Annual report of the Braille & Talking Book Library including Minutes of the AGM, Board of Director's Report, President's report and financial statements. Items also included are: the legacy of Mary Daly (consisting of 2 houses), launch on March 5 of LBP LTD by Minister of the Arts Ian Cathie, the death of Stephen Murray-Smith, the revaluation of land and buildings from 1918 value of 18000 pounds to $1,250,000, purchase of small property at 46 Commercial Road (opposite Library) to alleviate over-crowding, Mike Janes joins Board, Referendum materials produced for the AEC, purchase of Versabraille, acquisition of a fax machine, implementation of computer in technical services halted, new shelving purchased for the library, and Clarke & Smith books actively being phased out.1 volume of text and illustrationsbraille and talking book library, annual report

Eva Fisher was a valued member of the AFB and wished to commission a sculpture for the grounds in the front of Paterson Hall. Noted sculptor Ian Bow was commissioned and created Urban Cycle, a six panel metal sculpture that follows the development of the local area. This plaque was placed near the sculpture and removed when Paterson Hall was renovated.Digital image of metal plaqueUrban Cycle Sculptor: Ian Bow Gift from Evangeline Anne Fisher 17th September, 1975.association for the blind, eva fisher, ian bow

The duplication of services between state based blindness and low vision agencies was not viable in the long term, with telecommunications and technology improving rapidly in the late 20th century. In 1999, a decision was made to merge the library and alternative production services of the RVIB and RBS, as a precursor to a possible larger merger in the future. Thus the National Information Library Service (NILS) was created. As part of establishing a new culture between staff who had retained their positions, a vision, mission and values statement was created under the new service name.1 digital imageNational Information Library Service Mission statement: NILS provides a recognised and specialised gateway through which people who are blind, vision impaired or who have a print disability access dynamic information and recreational reading. Vision: to enable unhindered access to knowledge, information and recreational reading for people who are blind, vision impaired or who have a print disability. Key strategic themes: Know our clients current and future needs and expectations. Explore opportunities for collaboration with other agencies, government and enterprises to source, organise and make available materials and resources of an acceptable quality. Optimise digital technology for the production and delivery of materials in an equitable, cost effective and timely way, identify opportunities for innovation by anticipating social and technological trends in the wider community. Enhance our internal capability. Establish and develop a positive and healthy NILS culture. Values: our values inform our policy, work practices, recruitment and service delivery ethic. Integrity - we are open and honest with all our stakeholders. Excellence - we strive to be superior in all we do. Innovation - we learn continuously in order to lead the way. Responsiveness - we actively listen to all our stakeholders. Equity - we focus on inclusiveness and participation for all our clients and staff. A joint venture between the Royal Victorian Institute for the Blind and the Royal Blind Society of New South Wales. royal blind society of new south wales, royal victorian institute for the blind, national information library service

Neil Maxwell holds one hand above his head, whilst the other holds a cane. "Mind your head" and "Hedging around: while they add value to homes, hedges are a nightmare" is written beneath the image. Taken from the Stonnington Leader, July 12th 2000.Colour photograph with two lines of textnon-fictionneil maxwell, elizabeth maxwell, orientation and mobility

Eva Fisher was a valued member of the AFB and wished to commission a sculpture for the grounds in the front of Paterson Hall. Noted sculptor Ian Bow was commissioned and created Urban Cycle, a seven panel metal sculpture that follows the development of the local area. Prior to receiving the commission, Ian Bow went through a period of temporary vision loss, which gave him insight into how the sculpture could be appreciated by the blind and low vision community. The different stages are: Harmony - Two pelicans amongst reeds. Intrusion - Frog, kookaburra, mice, fish, lizard and butterfly. Expansion - Doors, windows and roofs under tree canopies. Industry - A factory with large chimney blowing smoke. Density - Multiple boxes, some with figures inside, are crowded beneath a bridge and dome. Decay - Boxes with broken doors and unfinished concrete. Renewal - A church with a Calvary cross over roughened surface.Heptagonal cast aluminium sculpture with seven panels arranged around a central metal pole.Thanks to the generosity of Evangeline Annie Fisher this sculpture, entitled 'Urban Cycle', was created by Ian Bow in 1975 and depicts stages of development of a city through the use of tactile forms. Further information is available at Reception. Vision Australia. Blindness, Low Vision, Opportunity.association for the blind, eva fisher, ian bow, sculpture

