As part of the push to cut electricity costs and diversify supply, the Victorian Government (circa 1930) implemented the conversion strategy from mainly brown coal supply to hydro - electricity. The Kiewa Hydroelectric Scheme became the largest scheme of its kind in the State Of Victoria and the second largest scheme in Australia. Clover Dam and Power Station were built by the State Electricity Commission of Victoria as part of the Kiewa Hydro Electric Scheme from the late 1930's to the early 1940's. This dam was constructed to supply water to feed four turbines (62 mega watts) at the West Kiewa Power Station. This was at the forefront of sustainable "Green" energy. Costs associated with power supplies is still a major incentive of governments, however environmentally friendly alternatives such as wind and nuclear have also made inroads. The Kiewa valley and its surrounding alpine catchment were looked at(Victorian State Government), from the beginning of the twentieth century as a source of alternate power for an ever-increasing demand for electricity by growing population and heavy industrial areas within Melbourne City and State regions. Construction of dams, such as Clover Dam provided the large quantity holding areas of water required to turn the turbines at the various power stations to provide the electricity needed. The impact of these controls by moderating water run-off from the alpine regions is beneficial in reducing flooding from thawing of snow on the alps. This by-product allows agriculture and grazing to be less vulnerable to seasonal flooding thereby resulting in a more stable annual production level.Black and white photograph of Clover Dam with Kiewa River in flood. .5mm white boarder on 3 sides of photo.Handwritten on back of photograph in black pen - Kiewa in flood. Clover Dam.clover dam, secv

As part of the push to cut electricity costs and diversify supply, the Victorian Government (circa 1930) implemented the conversion strategy from mainly brown coal supply to hydro - electricity. The Kiewa Hydroelectric Scheme became the largest scheme of its kind in the State Of Victoria and the second largest scheme in Australia. Clover Dam and Power Station were built by the State Electricity Commission of Victoria as part of the Kiewa Hydro Electric Scheme from the late 1930's to the early 1940's. This dam was constructed to supply water to feed four turbines (62 mega watts) at the West Kiewa Power Station. This was at the forefront of sustainable "Green" energy. Costs associated with power supplies is still a major incentive of governments, however environmentally friendly alternatives such as wind and nuclear have also made inroads. The Kiewa valley and its surrounding alpine catchment were looked at(Victorian State Government), from the beginning of the twentieth century as a source of alternate power for an ever-increasing demand for electricity by growing population and heavy industrial areas within Melbourne City and State regions. Construction of dams, such as Clover Dam provided the large quantity holding areas of water required to turn the turbines at the various power stations to provide the electricity needed. The impact of these controls by moderating water run-off from the alpine regions is beneficial in reducing flooding from thawing of snow on the alps. This by-product allows agriculture and grazing to be less vulnerable to seasonal flooding thereby resulting in a more stable annual production level.Black and white photograph of Clover Dam buildings and Kiewa River. Has a .4cm white border around photograph Printed on bottom left corner of photograph in white - Clover Flatclover dam, secv

As part of the push to cut electricity costs and diversify supply, the Victorian Government (circa 1930) implemented the conversion strategy from mainly brown coal supply to hydro - electricity. The Kiewa Hydroelectric Scheme became the largest scheme of its kind in the State Of Victoria and the second largest scheme in Australia. Clover Dam and Power Station were built by the State Electricity Commission of Victoria as part of the Kiewa Hydro Electric Scheme from the late 1930's to the early 1940's. This dam was constructed to supply water to feed four turbines (62 mega watts) at the West Kiewa Power Station. This was at the forefront of sustainable "Green" energy. Costs associated with power supplies is still a major incentive of governments, however environmentally friendly alternatives such as wind and nuclear have also made inroads. The Kiewa valley and its surrounding alpine catchment were looked at(Victorian State Government), from the beginning of the twentieth century as a source of alternate power for an ever-increasing demand for electricity by growing population and heavy industrial areas within Melbourne City and State regions. Construction of dams, such as Clover Dam provided the large quantity holding areas of water required to turn the turbines at the various power stations to provide the electricity needed. The impact of these controls by moderating water run-off from the alpine regions is beneficial in reducing flooding from thawing of snow on the alps. This by-product allows agriculture and grazing to be less vulnerable to seasonal flooding thereby resulting in a more stable annual production level. Photographs also document early engineering and building techniques used in the construction of dams and power stations during the 1940’s and 1950’s. Note the lack of safety equipment and suitable work attire worn by construction workers on the sites 1. Black and white photograph of Clover Dam under construction. Has a .5cm white border around photo 2. Black and white photograph of Clover Dam under construction showing workmen at work. Has a .5cm white border around photo Written in pencil on back of both photographs - Clover Damclover dam, secv

