials commonly cut by the coping saws. The coping saw blade is installed with the teeth pointing towards the handle. Unlike a hacksaw, which has the teeth pointed away from the handle, the coping saw cuts on the pull stroke. The coping saw blade is removable by partially unscrewing the handle. The blade is prevented from rotating by means of the short, steady bar provided where the blade is attached. Loosening the handle also allows the blade to be rotated relative to the frame as desired. Carefully aligning the finger steady bars at the top and bottom of the blade ensures that the thin blade is straight and not twisted along its length. Re-tightening the handle tensions the blade and locks it at the desired angle relative to the frame. The short steady bar nearest the handle is held securely between finger and thumb while the handle is tightened to ensure the blade remains at the desired angle. Unlike the fretsaw the coping saw blade has holding pins which lock securely into the angled slots of the rotatable blade holders. Gentle curves are achieved by slowly turning the whole frame by means of the handle while continuing to cut steadily. A coping saw with wooden handle but no bladetools, saws, steel , clamps, metalwork, woodwork, carpentry, early settlers, pioneers, market gardeners, moorabbin, bentleigh, cheltenham, fretsaw, coping saw, bowsaw, blacksmiths,

Mr John Wilson Gillie was born on the 31st of March 1864. On the 31st of July 1880 he was apprenticed for four years to J.J. Wilson and Sons, Nautical Instrument Makers of Sunderland. Following the apprenticeship he spent six months to a year as an ‘improver’ in Glasgow, and then started a new company ‘Wilson and Gillie’ in North Shields. At this time sail had just given way to steam and wooden ships to steel, and the railways were competing with colliers for the carrying of coal from the North East of England to London and the South. In 1858 only seven out of 44 shipyards on the Tyne were using iron, but by 1862 there were ten, employing around 4,000 men. These changes had a significant effect on nautical instrument manufacturers, as the magnetic compass for a wooden sailing vessel was very simple and required little in the way of compensation. For steel vessels much more was required and this was a period of great development, both in the compass bowl and the binnacle in which it was housed. In 1870 Sir William Thomson (later Lord Kelvin) designed his dry card standard compass, which completely replaced all previous designs. Wilson and Gillie started as agents for the Thomson compass, but later J.W. Gillie, using similar principles, redesigned the compass suspension and patented the ‘UNIT’ standard compass. It became popular with local shipowners and shipbuilders. In 1910 the firm of John Lilley and Son (which had been established in London in 1812), found themselves in financial difficulties and were saved with the help of John Wilson Gillie, who established, on the 8th of August 1911, a new firm of John Lilley and Son Limited. John Lilley and Son had been the sole London agents for Sir William Thomson, a very enviable position during this period, when the Thomson compass led the field. Unfortunately, Mr. Lilley had quarreled with the Glasgow company, who withdrew the agency and established their own branch in London (later to become Kelvin White and Hutton). On November 7th 1913, the firm of John Lilley and Son Limited of London amalgamated with Wilson and Gillie of North Shields, and after this date instruments manufactured by the two companies bore the name John Lilley and Son Limited of London and North Shields. During the 1930s many of the London nautical instrument makers were in difficulties, including John Lilley and Son Limited and Reynolds and Son, Dobbie and Clyde Limited, and Mr. J.W. Gillie arranged an amalgamation between these two companies. The new firm became Lilley and Reynolds Limited. In 1943, with estate duties in mind, the North Shields company was reconstituted and took the name of John Lilley and Gillie Limited, although the shareholders, directors and personnel remained unchanged In the early 1970s Lilley and Gillie developed close links with Observator in Rotterdam, who manufactured one of the first fully reliable transmitting magnetic compass systems. The Observator shareholders, Holland America Line, bought the share capital of John Lilley and Gillie Limited., but retained all the personnel and the directors. (See Links for more information)A significant item of early 20th century marine navigational equipment made by a leading manufacturer in the field from a company that is still producing marine navigational instruments today. John Lilleys company began in 1812 growing at a time when the transition of compasses from timber ships, to steel vessels. Compasses at this time required a method of compensation to allow their inclusion in steel vessels without magnetic deviation. This therefore was a period of great development, both in the compass bowl and the binnacle in which it was housed and the Lilley company were leaders in the field. Ships binnacle, wood with brass fittings, consists of 2 brass lamp holders, place for compass, Also has an inclinometer with a scale 40 to 0 to 40, one red and one green iron Kelvin compensation balls, one on each side of binnacle denoting port and starboard, a brass cylinder attached perpendicular at the rear for storing a Flinders Bar, 2 hinged cupboards containing adjustable wooden racks with drilled holes in them to hold iron Heeling error magnets.Textured brass plate attached to front stating "JOHN LILLEY & SON LTD (WILSON & GILLIE), NAUTICAL INSTRUMENT MAKERS, NORTH SHIELDS" . Inclinometer has "JOHN LILLEY & SON LTD (Wilson & Gillie) LONDON & NORTH SHIELDS" engraved. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, binnacle, john lillie & son ltd, compass