Booknon-fictionGathering Australia's War Memories

This belt was manufactured for military service. It is presumably a World War Two era article of Army uniform.This Army belt was presumably made and used during the World War Two era and therefore has historic value. Brown leather belt with a brass buckle. The belt has twelve holes in two rows at one end for fastening into the buckle. The very tip narrows to a point. There is light brown stitching along the edges of the belt. There are two brass studs which hold the leather in a loop of the other end. There is an additional piece of leather fixed to this looped edge for holding the other end in place. The buckle is made of a silver coloured brass and has two rods which pass through two of the twelve holes for fastening. The buckle also exhibits blue/green copper corrosion in several areas. belt, war, uniform, army, royal australian army, world war two, ww2, wwii, second world war

This legging is part of a pair of leggings which presumably would have been worn by a cavalry soldier in the Royal Australian Army to protect the lower legs when riding in armed conflict. This item most likely dates to the World War One era.As an article of WWI protective clothing for use in armed conflict by a cavalry soldier, this item is of historic value. Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front, which is attached by four metallic nails. The strap then wraps around the gaiter and passes through a second leather loop at the front, which is also attached by four corroded metallic nails. This strap (along with a shorter strap that is sewn and nailed into the top of the legging) pass through two buckles. The upper buckle is made of brass and the lower is made of steel. The straps then tuck under three final leather loops, two of which are bolted to the legging with three corroded nails. There should be a third loop here that is missing. Top corner of legging also carries a small corroded metal hook, presumably to hold layers together firmly.legging, gaiter, first world war, world war one, world war 1, wwi, ww1, war, army, uniform, royal australian army, the great war

This legging is part of a pair of leggings which presumably would have been worn by a cavalry soldier in the Royal Australian Army to protect the lower legs when riding in armed conflict. This item most likely dates to the World War One era.As an article of WWI protective clothing for use in armed conflict by a cavalry soldier, this item is of historic value. Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front, which is attached by four metallic nails. The strap then wraps around the gaiter and passes through a second leather loop at the front, which is also attached by four corroded metallic nails. This strap (along with a shorter strap that is sewn and nailed into the top of the legging) pass through two buckles at the top. Both buckles are made of brass. The straps then tuck under four final leather loops, two of which are bolted to the legging with three corroded nails. Top of legging also carries a small brass hook.legging, gaiter, first world war, world war one, world war 1, wwi, ww1, war, army, uniform, royal australian army, the great war

In November 1932, Frank Packer and Ted Theodore purchased the World, a struggling afternoon newspaper owned and operated by the Australian Workers' Union in Sydney, and re-branded it as the Star. Approached by Sir Hugh Denison, who enjoyed a monopoly over the Sydney newspaper market, they were offered 86,500 Pounds to close the paper if they agreed not to publish a morning, evening or Sunday newspaper within a 300-mile radius of the city for three years. Packer and Theodore accepted the offer, the the Weekly was a way of skirting the embargo, it would be a women's newspaper, and it would be self-sufficient. George Warnecke envisioned the Weekly as a publication with an Australian outlook, appealing to all sections of society, and offering an element of news in every article, whether it concern fashion, cookery, or parenting. When the first issue appeared in Sydney on June 10, 1933, it was printed in black-and-white newspaper format and priced at twopence per copy, "the biggest value in the world". It had sold out by lunchtime. 4 x Australian Women's Weekly magazines. Dated:- 1. December 4, 1943; 2. July 29, 1944; 3. August 5, 1944; and 4. September 2, 1944. All were priced at 4d.magazines