Ladies fashion shoes made in Fitzroy by Ivan Porter of Goold & Porter Pty Ltd, during the 1940s and 1950s.Worn by Doris Melbourne, wife of Arthur, who worked for the State Electricity Commission of Victoria. They would have attended the many social events that took place in Bogong and Mt Beauty during the construction of the Kiewa Hydro Electric Scheme. They lived at Lower Bogong where the steps of their house can still be seen and later, at Bogong Village and Mount BeautyLadies fashion shoes, black, leather and latex with red insole and resin sole, pointed toes, low stiletto heels. Size 4 Three looped narrow black bands joining front and side of the shoe on the outer edge of each shoeBy Ivan porter'Made by/ Goold & Porter Pty Ltd./ Leather & Latex/ Insole/ Resin Sole (Size) 4 is indented on the sole between the toe and heelfashion shoes; lower bogong; secv; goold & porter shoe manufacturers

Megger as the device was called, is in fact its brand name. It is a device that supplies a DC (direct current as per car batteries) voltage to enable testing of electrical apparatus. This particular device produces 250volts DC when the handle is turned vigorously. If an electrical device, such as a kettle or toaster, blew a fuse or tripped a circuit breaker, when switched on, then it must be checked electrically before any more use. Following the repair of the faulty item a megger would be used to check if either of the AC 240volt plugs leads were touching the metal case (earth). The output leads of the megger would be connected with one to the earth (metal case) and the other to each of the power connections in turn. A good megger reading of 50,000 ohms (resistance) would enable the device to be returned to service. A reading of zero ohms resistance would mean that it would again blow a fuse, and was therefore unsafe to use. In the electrical industry e.g. the former State Electricity Commission, a megger would be used to test lots of similar item in sequence. Because of the vigorous job of winding the handle, two persons were often used to save time. One would crank madly whilst the other shifted the leads. This particular megger is of a small voltage, but other meggers are bigger and have a few ranges of DC voltages able to be selected. The optimal megger for large Generating machines was motor driven megger. This was applied to the device being tested for a duration of approximately 30 minutes with reading of the resistance taken at regular intervals.All equipment belonging to the State Electricity Commission of Victoria was labelled with a metal plaque attached to it. The SECV constructed the Kiewa Hydro Electric Scheme in the Upper Kiewa Valley and on the Bogong High Plains. The scheme began in 1938 and finished in 1961 when this megger was used and also possibly later as the SECV remained to maintain and operate the Scheme. This megger is of significance in relation to the advancement of technology.A rectangular box in dark brown bakerlite casing. It has an agent's plaque fixed to the left of the face and on the right is the marker's recessed stamp. In the middle in a transparent window so the level of ohms can be read. The front also has two recessed fixing knobs in black. On one side is a crank handle with a knob that lifts up and is turned vigorously to create the voltage. The back has four recessed screws and four small leather pads. There is a hole on each side to insert wires. There are two copper insulated wires. The SECV Plaque states: State/Electricity Commission/of/Victoria/ Electrical Engineer's Section/ No.1747 The Agent's Plaque states: H. Rowe & Co. Pty Ltd/Melbourne & Sydney/Sole Agents/in Australia for/Evershed & Vignoles Ltd Maker's states: 500 volts/Megger/Regd Trade Mark/Made in England/Patent No/400728electrical meters, electrical equipment, fuses, safety, state electricity commission of victoria, mt beauty, bogong village

These reading glasses plus the two additional replacement lenses were highly fashionable in the late 1800's and early 1900's due to their light frames ie. wire. They are of light material and are not as obtrusive, or heavy, as horn rimmed reading glasses.This minimisation of the eye wear was to allow the facial features to be presented without any obstructing eye wear, "au naturel". The "light weight" wire connections to nose and ears was to minimise weight upon those physical areas. It was an eye piece preferred by accountants and all forms of "book worms". This was a period when the "written word" was at its peak. This was well before the light enhanced computer screen and at an age where the "written word" was in the majority as compared to the typed word. These reading glasses are very significant to the Kiewa Valley as they provide additional material which supports the "isolational factors" which were prevalent in the 1800's and early 1900's. Poor lighting and lack of available optical technicians in rural areas, required those suffering with eye troubles in these rural areas to go to Melbourne. An advertisement placed by H B Bissel "eyesight specialist" in the "Independent" Newspaper in 1915 on page 3 " Every person's eyes are liable to be affected by some little weakness or other and these weaknesses, if not corrected at once, are apt to assume a most serious aspect as time goes on". This type of advertisement is putting "the fear of God" on those with slight eyesight problems. It also does not factor the poor lighting used by most in rural areas at this point in time. By the mid to late 1950's, electricity in the Kiewa Valley was available to all households and improved lighting helped nighttime readers. These reading glasses, made in Melbourne, highlight the fact that the Kiewa Valley and its region were still reliant on Melbourne based "specialists" and travel to and from these highly professional health practitioners not only involved a long, and time consuming journey, but also an expensive one.The frames of this oval wire reading glasses is made from gold plated copper wire. There are three nose bridges each with a slightly different angle and shape, each has a different magnification. This may suggest that they were in use at different developmental periods during the wearers ages. Each of the three lenses were fixed onto the frame by a screw and fastened directly onto the glass. Two of the glasses have nose "guides/rests" and one without.. The fine wire ear "loops" has a small "ball" feature at its end (to stop the glasses from slipping off the face).personal effects, spectacles, eye fashion, reading glasses