The Kiewa Hydro Electric Scheme managers organized YMCA representatives to organize activities for the thousands of workers employed on the Kiewa Hydro Electric Scheme. See: "Below Bogong - A History of Mount Beauty" compiled by Di Edmondson. Chapter 9, Page 297. The Story of Kiewa by Alex McCullough The Athletics Club was one of the first clubs and proved very popular1. b/w photo of weightlifting team 2. x7 photos of various weightlifting team 3. 135 mm x 85 mm b/w photo of men skipping 4. 135 mm x 85 mm b/w photo of men wrestling 5. 135 mm x 85 mm b/w photo of boys rope climbing 6. 135 mm x 85 mm b/w photo of man on parallel barsgymnastics, athletics, sport, ymca, mt beauty

Bullock drays were commonly used to transport heavy loads, such as the wool clip from a large property, across long distances.In the 19th century. The yoke is worn on the neck of the bullocks and is secured by a belt around the neck. The bullocks push the yoke with their shoulders, hump and neck; therefore, the work is performed.This yoke seems to be handmade on a farm. It was used in the Kiewa ValleyA wooden bar behind a harnessed horse. It is used to balance the pull of a draught horse or other draft animal (bullock) when pulling a vehicle like a plough. A yoke is an interface between bullock power and actual work to be performed.This yoke is timber with a shape to form curved depressions that allow it to rest across the necks of two bullocks to keep them together.The bullocks were chained to the steel oblong ring - one at each end of the yoke. The middle ring was attached to the bullock or vehicle in front of them.bullock yoke, swingletree, farm equipment, plough

Printed form dated 13 July 1864. After a meeting held at the Commercial Hotel, it was resolved that Joseph King Smith of Sandhurst be a Trustee for the Branch of the Society, in place of John Wotton, deceased. Signed by Witnesses, ? Jas. Murray, G. ?, and Adolph Bar? Also signed by the Secretary, Jas. Thos Holl, Signed by Trustee Joseph King Smith, James Madeley, District Secretary. Bendigo District and F Le Mastrier? D.S. Court King of the Forest Court Seal at the bottom of the page.societies, aof, correspondence, ancient order of foresters no. 3770 collection - correspondence, court king of the forest, glennon?, commercial hotel, joseph king smith, john wotton, ? jas murray, adolph bar?, jas thos holl, james madeley, f le mastrier?

Object. An elaborate item, with a light blue grosgrain ribbon background. An arched and a straight bar at the top state CORONA LODGE. A crown with fanned background, under which is a plinth and a clasp stating No 195 V.C. Below this is an inverted ^shape, highly engraved with a Greek eternity pattern, and decorative scrolling. From this shape hangs a rectangular shape 2 cms x 1.7 cms, which has a fine decorative edge, and a central motif. The underside of the ^shape is engraved as above.Front: CORONA LODGE No195 V.C. Back: Presented to Wor.Bro.W.R.WRIGHT I.P.M. by the BENDIGO CORONA LODGE No 195 V.C. 25.8.20?1organisation, masonic lodge, corona lodge medallion