This is the earliest known photo of an Australian Rules football team in the Bacchus Marsh area. The photo is of 27 men and two boys standing in front of the Evans Pavilion at Maddingley Park Bacchus Marsh. The image shows players, officials and trainers, the players wearing early twentieth century playing guernseys featuring front fastenings. Some are wearing knickerbockers, some long trousers. Trainers have their towels slung over their shoulders. Men in civilian clothes, possibly club officials, are wearing suits and hats. The boys and two of the players are wearing caps, one player wearing a hat. The central figure, possibly the captain, is holding a football which has the initials B M I F C. These initials stand for "Bacchus Marsh Imperial Football Club". At this time, many football clubs used the word "imperial" in their title. This team may possibly have had the nick-name of "Imperials".This item has historic and social significance as the earliest image of one of the early sporting teams of Bacchus Marsh and district. It is evidence of the growth of importance of sport, in this case Australian Rules football, as a cultural and social activity central to the Australian ethos. It is also evidence of the dominance of the masculine ethos in the Australian culture of this time. The image has strong research value for the information it conveys about this particular club and its early participants.Photographic reproduction of earlier photographHand written below photograph "Bacchus Marsh Football Club 1901." The names Fred Pearce and Jack Bence with arrows indicating the players identified.bacchus marsh imperial football club, australian rules football

Photographs belonging to Brigadier Lowen. Brig Lowen served in 2/5 Australian Infantry Battalion in WWIIHistorical photographs provide life and experience of Brigadier Lowen leading up to WWII and during WWII. Very valuable for research purposePhotos Album and scrap book circa 1935-1945, most photos have commentary from Brig Lowen, strong historical value of Brig Lowen's experience during that period. There are also other documents and photos large numbers of photographs including certificates and documents5/6 rvr, bhq, birg lowen, 2/5th bn

Button distributed to and worn by Australian Nursing Federation (ANF) members. The ANF has been campaigning for more funding and qualified nurses to improve the quality of aged care for the past several decades, and continues to do so. Aged care funding and commitment to workforce improvements were a particular focus of enterprise bargaining for the Victorian Branch around 2006-2011, and similar issues formed the basis of a large federal ANF campaign conducted around the same time entitled 'Because we care'. The Royal Australian Nursing Federation became the Australian Nursing Federation (ANF) in 1989, and then became the Australian Nursing and Midwifery Federation in 2013. This historical background suggests the badge is from around 2006 to 2011.Circular red, white and blue plastic badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with 'VALUE AGED CARE NURSING PROPERLY FOR BETTER RESIDENT CARE' and the ANF [Australian Nursing Federation] website address of the time (www.anfvic.asn.au).nursing, nurses, unionism, trade unions, aged care, funding, badges, buttons, pins, labour history, staffing, wages, workforce, patient care, australian nursing federation, campaigning

This table was found in the shed and restored in the 1990's by lightstation staff. The late nineteenth century cedar table has turned legs, a front drawer with brass knob pull (this may not be original). The wood has lost its original finish. Despite this, it has first level contributory significance for its historic value as an original furnishing that has remained at the lightstation since the nineteenth century.It has first level contributory significance for its historic value as an original furnishing that has remained at the lightstation since the nineteenth century.Australian cedar table with turned legs and front drawer with brass keyhole and wooden knob. Unpainted.

This device was used to measure surface wind speed and direction. This anemometer was located on a concrete pad outside room 2.15 on a steel pole. The pole was considered unsafe and the anemometer was relocated to it's current position. When lowering the pole it fell over and was badly damaged. The Bureau of Meteorology donated it to the museum. It was then repaired and restored. The central pole on which it is mounted is galvanised iron pipe painted black. The anemometer, a portable device that manually measures wind speed, was a necessary instrument once common to all weather stations. The arms are attached to a vertical rod and as the wind blows, the cups rotate, making the rod spin. The stronger the wind blows, the faster the rod spins. The anemometer counts the number of rotations, or turns, which is used to calculate wind speed, surface wind and direction. They were designed to be durable to withstand the corrosive environment and strong winds expected at coastal sites such as those at Gabo Island. Anemometers existed in the nineteenth century and their design was improved by various experts including John Robinson in 1846, John Patterson in 1926, Brevoort and Joiner in 1935 and Derek Watson in 1991 who added wind direction measurement to its functions. This example was made for the Bureau of Meteorology by the Melbourne instrument company, Synchrotac, which became registered and incorporated on 26 July 1966. It is now displayed inside the building. A good example of its kind, the anemometer has first level contributory significance for its historic value and provenance to the lightstation.Anemometer and tripod stand. Three cupped brass discs on rotating arms fixed to turned brass cylinder shaped shaft. Beneath discs is a lead directional wind arrow attached to a rotating arm. A wooden three legged stand with central supporting pole of black painted hardwood and attached to a white painted marine ply circular base.Under wind cups: " SYNCHROTAC / MELB. / ser.no.70/372 / MADE IN AUSTRALIA." Above wind direction arrow: "C.OF.APT..../ SYNCHROTAC / MELB ? MADE IN AUSTRALIA / ser.no.70/372"