This small, slim case was manufactured to contain reading spectacles in a secure but yet "manageable pocket or purse" environment. It was manufactured to contain reading glasses that would not exceed 12mm in thickness. The product was targeting the "professional" reader ie. accountant, lawyer, business and property managers. Because it was made for a "eyesight" specialist to contain "prescription" reading spectacles the quality had to be of a higher level than cheaper "off the shelf" ones. This case was made and used in the late 1800's and early 1900's.This case, for spectacles, holds a significant position in that it points to a time in history when rural Australian families required to travel long distances to obtain professional "eyesight" treatment which, on the whole, were only available in the capital cities (in this case Melbourne). In the pre 1960's, the greater the distance from capital cities for Australian rural folk to seek professional medical, dental, nose ,eye and throat specialists the greater the time involved resulting in the greater expense. This "isolation" brought about increased costs not experienced by city residences. The quality and durability of this case was a pre-requisite for the Kiewa Valley based resident.This slim spring lid spectacle case has a body of light steel over layered by a fine skin dyed(dark brown) leather coating. The inside, of the case, has a 1mm lip opposite the hinged end (to secure the reading spectacles within the case). The inside is fully covered by a "royal" purple felt (to provide the spectacles with a scratch free enclosure).At the outside base in gold lettering "H.B. BISSELL" underneath "EYESIGHT" underneath "SPECIALIST" underneath "BARKLY st", underneath "FOOTSCRAY"personal effects, spectacles, eye fashion, reading glasses

This pack is made from materials available at the time and was used to carry supplies and equipment for bushwalking and/or cross country skiing. It is designed to protect the contents in all weather and to be as comfortable and practical as possible. The Bogong High Plains was a popular destination for bushwalking and cross country skiing. This backpack is an early example of the equipment used for extended walks and/or cross country skiing. Heavy green canvas back pack with flap at top to cover contents and to attach at base. Sides fold over at the top. The back is attached with zig zag cord with 5 holes down each side. The front piece has 2 pockets with straps to secure them. The sides have a wooden rectangular piece wrapped by canvas to maintain the shape of the pack. There are webbed shoulder straps on an angle attached to the back with adjustable straps. There is a thin metal rod on the outside of each side presumably to enable items to be hung from them. On the inside of the flap: Leon Henry/Trendweth(?)/ West Brunswick/Melbourne/ Victoria/ Australia Previous name and address has been crossed out.backpack; bogong high plains; bushwalking; cross country skiing

This Hookey board was made of metal unlike many made of wood. The Mt Beauty Rural Fire Brigade was established by the State Electricity Commission of Victoria as an 'industry' brigade. When Mt Beauty was handed over to the Shire in 1961, the Fire Brigade became a member of the Country Fire Authority (C.F.A.). Today it is an urban fire brigade.This Hookey board was used by the members of the Mt Beauty Rural Fire Brigade from 1948 when the State Electricity Commission established the brigade. Grey metal round board with edge. 13 metal hooks spaced on front with embossed numbers 1 - 13 under each. A small circular engraved brass plaque under No. 13 and between No.s 9 & 10. Metal chain attached at top (for hanging). Embossed "Hookey"between No.s 1 and 13. Embossed numbers 1 - 13. Plaque "C A V .. Sales" on top. "Melbourne" on Bottom. "Quality Products" in middle. Cream paint splash right of centre and slightly on plaque.hookey; mt beauty; rural fire brigade; entertainment;