The photograph that appears in this frame is a copy. The original is catalogued at 01314. Sgt David Hamilton Pruden, 404, enlisted from Newry and was killed at Koster River in the Trasnvaal on 21 July 1900, and was buried at Rustenburg cemetery. He is commemorated in a large tablet in the Stratford Mechanics' Institute. This photograph originally hung in the Stratford Mechanics' Institute. A framed sepia copy photographic print of a head and shoulders portrait of a young man in dress uniform of the Victorian Mounted Rifles, labelled Pte D.Pruden and presumed to be David Hamilton Pruden, who died in Africa during the Boer War. The frame, of crossed wooden bars with decorative metal at each crossing, appears to be commercially produced. Backing support for the frame is a section of an 1893 calender for an unknown insurance firm, agent J.B Kelly at Stratford, which has been detached for separate cataloguing.boer war 1899-1902

Document. the State Elections, the Victorian Alliance Platform, Questions for Candidates at the State Elections. 1. The question of the Hours of Trading of Licensed Liquor Bars to be submitted to the people by a Referendum. 2. The Abolition of the three-fifths per cent, necessary to carry No-Licence at the Local Option Poll. 3. The Counting of the Aggregate Votes for No-Licence for the State. 4. Abolition of Grocers' Liquor Licences. If elected, will you support the foregoing proposals? And return to General Secretary. Victorian Alliance, 136 Swanston Street, Melbourne.organisation, community, abstinence society

TPI 1973; Australia Remembers 1995; RSL ; Returned from Active Service; Ex POW Assn; War Chest; Life Member Rinfwood RSL blood donor; WW1 Women's Badge with two bars; The Royal British Legion; Women of Australia badge WW2 with one star; RSL Women's Auxilliary; Australian Women's Army Srevice Assn Vic; Australia Lapel badge; 12th Bn Assn badge; TB Sailor, Soldier Airman Assn Vic.

Yields information about the operations of the BTPS at the depot possibly at the time of the start of operations in Wendouree Parade.Set of 8 AGFA blue and white plastic mount 35mm slides of depot activities during late or Nov. 1974, possibly the day that 40 did its first trips on Wendouree Parade. .1 - 40 leaving the shed. .2 - 26 and 27 on 3 road .3 - 27 and 26 shunting with a tow bar. .4 - ditto .5 - ditto .6 - 14 on 1 road .7 - 27 on access track .8 - truck used by the BTPS to construct the overhead. Various notations by John as to the slide number and the trams in pencil and ink.tramways, trams, btps, commissioning, depot, tram 40, tram 26, tram 14, tram 27

Black and White photograph contained with Reg. Item 1902 - Photo Album from Keith Kings to Les Denmead 1970. Photograph of SEC Geelong, 32 in Malop St at Moorabool St. City, 2/51. Has CML building in the background and other buildings in Malop St. Also has a bar style traffic light in the left hand edge of the photo. Keith Kings No. E(q)(1) Scanning: i - image file, p - presentation file, b - back of photograph.Stamp in top left hand corner and handwritten number with "K.S. Kings No. E(q)(1) Copyright reserved". In blue ink "Geelong / No. 32 / Malop St. at Moorabool St., City / 2/51"trams, tramways, geelong, malop st, moorabool st, tram 32

Photo of tram No. 38 in Sturt St. at Lydiard St. in transition of having dash canopy lighting fitted. Tiger stripes on bumper bars, and white stripe under windscreen. Has large reflective tri-angles. Has Castrol Ad on roof of tram. In background is old Commonwealth bank building, Mutual Life Association building. On tram stop pole is section sign, 'Cars stop here' sign and it is painted as a compulsory stop. Taken 26-12-1960.SEC Ballarat No. 38 in Sturt St. 26-12-60' in blue ink and 'W.Jack' stamped in purple inktramways, trams, sturt st., dash canopy lights, tram stops, tram 38