Ornamental drop finials x 4 from the lighthouse staircase.The four cast iron drop finials are decorative architectural features that were appended to the underside of the original lighthouse staircase, which was built between 1861 and 1862.The Conservation Management Plan prepared by Australian Construction Services in 1992 states that the original stair ‘was probably the first cast iron spiral stair to be built in an Australian lighthouse.’ From about 1978 to 1988 the tower’s original staircase was gradually removed and replaced by an iron replica and by 1992 the dismantled staircase had been shifted to the old jetty storage building and was ‘awaiting disposal’. Fortunately, it was not trashed but accessioned into the Eden Killer Whale Museum where it has since been incorporated into a recreated lighthouse.The staircase was removed from the tower prior to the lightstation’s inclusion in the Victorian Heritage Register in November 1999 (H1773). which may be the earliest cast iron spiral stair built in an Australian lighthouse.The four baluster drop finials are of first level contributory significance to the Gabo Island Lightstation for their historic value and clear provenance to the tower’s original staircase erected in 1862, which may be the earliest cast iron spiral stair built in an Australian lighthouse.4 x Cylindrical shaped finials. Threaded inside. Cast iron. tapers to a point. 1. & 2. have residue paint.

Used to signal ships from lightstation. White flags are semaphore flags used for signalling alphabet letters. Salvaged from junk pile and mounted on wooden block. The identical, white hand held flags, which were used as a pair, are each stapled to a dowel. Information on both items indicates they were made by a well known flag, pennant and banner makers, Evan and Evans who were then located at 680 Elizabeth Street, Melbourne and are now in Spencer Street West Melbourne. Founded in 1877, the firm was a co designer of the Australian Flag in 1901. The flags are likely to date from c.1960 - 70 and are currently displayed in the former Keepers' quarters/ weather room mounted on a wooden block. Similar pairs of semaphore flags are held in Wilsons Promontory and Cape Nelson collections. The flags have second level contributory significance for their provenance to the lightstation and flag makers Evan & Evans. Thet have historic value for increasing our understanding of the semaphore signalling system formally used at the lightstation.Two identical white fabric flags stapled to a wooden dowel and secured to a wooden base on an angle.They have blue writing, on tags, on the flags.On tags on both flags, "EVAN & EVANS FLAGS P/L / FLAGMAKERS / 680 ELIZABETH ST / MELB. 3000 3475755"

Used on Gabo Island lightstation.This portable first aid kit comes in a lockable metal box and includes an instruction manual, smelling salts, eye cleaner, dressings, cotton wool and burns dressing. It was made in September 1976.Supplement to Royal flying doctors service of Australia.The kit has first level contributory significance for its relative completeness, historic value and provenance to the lightstation.1. White, two hinged lid, metal first aid kit. Containing: 2. Instruction manual. 3. Smelling salts. 4. Eye cleaner. 5. 6 x sterilised dressings. 6. Cotton wool. 7. Large burn dressing. (padded gauze). Lock on lid. rusted slightly on top and sides. Five screws on right side. Four screws on left back lid. Metal hinged handle on left side. Metal compartment on inside.

Possibly used as a tool to rescue people who may have been in distress in the ocean off Gabo Island. It was removed from Cape Otway and returned to Gabo Island museum. Information printed in black on the orange, plastic, ring shaped buoy confirms the item’s association with Gabo Island Lightstation and also indicates that it was made in Australia by the Rotadyne company for the Department of Transport, which oversaw lightstations between 1950 and 1982, and 1983 and 1987. The buoy was repatriated to Gabo Island from Cape Otway Lightstation in July 2015. It is unknown how it came to be there or how long it had been there.It has second level contributory significance for its historic value and provenance.Circular orange plastic ring with printed in black around ring. Ring has raised inscription. Remnants of white reflective tape in four places. White rope tied to ring through four holes in a distinctive taught crossed pattern at the back of the bouy.On front printed in black, "GABO ISLAND LIGHTSTATION", and embossed "MADE IN AUSTRALIA', 'DEPT. OF TRANSPORT / APPROVAL CERT. No 2315' On reverse, 'ROTADYNE'