The following extract written by Karen Tyers Warrnambool Family history group explains the journey and background of the Warrnambool Pioneer Board. Warrnambool is fortunate to have a photographic record of some of its pioneers. They are commemorated on the Pioneers’ Board. The Pioneers’ Board with its elaborate frame measures approximately 2 metres by 3 metres and holds 204 photographs of Warrnambool’s early pioneers. In 1907 Edward Vidler, secretary of the Warrnambool & District Progress League and Chamber of Commerce and Industry, invited descendants of those who arrived in Warrnambool before 1860 to send photographs of their pioneer ancestors to commemorate the Diamond Jubilee of Warrnambool’s foundation in 1847. A charge of £1 for each photograph was set. Lillian Foyle of Foyle’s photographic studio, was engaged to colour the photographs and undertake the associated artwork. By December 1907 the honour board was on exhibition in Bernard’s Gallery, Melbourne. Unfortunately Vidler left Warrnambool in 1907 with the honour board expenses unpaid. The Progress League refused to take responsibility for the debt and the honour board remained with Foyle’s Studio for 17 years. In 1922 subscriptions were called for and £43 16s 6d was acknowledged. After a final determined effort was made in 1924, the £100 debt was collected and Charles Foyle, Lillian’s brother, accepted settlement of the debt. On 2 May 1924 the honour board was moved from Foyle’s Studio to the Art Gallery. For many years the honour board was in the entrance passage to the public library. After the library was demolished in 1975 the pictures were removed to the Art Gallery where it was restored by the Director of the Art Gallery, Jack Welsh. The board was later stored in an empty front room at Murweh and the dismantled frame stored in an outbuilding. By 1982 the honour board was in the foyer of the City Council offices. During the renovations of the interior of the council offices in 1997 the honour board was moved to the library where it remained until moved to HeritageWorks in March 2014. For a full list of names go to http://www.warrnamboolhistory.org.au/warrnambool-history/pioneers-board/ The Warrnambool pioneer Board is one of those rare items which can claim significance on most if not all of the primary and comparative significance criteria. As a collection of early pioneers in the district it provides a valuable resource for historians and researchers. It gives light to a social scene in the district much of which can be verified from diaries and other items held by the historical society and also available on websites such as Trove. It has relevance to this day with many family historians enquiring of people included on the board. The collation of the board is a story of great interest in itself. While there are images of 204 men on the board the only reference to a woman is Lillian Foyle the artist who was responsible for much of the artistic work on the board. It compares well in size and quality with a number of montages, and collations of images from around the state of Victoria. It is by no means a complete list of pioneers of the district but there are many well- known ones included. They come from a wide range of backgrounds and as such presents a cross section of our earliest settlers in the district from 1840's to 1860’s.Cardboard folder with black and grey mottled cover with 3 metal studs along spine and white paper label with the word negative printed in black on front cover. Inside is a printed index of pioneers with reference relating to board number and negative number. There are three loose strips of negatives and 20 pages with pockets to hold strips of negatives. Up to page 13 have negatives strips inserted. There are 15 large and one small print of some of the pioneers from the board.This negative album was prepared by John A Welsh MBE JP Dip M Eng Director Warrnambool Art Gallery 1/7/1975 to 11/12/1977.There are a number of grey lead notations possibly corrections against some of the names in the index.warrnambool, warrnambool pioneer board, jack welsh, warrnambool art gallery, pioneers of warrnambool, foyles photography, lillian foyle, bernard framers, w mcaree,

This finely crafted skirt has been made at the Fletcher Jones clothing factory. David Fletcher Jones served in World War One and following this had an itinerant hawker's business in the Western District . In 1924 he opened a tailoring shop in Liebig Street, Warrnambool and began to specialise in the production of men's trousers. In 1946 he opened a shop in Melbourne and in 1947 the firm of Fletcher Jones and Staff Pty. Ltd. was registered. In 1948 a clothing factory was opened in Warrnambool and in the 1960s Fletcher Jones shops had extended to other states of Australia and later the merchandise was extended to men's and women's clothing. It was one of the best known businesses in Australia. The Fletcher Jones company was dissolved in 2011. This is a fine example of a Fletcher Jones item of clothing. The Fletcher Jones clothing business was one of the most important businesses ever to have been in Warrnambool and the factory gardens survive as a tourist attraction in Warrnambool.This is a reversible black, grey and white checked woollen, woman's skirt. It is fully pleated on a waist band which can be buttoned either side. There is a zip on the side next to the waist band.THE Two -Way SKIRT by FLETCHER JONES PURE NEW WOOL SIZE 14fletcher jones clothing company, warrnambool industries

This is a woman's kilt (skirt, shawl and pin). Two of the objects were made by the Fletcher Jones clothing company. The Tartan is the Australian tartan which was designed by John Reid, a Melbourne architect, when he entered a competition run by the Scottish Australian Heritage Council. He chose the colours of the Outback as the basis of his tartan. The tartan is design registered in Australia (No. 97439). (Source: District Tartans, P. Smith and G Teall, 1992). This outfit was possibly made around 1990. David Fletcher Jones who served in World War One had a itinerant drapery business in the Western District before opening a tailoring business in Warrnambool in 1924.He began to specialise in men's clothing and in 1946 opened a shop in Melbourne. In 1948 he opened a clothing factory in Warrnambool and formed a new company Fletcher Jones and Staff. The company expanded to all states of Australia and included the manufacture of both men's and women's clothing making it one of the best known clothing companies in Australia. The company dissolved in 2011 This is a fine example of a Fletcher Jones clothing product and comes from a firm which was a dominant industry in Warrnambool and known Australia wide. It has further cultural significance being in The Australian Tartan..1 An orange/tan checked woollen kilt with a pleated skirt and straight panel at the front with a side fringe and a metal buckle It has an adjustable waist with buttons and metal clips. .2 A triangular shaped shawl in the same material as .1 .3 A metal pin or brooch in the shape of a sword and a circular piece with a swan image and a motto ENDURE FORT..1 Fletcher Jones AUSTRALIA'S FINEST CLOTHING PURE NEW WOOL .2 FLETCHER JONES AUTRALIA'S FINEST CLOTHING MADE IN AUSTRALIA .3 ENDURE FORT fletcher jones clothing company, warrnambool industries, australian tartan, tartan, australian tartan kilt, fletcher jones kilt