Set of two tram crew number badges, used by MMTB drivers and conductors or other uniformed employees. .1 - "08" - made from two cast numbers fixed to a bar top and bottom - may have been part of a larger item, given to the left hand side of the item. Made by Stokes and Sons Melbourne. .2 - "3" - made from brass, gold plated? Has two small clips on the rear and fitted with two clips for fitting to a uniform.trams, tramways, mmtb, badges, crews, drivers, conductors, personnel

Black and White Copy Negative Photograph of U206 in Mount Alexander Road, with the NMETL brick powerhouse behind. The driver is hopping off the tram (to attend points) while the conductor is on the rear platform. Note the drop bars rather than folding gates as on other cars. The Cooling tower is not in the photo, indicating it has been demolished. The Power Station was demolished in 1925 (check). In the background is the St Georges Anglican church which was built during 1925. Sun angle - possibly winter.trams, tramways, u class, mount alexander road, essendon depot, nmetl, tram 206, mmtb

This book was part of a large group of books referred to as the Pattison Collection, which belonged to the Warrnambool Public Library, part of the Warrnambool Mechanics’ Institute. About RALPH ERIC PATTISON and the ‘PATTISON COLLECTION’ The ‘Pattison Collection’ is a collection of books and records that was originally owned by the Warrnambool Mechanics’ Institute, founded in Warrnambool in 1853. By 1886 the Warrnambool Mechanics’ Institute (WMI) had grown to have a Library, Museum and Fine Arts Gallery, with a collection of “… choice productions of art and valuable specimens in almost every branch and many wonderful national curiosities are now to be seen there, including historic relics of the town and district.” It later included a School of Design. Although it was very well patronised, the WMI was led to ask the City Council to take it over in 1911 due to lack of financial support. In 1935 Ralph Pattison was appointed as City Librarian to establish and organise the Warrnambool Public Library as it was then called. Ralph Eric Pattison was born in Rockhampton, Queensland, in 1891. He married Maude Swan from Warrnambool in 1920 and they set up home in Warrnambool. In 1935 when Pattison accepted the position as City Librarian for the Warrnambool City Council his huge challenge was to make a functional library within two rooms of the Mechanics’ Institute. He tirelessly cleaned, cleared and sorted a disarrayed collection of old books, jars of preserved specimens and other items reserved for exhibition in the city’s museum. He developed and updated the library with a wide variety of books for all tastes, including reference books for students; a difficult task to fulfil during the years following the Depression. He converted all of the lower areas of the building into a library, reference room and reading room for members and the public. The books were sorted and stored using a cataloguing and card index system that he had developed himself. He also prepared the upper floor of the building and established the Art Gallery and later the Museum, a place to exhibit the many old relics that had been stored for years for this purpose. One of the treasures he found was a beautiful ancient clock, which he repaired, restored and enjoyed using in his office during the years of his service there. Ralph Pattison was described as “a meticulous gentleman whose punctuality, floorless courtesy and distinctive neat dress were hallmarks of his character, and ‘his’ clock controlled his daily routine and his opening and closing of the library’s large heavy doors to the minute.” Pattison took leave from 1942 to 1945 to serve in the Royal Australian Navy, Volunteer Reserve as Lieutenant. A few years later he converted one of the Museum’s rooms into a Children’s Library, stocking it with suitable books for the younger generation. This was an instant success. In the 1950’s he had the honour of being appointed to the Victorian Library Board and received more inspiration from the monthly conferences in Melbourne. He was sadly retired in 1959 after over 23 years of service, due to the fact that he had gone over the working age of council officers. However, he