The two hand-held, portable kerosene lamps each have green enamel caps over the glass. They were used from around the 1930s until 1993, and one is now located on the groundfloor level of the lighthouse and the other is in the assistant lightkeeper’s quarters. The brand name of the Point Hicks lamp, while not stated is probably Coleman, Tilley or Austramax, which were all similarly made, portable pressurised kerosene lamps. Coleman brand pressure lamps and lanterns were first made in about 1905 by American, William Coleman, and their English competitor was the firm, Tilley. The Australian company Austramax began manufacturing kerosene pressure lamps in Brunswick in 1946, making the bases and the workings by hand, turning out 1000s of lamps each week. Portable lamps were used worldwide where bright light was needed and they became essential as an emergency back-up source of light for the lightstation as well as the lantern room. Through the multiplication of light by the lighthouse lenses, they could provide a tower with a 26 nautical mile range. Lamps similar to the two Point Hicks examples can be found at Gabo Island, one of which is a green enamelled Austramax lamp; Cape Nelson (Austramax), and similar lamps are held at Cape Schanck and Cape Otway. The two Point Hicks lamps have first level contributory significance for their historic value and provenance, and as representative examples of lamps that were widely used in Australian lightstations between the 1930s and 1960s.PHLS0008.1 & PHLS0008.2 Pressurised kerosene lamp, cover over glass is made of green enamelled metal.

Was the stand for a Chance Brothers air & oil containers fitted with pump handle & pressure gauges.This type of installation was once common and relied on the lightkeeper having to pressurise the cylinders manually at regular intervals throughout the hours of darkness. The oil was fed under pressure to the burner mantle. It is all that remains of an air and kerosene oil tank installation, with each rounded side formerly supporting a heavy iron tank. The containers would have been fitted with a pump handle and pressure gauges. An intact assemblage is displayed in the AMSA offices, Canberra with a text that explains ‘This type of installation was once common and relied on the lightkeeper having to pressurise the cylinders manually at regular intervals throughout the hours of darkness’.The system involved vaporising kerosene under pressure and mixing it with air and then burning the vapour to heat an incandescent mantle. The use of kerosene as a fuel to light the lantern became the most common system of illumination from the 1860s after the oil industry in the United States began to develop. The kerosene vapour burner was created in 1901 by British inventor Arthur Kitson (1859-1937) and perfected by Chance Bros for burning a more intense light in their renowned lenses. The lamp had to be watched throughout the night in case a mantle broke, and the tanks needed to be maintained by hand-pumping each hour or so. The Point Hicks lantern was initially lit by a six-wick Trinity house kerosene burner. This was replaced by the more efficient and brighter 55mm vaporised kerosene mantle burner in 1905, and the tank stand is probably original to this apparatus. Electricity eventually replaced kerosene at Point Hicks in 1964 making the tank installation obsolete, and the last kerosene system in an Australian lighthouse was replaced in 1985. Gabo Island Lightstation has a pair of tanks that are not attached to the optical system and are no longer in the lighthouse. They are also missing the pressure gauges that were formerly attached to the top of each cylinder. An intact tank assemblage is displayed at the Cape Schanck Lighthouse Museum it is detached and not original to the lighthouse. Although corroded, the remnant Point Hicks tank stand has first level contributory importance to the lightstation. It is significant for its provenance and historical value as part of the Chance Bros vaporised kerosene burner introduced in 1905 to intensify the light and improve the efficiency of the system. The rusted iron stand rests on four short legs and is shaped like a pair of spectacles.