This dressmaker's model has been made by a New York firm (1971 model) and comes from the Fletcher Jones Factory in Warrnambool. It would have been used for making and displaying ladies' clothing made at the factory. David Fletcher Jones (1895-1977) served in World War One and in the 1920s set up as a travelling hawker selling drapery in Western Victoria. In 1924 he opened a men's wear shop in Warrnambool and manufactured in sute. In 1946 a Fletcher Jones shop opened in melbourne and in 1948 a factory was established in Warrnambool with a new company, Fletcher Jones and Staff begun in 1951. The company initially specialized in men's trousers but later expanded into both men's and women's clothing. It became an Australia-wide company known throughout the country until it ceased in 2011 and the Warrnambool factory buildings were sold.This dressmaker's model is of considerable interest as a memento of the Fletcher Jones and Staff Company, founded in Warrnambool, employing many local people for a great number of years and known throughout Australia for its quality products and pioneering business model as a founder and staff co-operative.This is a dressmaker's model with the body section (bust and torso) having a fabric cover over a wooden core. The top section is bronze-coloured with a silver rim. Beneath the body section is a wire frame and a metal base on castors. The castors are rusty and the fabric is broken in places. Collapsible model 1971 22 WOLF FORM Registered perfect model forms N Y 140 5th Avefletcher jones and staff, fletcher jones factory warrnambool, warrnambool history

These thread spools come from the Fletcher Jones Factory in Warrnambool. They would have been used in the sewing and manufacture of the men's and ladies' garments made at the factory. The Fletcher Jones factory was established by David Fletcher Jones in 1948. David Fletcher Jones (1895-1977) set up as a travelling hawker selling drapery in the Western District in the 1920s. In the same decade he opened a shop in Warrnambool manufacturing men's clothing, specialising in the production of men's trousers. In 1946 a Fletcher Jones shop was opened in Melbourne and a company, Fletcher Jones and Staff, was established in 1951. The company expanded to manufacturing both men's and women's clothing, opening outlets in all States and becoming well-known Australia-wide. The company was dissolved in 2011 and the Warrnambool factory was sold.These items are of interest as a memento of the Fletcher Jones Factory and the Fletcher Jones company, one of the most important businesses ever established in Warrnambool and certainly one of the most cherished by the local Warrnambool community..1 A wooden stand with upright spikes holding 11 spools containing coloured thread (various colours). The threads are on blue and black plastic reels. .2 A wooden stand with upright spikes holding 16 spools containing coloured thread (various colours). The threads are on blue and black plastic reels.fletcher jones and staff pty ltd, fletcher jones factory warrnambool

This hat stand appears to have been made by the English firm of Battersby & Company, a hat manufacturer established in England in the late 19th century. The stand may have been fitted on to the head by the Melbourne firm Ramie Specialty Co. Battersby hats must have been sold extensively in Australia.This hat stand is useful for display purposes and of interest because of its possible composition (ramie)This is a model of a head used for displaying men's hats. The head is made of composite material , originally a gold colour and lined what what may be the vegetable fibre, ramie. The head is mounted on a wooden stand with a stepped base. There are two labels, one on the neck of the head and the other on the back of the stand. The head is chipped and stained, with exposed nails. Battersby Hats Ramie Specialty Co. Pty. Ltd. Melbournebattersby hats, model head stand, vintage men's clothing, ramie

This suit was made to order in 1975 for Ted Henry at a Fletcher Jones factory, probably the one in Warrnambool. The other items were obtained at the same time. David Fletcher Jones began his business by opening shops in Liebig Street Warrnambool in the 1920s. His Man's Shop sold suits and overcoats and manufactured men's clothing on site. In 1946 a Fletcher Jones shop was opened in Melbourne and a factory was opened in Warrnambool in 1948. The Fletcher Jones and Staff Company expanded and became well known throughout Australia for the quality of its men's and women's clothing. The Company ceased business in 2011. The surname "Henry" is well known in Warrnambool and district. These items are important mementoes of Fletcher Jones and Staff one of the most significant Australian businesses originating in Warrnambool..1 Carry bag, oblong shaped made of pale orange cloth with full length white zip and dark brown edging and stitching It has a maker's label on the interior. .2 Black plastic clothes hanger with suit maker's name and logo .3 Silk and cotton tie in black, beige and tan broad stripes. It has two labels attached. .4 Man's trousers. The trousers are made of wool and polyester woven pattern in brown. grey and tan. There is a metal zip, The pockets have cream cloth lining . There are two labels. There are loops for a belt. .5 Man's suit coat made of the same material as the trousers (above). It has three butttons on each sleeve and two on the front. It is fully lined with brown cloth and cream lining on the sleeves. It has a maker's label. There is some padding in the shoulders. There are two internal pockets and three on the exterior.Celsius 30 A woolblendmark fabric developed for summer 80% new wool 20% polyester Henry L. 30.6.75 654 silk 35% cotton MADE IN ENGLAND.ted henry, fletcher jones and staff company, fletcher jones factory warrnambool, men's clothing