continued to take a very keen interest in the continual development of the Library until his death in 1969. THE NEW WARRNAMBOOL LIBRARY When the WMI building was pulled down in 1963 a new civic building was erected on the site and the new Warrnambool Library, on behalf of the City Council, took over all the holdings of the WMI. At this time some of the items were separated and identified as the ‘Pattison Collection’, named after Pattison. Eventually, the components of the WMI were distributed from the Warrnambool Library to various places, including the Art Gallery, Historical Society and Flagstaff Hill. Later some were even distributed to other regional branches of Corangamite Regional Library and passed to and fro. It is difficult now to trace just where all of the items have ended up. The books at Flagstaff Hill Maritime Village generally display stamps and markings from Pattison as well as a variety of other institutions including the Mechanics’ Institute itself. WARRNAMBOOL MECHANICS’ INSTITUTE Warrnambool's Mechanics' Institute (or Institution as it was sometimes called) was one of the earliest in Victoria. On 17th October 1853, a meeting was held where it was resolved to request the Lieutenant Governor of the Colony to grant land for the erection of a Mechanics' Institutes building. A committee was formed at the meeting and Richard Osburne chaired the first meeting of this committee. The land on the North West corner of Banyan and Merri Streets was granted but there were no funds to erect the building. The Formal Rights of the Warrnambool Mechanics' Institute's encompassed its aims and these were officially adopted in1859; "This Institution has for its object the diffusion of literary, scientific, and other useful knowledge amongst its members, excluding all controversial subjects, religious or political. These objects are sought to be obtained by means of a circulating library, a reading room, the establishment of classes, debates, and the occasional delivery of lectures on natural and experimental philosophy, mechanics, astronomy, chemistry, natural history, literature, and the useful and ornamental arts, particularly those which have a more immediate reference to the colony." The Warrnambool Mechanics' Institute opened its first reading room in November 1884 in the National School building at the corner of Banyan and Timor Streets. The Institute was funded by member subscription, payable on a quarterly, half-yearly or yearly basis. Samuel Hannaford, the Manager of the Warrnambool Bank of Australasia, was the first Honorary Secretary of the Mechanics' Institutes, and an early President and Vice-President. He also gave several of the early lectures in the Reading Room. Another early Secretary, Librarian and lecturer was Marmaduke Fisher, the teacher at the National School. Lecture topics included The Poets and Poetry of Ireland', 'The Birth and Development of the Earth', 'The Vertebrae - with Remarks on the pleasures resulting from the study of Natural History' and 'Architecture'. In 1856 the Reading Room was moved to James Hider's shop in Timor Street, and by 1864 it was located in the bookshop of Davies and Read. In the 1860s the Mechanics' Institute struggled as membership waned but in 1866, after a series of fundraising efforts, the committee was able to purchase land in Liebig Street, on a site then called Market Square, between the weighbridge and the fire station. A Mechanics' Institute building was opened at this site in August 1871. The following year four more rooms were added to the main Reading Room and in 1873 the Artisan School of Design was incorporated into the Institute. The same year Joseph Archibald established a Museum; however, it deteriorated when he was transferred to Bendigo in 1877. In 1880, with Archibald's return to Warrnambool, the Museum was re-established, and in 1885 a new building was built at the back of the Institute to accommodate the re-created School of Design, the Art Gallery and the Museum. In 1887 the Museum section was moved to the former courthouse in Timor Street (for some time the walls of the building formed part of the TAFE cafeteria but all is now demolished)). In 1911 the Museum was transferred back to the original