The large cedar desk was formerly used by the head light keeper at Point Hicks. It was made in the nineteenth century, probably by the Victorian Public Works Department (PWD) as an item of standard issue for use in government offices. The PWD operated in Victoria from 1855 to 1987 and was responsible for the design of Victoria’s major public buildings and other infrastructure including the supply of stores, furniture and equipment.The desk has turned legs, leather top and two drawers each with a pair of wooden knob hand pulls and is identical to the large desk remaining at Cape Nelson. A smaller version is at Cape Schanck, and another desk formerly at Cape Schanck is not able to be located. Gabo Island has a small cedar desk or table in the same style. Two sides of the Cape Schanck desk are stamped with the crown motif and monogram of the PWD but it is not known if the Point Hicks desk and the other nineteenth century examples are stamped with these details. There are also c.mid-twentieth century desks remaining in the collections at Wilsons Promontory and Gabo Island. officeThe Point Hicks desk has first level contributory significance for its historic values as government issued furnishing that is original to lightstation’s head keeper’s. Early, large two drawer cedar desk. Each drawer has two wooden handles. Leather insert on top of desk is worn. Commonwealth of Australia, Dept of Transport stamp with stock number on side of desk.On label on side, "C. of A. / D. O. T. / 143581"

‘Aids to Navigation’ schedule. The schedule, dated 1985, is displayed in a black-painted wooden frame attached to the wall of the lantern room. It is presented on the Commonwealth of Australia letterhead and appears to be typed. The Cape Otway lantern room also retains an ‘Aids to Navigation’ schedule of the same date and type. The Point Hicks schedule has first level contributory significance for its historic value and provenance to the lighthouse.Aids to navigation schedule. Framed in black painted timber. Screwed to wall of lighthouse.Yes

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. Crystal is a high-quality glass crafted with lead and the more intricate a piece's cuts and stems, the more value it holds for collectors. It became a popular serving option in Australia during the late 19th century and throughout the first half of the 20th century.This item comes from a collection used by a prominent citizen of Wodonga. It is representative of a style of crystal ware items of the early 20th century.A small mantel crystal clock. The central clock face has a plain silver metal surround. The winding mechanism and time adjustment dial and screws are at the back. The face of the clock indicates hours 1 to 12 in larger numbers with smaller numbers 13 to 24 in the relevant corresponding location around the face. Spacing for each minute is marked by a black line. The clock has no identifying marks.crystal ware, domestic items, crystal clocks

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved from Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. Crystal is a high-quality glass crafted with lead and the more intricate a piece's cuts and stems, the more value it holds for collectors. It became a popular serving option in Australia during the late 19th century and throughout the first half of the 20th century. This item comes from a collection used by a prominent citizen of Wodonga. It is representative of a style of crystal ware items of the early 20th century.Collection of crystal ware including a basket, salt and pepper shakers, vase, crean jug and a butter dish and knife.crystalware, domestic items

Allan "Strad" Jones was born in Stawell but lived in Wodonga from the age of two years old. He worked with several companies before establishing Strad Jones Smash Repairs in Mulqueeney Street, Wodonga. He was a courageous football player and played for the Wodonga "Bulldogs" senior team from the age of 17 years. Allan initially played as full forward, then the centre and wing positions. He suffered a serious injury playing football whilst completing National Service at Puckapunyal and was hospitalised for 5 months. Mr. Jones returned to play for Wodonga and also coached Kergunyah and junior football teams in the 1960s. He also managed the Wodonga Little Athletics Club in the 1970s. Mr. Jones was an active member of the Wodonga Historical Society until his death in 2002. He worked not only to collect historical items but to ensure they were properly preserved and displayed. Two of his interests came together when he researched the history of Australian Rules football in the Ovens & Murray League and surrounding districts from its formative years through the 1940s. This publication was titled "Football - Glory Days Gone By". Mr. Jones died in Albury on 13 July 2002.This image is dedicated to a respected member of the Wodonga community and the Wodonga Historical Society.A framed photo of Allan Jones (1935 - 2002)Beneath the image: "Allan Stradling Jones/(Strad)/1935 - 2002)/ A valued member and tireless worker for the Wodonga Historical Society"allan "strad" jones, wodonga community members, wodonga football club

This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.DEPARTMENT OF PUBLIC WORKS, N.S.W. RIVER MURRAY WATERS SCHEME. HUME RESERVOIR. 34. Needle Valves. Some of the needle valves in parts stacked ready for removal by the cableway to their positions on the outlets. There are seven of these, 7 feet 6 inches in diameter. The heaviest single part weighs about 10 tons. New South Wales. August 1927. A needle valve is a type of valve which can be used to regulate flow of a substance, usually either gas or water, through an appliance or system. The unique feature of the value is the inclusion of a small plunger, with a shape akin to a needle.hume reservoir australia, river murray waters scheme, hume reservoir construction