This box contains maintenance equipment for a Remington typewriter. The Remington company was founded in U.S.A. and it produced the world’s first typewriter for commercial use in 1873. In 1886 the Remington family business was sold but the name was retained and typewriters with the Remington Rand brand name were sold from 1927 on. Typewriters have now been replaced by computers. This box of equipment belonged to Dr Horace Holmes who would have used a typewriter in his medical practice in Warrnambool in the first half of the 20th century and perhaps would also have used a typewriter in the activities of the many community groups with which he was associated. Horace Iles Holmes (1877-1959) was born and educated in Tasmania and he completed a medical degree at the University of Melbourne. He commenced a practice in Warrnambool in 1906 and was the honorary Medical Officer at the Warrnambool Hospital and Warrnambool’s Health Officer. His practice was at ‘Ierne’ at the corner of Spence and Kepler Streets. He was an early member of the Royal Australian College of Surgeons and was prominent in community affairs (foundation President of Warrnambool Rotary Club, a member of the Warrnambool Masonic Lodge for over 50 years, a Warrnambool Hospital Committee member, a long-term Trustee of the Warrnambool Methodist Church and President of the Lyndoch Hostel for the Aged Committee. Dr Holmes also had agricultural interests and enjoyed fishing, bowls and golf. This box of typewriter equipment is of interest as an item in the collection of Horace Iles Holmes, a doctor who was prominently associated with the professional and community life of Warrnambool for over 50 years. This is a rectangular-shaped black cardboard box with a detachable lid. The box contains eight items used for typewriter maintenance. They are a glass bottle containing typewriter oil, a round metal oil dispenser, a small metal hook, a small metal spanner, a metal wire brush, and three bristle brushes, one with a bone handle and one with a wooden handle enclosed in cellophane. The box is somewhat stained inside. On a brush: ‘Made in U.S.A. bristle’ On the glass bottle: ‘Specially refined typewriter oil, Chartres Pty Ltd 375 Collins St. Melbourne Australian Built Remington Typewriters Phone 9100 (8 lines)’ typewriters, remington, dr horace holmes, warrnambool, history of warrnambool, office equipment

This badge has been produced as a fund-raiser for the Red Cross in Victoria. Swiss-born Henri Dunant founded the Red Cross in the 1860s and it has now become an international humanitarian organization and a community service charity assisting particularly in times of war and natural disasters. The Red Cross in Victoria dates from 1914 and each year funds are collected from the public to assist the organization. This badge is an example of fund-raising for the Red Cross in Victoria.Circular badge with red border, white background and red cross in centre, pin clip on back.PATRICK BROS. MELBOURNE (Badge) MADE IN GREAT BRITAIN (Clip) red cross, swiss-born henri dunant, history of warrnambool

These documents concern the property in South Warrnambool, Jetty Allotment 7, Section 4. They include a search made of the title of this property in 1937 and information on later purchasers of the property. The first owner of this property was James Cust who purchased it in April 1853. James Cust (1815-1860) came from Ireland to Australia in 1841. From 1847 on he farmed first at Woodford and then moved into Warrnambool and began land speculating.. In 1856 his property was valued at £20,000 but by 1858 he was declared insolvent following the insolvency of his financial backer, William Bateman and his properties were sold. He died in 1860 following an accident at a Ballarat gold mine. Other notable Warrnambool identities who owned this property on Pertobe Road included Thomas King, Christopher Beattie, Thomas Goodall, William McMahon and Alan Lane.These documents are of interest as they detail the history of a property in Warrnambool up to the 1960s. They are also an example of the type of property once owned by James Cust, an important early land speculator in Warrnambool. These are nine loose sheets of paper concerning a legal search made of a block of land in Warrnambool and later documents on the same property The papers contain handwriting in blue and black ink and pencil and one red stamp. One of the pages is an invoice for the charge made for the search.‘Searched 25/5/37 W.D. Richardson Titles Searcher 418 Little Collins Street Melbourne C1’james cust,, history of warrnambool

These are souvenir medals of the Warrnambool Industrial and Art Exhibition of 1896-7. This exhibition organised by a local committee under the chairmanship of the Mayor, Walter Hickford was one of the most important events in Warrnambool's history. It ran for three months and was said to have attracted 70000 visitors. It was held in Liebig Street and utilised both the civic centre buildings and temporary buildings erected for the event. It had several exhibition courts featuring art worksand business exhibition stands, competitions,entertainments and visiting experts in various fields. These medals were made at the exhibition at the stand of Stokes and Son. Visitors to the exhibition were able to get a gold silver or bronze medal made while they watched and the medal was then perforated ready to put on a watch chain or pendant. Thomas Stokes came to Australia in the 1850's and established a successful business in Melbourne manufacturing buttons, medals and tokens. The business was called Stokes and Son following a fire in 1893.These medals are of great significance as a memento of an important event in Warrnambool -The Warrnambool Industrial and Art Exhibition of 1896-7. Medals such as these would have been in the homes of many residents of Warrnambool and district and beyond after 1896..1 This silver circular medal has text around the outer rim and an image of Queen Victoria on the reverse. On the obverse is text and an image of the Warrnambool Exhibition building erected for the occasion. The medal is secured by a red thread , button and clear tape to a piece of card. On the card is a hand drawn sketch the Warrnambool Exhibition building and a hand drawn sketch of a profile of Queen Victoria . .2This silver circular medal has text around the rim and an image Warrnambool Exhibition building on the reverse and on the obverse a stylised coat of arms topped by the rising sun . Inside the field is a sailing ship, a pick and shovel , a sheep and sheaf of wheat .1 on the Reverse : around the rim, Struck at the Exhibition mint. On the obverse : Industrial exhibition 1896 Warrnambool. .2 On the obverse : Industrial exhibition 1896 Warrnambool.warrnambool, great exhibition of warrnambool, 1896 exhibition warrnambool, warrnambool exhibition medal