building and the management of the Mechanics' Institute was handed over to the Warrnambool City Council. The Museum and Art Gallery became one and housed many fine works of art, and the Library continued to grow. The building was well patronised, with records showing that at the beginning of the 20th century there were between 500 and 800 visitors. During World War One the monthly figures were in the thousands, with 3,400 people visiting in January 1915. The Museum was a much - loved Institution in Warrnambool until the contents of the Museum and Art Gallery were removed to make room for the Warrnambool City Council Engineers' Department. The contents were stored but many of the items were scattered or lost. When the original building was demolished the site became occupied by the Civic Centre, which included the new City Library. (The library was temporarily located in the old Palais building in Koroit Street.) In the process of reorganisation the Collection was distributed amongst the community groups: -The new City Library took some of the historical books and some important documents, historic photographs and newspapers. -The Art Gallery kept the 19th Century art collection and some of the artefacts from the museum. -The Historical Society has some items -The State Museum has some items -Some items were destroyed -Flagstaff Hill Maritime Village has old newspapers, Government Gazettes, most of the Mechanics' Institute Library, ledgers and documents connected to the Mechanics' Institute Library, some framed and unframed artworks and some photographs. The Warrnambool Mechanics' Institute Library book collection is deemed to be of great importance because it is one of the few collections in an almost intact state, and many of the books are now very rare and of great value. The Pattison Collection, along with other items at Flagstaff Hill Maritime Village, was originally part of the Warrnambool Mechanics' Institute’s collection. The Warrnambool Mechanics’ Institute Collection is primarily significant in its totality, rather than for the individual objects it contains. Its contents are highly representative of the development of Mechanics' Institute libraries across Australia, particularly Victoria. A diversity of publications and themes has been amassed, and these provide clues to our understanding of the nature of and changes in the reading habits of Victorians from the 1850s to the middle of the 20th century. The collection also highlights the Warrnambool community’s commitment to the Mechanics’ Institute, reading, literacy and learning in the regions, and proves that access to knowledge was not impeded by distance. These items help to provide a more complete picture of our community’s ideals and aspirations. The Warrnambool Mechanics Institute book collection has historical and social significance for its strong association with the Mechanics Institute movement and the important role it played in the intellectual, cultural and social development of people throughout the latter part of the nineteenth century and the early twentieth century. The collection of books is a rare example of an early lending library and its significance is enhanced by the survival of an original collection of many volumes. The Warrnambool Mechanics' Institute’s publication collection is of both local and state significance. Farewell Miss Julie Logan Author: J M Barrie Publisher: Hodder and Stoughton Date: 1932 Further Information: The Uniform Edition of the works of J M BarrieThe label on the spine cover with typed text PAT FIC BAR Pastedown frontend paper has a sticker from Warrnambool Mechanics Institute and Free Library covered by a sticker from Corangamite Regional Library Service Front loose endpaper has a stamp from Warrnambool Mechanics Institute Front loose endpaper has a stamp from Corangamite Regional Library Service flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, book, pattison collection, warrnambool library, warrnambool mechanics’ institute, ralph eric pattison, corangamite regional library service, warrnambool city librarian, mechanics’ institute library, victorian library board, warrnambool books and records, warrnambool children’s library, farewell miss julie logan, j m barrie