This is a car picnic set made by the English firm of G. W. Scott and Sons who were producers of wickerwork crafts, basketry and luxury leather goods. The business was founded in 1661 and ceased operations in 1967. The picnic set belonged to Dr Horace Iles Holmes (1877-1959) who was born and educated in Tasmania and completed a medical degree at Melbourne University. He commenced a practice in Warrnambool in 1906 and was the Honorary Medical Officer at the Warrnambool Hospital and Warrnambool’s Health Officer. His practice was at ‘Ierne’ at the corner of Spence and Kepler Streets. He was an early member of the Royal Australian College of Surgeons and was prominent in Warrnambool community affairs (Foundation President of Warrnmbool Rotary Club, a member of the local Masonic Lodge for over 50 years, Warrnambool Hospital Committee member, long-term Trustee of the Warrnambool Methodist Church and President of the Lyndoch Hostel for the Aged Committee). Dr Holmes also had agricultural interests and enjoyed fishing, golf and bowls. He also had a motor car and this picnic set would have been used for family picnics. This picnic set is of considerable significance because: 1. It is a good example of the luxury picnic sets owned by more affluent people in the 1930s and 40s. 2. It has important local provenance as it belonged to Horace Holmes, a doctor associated with the professional and community life of Warrnambool for over 50 years. This is a rectangular wooden box with a leather covering. It has metal hinges on the corners of the box and two two metal catches on the side with a leather belt and metal buckle on one of these catches with one leather belt missing on the other side. These leather straps were to attach the picnic box to the running board of the car. There are also two metal catches or locks on the front of the box. Inside the box there is a white lining with a plaited wickerwork insert containing spaces for the following: 1. large china container with a silver top 2. smaller metal container with a silver lid 3. small rectangular metal tin with a silver lid. This container still has some loose tea leaves inside 4. four china cups 5. two circular china dishes for jam and butter 6. four china saucers 7. one glass bottle with a silver top 8. one metal phial, silver-coloured 9. one amber-coloured glass bottle (probably not an original) 10. four nickel silver spoons 11. three metal forks 12. three white enamel plates, blue edged Numbers 10,11 and 12 are held in place by leather straps on the inside of the lid of the box 13. two loose metal straps 14. one metal kettle with a handle with cane strapping, a brass lid, a brass spout with an end chain and a metal inscription 15. The kettle is sitting in a metal tray which has a lighting mechanism to heat the water The picnic set has some rusted metal catches on the exterior of the box and the leather is very stained and torn in places. ‘Remove screw before lighting G.W.S. & S ‘ ‘Coracle brand’ antique luxury picnic set, dr horace holmes, history of warrnambool

This pair of jeans comes from the Fletcher Jones factory in Warrnambool. David Fletcher Jones (1895-1977) served in World War One and in the 1920s set up as a travelling hawker selling drapery in the Western District of Victoria. In 1924 he leased three shops in Liebig Street Warrnambool and in 1928 he moved the business to the corner of Koroit and Liebig Streets with his Man’s Shop. He manufactured men’s clothing on site. In 1931 a new set of buildings was erected on the site and Fletcher Jones moved into the new building. In 1946 a Fletcher Jones shop was opened in Melbourne and in 1948 a factory was opened in Warrnambool with a new company Fletcher Jones and Staff established in 1951. This company became known Australia-wide, firstly for the production of men’s trousers and later for both men’s and women’s clothing. By 2011 the factory was sold and the company dissolved. These jeans are retained as an example of the clothing made at the Warrnambool Fletcher Jones factory. The Fletcher Jones clothing company was one of the most important businesses in Warrnambool in the 20th century. This is a pair of blue cotton jeans pants with yellow stitching and a metal zip The garment has four pockets. The back pocket has the maker’s label and there are two labels attached to the inside. The front inside top section is lined with white material. ‘Fletcher Jones Australia’fletcher jones clothing company, history of warrnambool