This item is from the ‘Pattison Collection’, a collection of books and records that was originally owned by the Warrnambool Mechanics’ Institute, which was founded in Warrnambool in 1853. By 1886 the Warrnambool Mechanics’ Institute (WMI) had grown to have a Library, Museum and Fine Arts Gallery, with a collection of “… choice productions of art, and valuable specimens in almost every branch and many wonderful national curiosities are now to be seen there, including historic relics of the town and district.” It later included a School of Design. Although it was very well patronised, the lack of financial support led the WMI in 1911 to ask the City Council to take it over. In 1935 Ralph Pattison was appointed as City Librarian to establish and organise the Warrnambool Library as it was then called. When the WMI building was pulled down in 1963 a new civic building was erected on the site and the new Warrnambool Library, on behalf of the City Council, took over all the holdings of the WMI. At this time some of the items were separated and identified as the ‘Pattison Collection’, named after Ralph Pattison. Eventually the components of the WMI were distributed from the Warrnambool Library to various places, including the Art Gallery, Historical Society and Flagstaff Hill. Later some were even distributed to other regional branches of Corangamite Regional Library and passed to and fro. It is difficult now to trace just where all of the items have ended up. The books at Flagstaff Hill Maritime Village generally display stamps and markings from Pattison as well as a variety of other institutions including the Mechanics’ Institute itself. RALPH ERIC PATTISON Ralph Eric Pattison was born in Rockhampton, Queensland, in 1891. He married Maude Swan from Warrnambool in 1920 and they set up home in Warrnambool. In 1935 Pattison accepted a position as City Librarian for the Warrnambool City Council. His huge challenge was to make a functional library within two rooms of the Mechanics’ Institute. He tirelessly cleaned, cleared and sorted a disarrayed collection of old books, jars of preserved specimens and other items reserved for exhibition in the city’s museum. He developed and updated the library with a wide variety of books for all tastes, including reference books for students; a difficult task to fulfil during the years following the Depression. He converted all of the lower area of the building into a library, reference room and reading room for members and the public. The books were sorted and stored using a cataloguing and card index system that he had developed himself. He also prepared the upper floor of the building and established the Art Gallery and later the Museum, a place to exhibit the many old relics that had been stored for years for this purpose. One of the treasures he found was a beautiful ancient clock, which he repaired, restored and enjoyed using in his office during the years of his service there. Ralph Pattison was described as “a meticulous gentleman whose punctuality, floorless courtesy and distinctive neat dress were hallmarks of his character, and ‘his’ clock controlled his daily routine, and his opening and closing of the library’s large heavy doors to the minute.” Pattison took leave during 1942 to 1945 to serve in the Royal Australian Navy, Volunteer Reserve as Lieutenant. A few years later he converted one of the Museum’s rooms into a Children’s Library, stocking it with suitable books for the younger generation. This was an instant success. In the 1950’s he had the honour of being appointed to the Victorian Library Board and received more inspiration from the monthly conferences in Melbourne. He was sadly retired in 1959 after over 23 years of service, due to the fact that he had gone over the working age of council officers. However he continued to take a very keen interest in the continual development of the Library until his death in 1969. The Pattison Collection, along with other items at Flagstaff Hill Maritime Village, was originally part of the Warrnambool Mechanics' Institute’s collection. The Warrnambool Mechanics’ Institute Collection is primarily significant in its totality, rather than for the individual objects it contains. Its contents are highly representative of the development of Mechanics' Institute libraries across Australia, particularly Victoria. A diversity of publications and themes has been amassed, and these provide clues to our understanding of the nature of and changes in the reading habits of Victorians from the 1850s to the middle of the 20th century. The collection also highlights the Warrnambool community’s commitment to the Mechanics’ Institute, reading, literacy and learning in the regions, and proves that access to knowledge was not impeded by distance. These items help to provide a more complete picture of our community’s ideals and aspirations. The Warrnambool Mechanics Institute book collection has historical and social significance for its strong association with the Mechanics Institute movement and the important role it played in the intellectual, cultural and social development of people throughout the latter part of the nineteenth century and the early twentieth century. The collection of books is a rare example of an early lending library and its significance is enhanced by the survival of an original collection of many volumes. The Warrnambool Mechanics' Institute’s publication collection is of both local and state significance. Auld Light Idylls The works of J. M. Barrie Author: J M Barrie Publisher: Hodder and Stoughton Date: 1924Label on spine cover with typed text PAT FIC BAR Pastedown front endpaper has sticker from Warrnambool Mechanics Institute and Free Library covered by a sticker from Corangamite Regional Library Service Front loose endpaper has a stamp from Corangamite Regional Library Service Front loose endpaper has a sticker from Warrnambool Mechanics Institute warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, book, pattison collection, warrnambool library, warrnambool mechanics’ institute, ralph eric pattison, corangamite regional library service, warrnambool city librarian, mechanics’ institute library, victorian library board, warrnambool books and records, warrnambool children’s library, great ocean road, auld light idylls, j m barrie

The portrait was commissioned in 1884, near the end of Stawell's term of office. The portrait was commissioned at the same time as those of Redmond Barry and Justice Molesworth. The total cost of all three paintings was 1200 pounds. Sir William Stawell arrived in Victoria in 1842; he quickly established a reputation for himself at the Bar. After the separation of the Port Phillip colony from New South Wales, Sir William served as the attorney general in the first representative government and was the leading prosecutor in the Eureka trials. Sir William was appointed as Chief Justice of the Supreme Court in 1857, serving 29 years in the post. In addition the township of Stawell was named after the recently appointed Chief Justice in 1858. The portrait is of historical significance as a portrait of Sir William Stawell.Full length portrait in oils of Sir William Stawell. Stawell is seated and dressed in his judicial robes. Signed and dated 1887 lower right hand corner of the painting. Plaque identifying subject. The Hon. Sir W.F. Stawell.K.C.M.C Chief Justice of the Supreme Court 1857-1886judges, william stawell

The Water supply in Moorabbin Shire was from streams - Elster Creek - and wells so that all people , -settlers, market gardeners, and travellers - needed to take a container with them when they were away from the household.. The Canvas water bag was convenient, easy to make and could be hung on a tree branch or carried on the horse, wagon, plough or later on the bumper bar of a car or truck. The canvas water bag allowed any wind or airflow to cool down the water, even on very hot days, 21G could be 21Gills = 5pints= 2Quarts = 1/2 Gallon approx. and suitable for a day working in the field = 4 Litres similar to a mineral water bottle today.The water bag like this was the source of drinking water for market gardeners in Moorabbin Shire either when working in the fields or .travelling to the markets with their wagons loaded with produce.A canvas water bag, with an iron handle and plastic or bakelite drinking spout.H.L. HARDWARE / ...KFITH 21G, water bags, elster creek, horse drawn wagons, early settlers, market gardeners, cooking utensils, castiron cooking pots, blacksmiths, moorabbin shire, bentleigh, mckinnon, highett, cheltenham, melbourne,

Opened in 1857, St Kilda Railway Station is the oldest surviving railway station in Victoria. In the 1920s it was the second busiest station in Victoria after Flinders Street. Competition from motor traffic led to the decline of the station and of St Kilda itself. Services on the line were reduced in 1981 and it was converted to a tram route in November 1987. In 1989, several fires damaged the timber station building and by December, the roof had been destroyed. Metropol Apartments at 60 & 64 Fitzroy Street, completed by 2002, were constructed on the station forecourt site. The former station has been heavily redeveloped and now houses bars, restaurants and retail outlets. Colour photographst kilda, st kilda railway station, st kilda train, fitzroy street

Enlarged copy of photograph, original held by Myers Family, formerly of Barmah. Cafe in photograph served meals, afternoon tea. Meals 1/6 each (18 c), pot of tea 9 d (8 c), sandwiches 1/- (10 c), wages 1 pound per week ($2). 1930. Smaller duplicate also. Shop had been a jewellery store beforehand. Later proprietors: Mr and Mrs Nicholls, Misses May and Annie Maher, Mr and Mrs H. Hedges, Mr and Mrs N. Cuthbert, Mr and Mrs J. King, Mr and Mrs Meola, Turkish Cafe, C.Y.S.S. Centre, Pizza bar.Black and white photograph of early cafe in Hogan Street, Tatura, operated by Nell Myers and Sarah Colliver, 19301930 - Nell Myers and Sarah (girlie) Colliver Boomerang Cafe (177) Hogan Street, Tatura.nell myers, sarah colliver, boomerang cafe tatura, n. lenehan

Versabraille system is a self-contained braille information system for use with audio cassettes for reading and writing braille. The controls include an eject button, variable audio speed and volume sliders, braille control keys for writing, editing, and audio record/playback, a 20-character braille display with text advance bar, text backup key, text access keys for chapters, pages, paragraphs or words, a place indicator, an "add new chapter" key, and a pair of buttons with unknown function. The unit takes ordinary audio cassette tapes. On the back is a 24-contact IB/P connector, a pair of connectors of unknown function, and a power connector for the included 120V power adapter. Light brown coloured plastic square object with brown covering box and transformer with cord Versa Braille system Tele Sensory Systemsbraille equipment, equipment

Photograph of Geelong No. 16 at the Chilwell terminus 23/6/1949, with the J. Cahill Milk bar, shop in the background. Would appear the driver / motorman has just entered the end to drive back into town. Both poles are still on the overhead. Tram has the destination of Chilwell. Originally thought that the photo was by Ken McCarthy, via Bill Parkinson - see email from Greg King of 13-9-2018, but on locating the negative from the Wal Jack collection, received by Keith Kings, record photographer revised. See item 9050 for a print with additional details. i1 - digital image as received. i2 - scan of negative at 3200dpi added 18/6/2020.Yields information about the Chilwell terminus and Geelong 16.Digital Image and Negative scan. trams, tramways, geelong, chilwell, tram 16