These shorts come from the Fletcher Jones clothing factory in Warrnambool. They have never been worn. David Fletcher Jones (1895-1977) served in World War One and in the 1920s set up as a travelling hawker selling drapery in the Western District of Victoria. In 1924 he leased three shops in Liebig Street Warrnambool and in 1928 he moved his business to the corner of Koroit and Liebig Streets. He manufactured men’s clothing on site with the business known as the Men’s Shop. In 1931 he moved into a newly-erected two-storeyed building on the site. In 1946 he opened a store in Melbourne and in 1948 he established a clothing factory in Warrnambool with a new company set up in 1951 – Fletcher Jones and Staff. This company became known Australia-wide with its production, firstly of men’s trousers and later both men’s and women’s clothing. By 2011 the factory was closed and the company dissolved. These shorts are of interest as an example of an item made at the Fletcher Jones factory in Warrnambool. The Fletcher Jones Clothing Company, known throughout Australia, was one of the most important industries in Warrnambool in the 20th century. These men’s shorts are made of polyester and viscose and are light brown in colour. They have an elasticised waist band with five buttons and a corded lining, three pockets and a nylon zip front opening with a metal fastener. The shorts have two labels stitched into the inside of the garment and one paper label attached to the shorts by a nylon clip. ‘Fletcher Jones Australia’fletcher jones factory, history of warrnambool

These dinner plates were used at the Criterion Hotel in Kepler Street, Warrnambool, about the mid 1900s. The Criterion Hotel was opened in 1872 with the first licensee, John Tate. The Humm family was associated with the hotel from the 1880s to 1919 and members of the McGennan family were licensees and owners of the hotel for over 50 years in the 20th century. The hotel closed in 2008 and the building was demolished in 2013.These plates are of great interest as excellent examples of the dinner plates used at the Warrnambool Criterion Hotel in the mid 20th century. The Criterion Hotel was a Warrnambool landmark for over 130 years.These are two white vitrified china plates. One is slightly smaller than the other but they are both dinner –plate size and made for hotel use. They are circular in shape with a wide outer band and the base or body of the plates slightly recessed. The name of the hotel is printed in red on the side of the plates in an oval decorative pattern. Details of the manufacturer and supplier are printed on the bottom of the plates. There are few stains or markings on the plates, suggesting they have been little used‘Criterion Hotel Warrnambool’ ‘Globe Pottery Co. Ltd. Cobridge England Vitrified’ ‘John Dynon & Sons Melbourne’criterion hotel, warrnambool, history of warrnambool

This plate comes from the Commercial Hotel in Warrnambool. This hotel, situated on the north west corner of Liebig and Timor Streets, Warrnambool, was established in 1865. It was built by Thomas Mickle and the first licensee was Charles Anderson. From 1928 on the O’Dwyer family was associated with the Commercial Hotel, either as licensees or owners, for fifty years. The plate would have been first used during the times when Patrick O’Dwyer was the licensee – 1928-1931 and 1932 to 1934. Today the Commercial Hotel still trades as the Whalers Hotel.This plate is of interest as it is a memento of the 1920s and 30s when Patrick O’Dwyer was the licensee of the Commercial Hotel. This hotel, trading today as the Whalers Hotel, is the oldest hotel in Warrnambool and a prominent landmark in the city. This is a white china plate (dinner plate size) with the inner section slightly recessed. The plate has a black line around the outer rim and initials and a hotel name in a scroll pattern on one outer edge. The names of the maker and supplier are on the base of the plate and the top of the plate is somewhat stained. ‘P O’D Commercial Hotel Warrnambool’ ‘Made expressly for John Dynon and Sons, Melbourne Vitrified Globe Pottery Co. Ltd Cobridge England’ commercial hotel / whalers hotel, warrnambool, history of warrnambool

This plate comes from the Hotel Mansions in Warrnambool. This building was opened in 1890 as the Grand Ozone Coffee Palace (a temperance hotel) and was at the corner of Koroit and Kepler Streets in Warrnambool. It was built by a company of local businessmen and leased out. In 1891 the Coffee Palace was granted a wine licence. In 1895 Thomas Randall was the proprietor of the building and it was re-named the Ozone Hotel. The building was closed in 1915 and re-opened in 1920 as the Hotel Mansions. In 1923 the Hotel Mansions became a fully-licensed hotel. In 1929 it was destroyed by fire and the present day Hotel Warrnambool was built on the site. This plate is of considerable significance because it is one of the few items we have from the Hotel Mansions in Warrnambool. The Grand Ozone Coffee Palace/Ozone Hotel/Hotel Mansions was the grandest building ever erected in Warrnambool. Its destruction by fire was a major loss to the city. This is a white plate made of vitrified china (bread and butter plate size). It has a charcoal-black rim around the outer edge and a black monogram and scroll on the outer edge of the plate. There are a couple of small stains on the upper part of the plate and on the base. There is information on the maker and supplier on the base as well as a crown symbol.‘H.M. Warrnambool’ Grindley Hotel Ware England Vitrified’ ‘Loftus Moran Pty Ltd Melbourne’ grand ozone coffee palace, ozone hotel, hotel mansions warrnambool, temperance hotels in warrnambool, history of warrnambool

This cup was produced by Ken Sadler as a souvenir of the 150th anniversary of the settlement of Warrnambool. Ken Sadler was a potter in Liebig Street, Warrnambool for many years (end of 20th century and beginning of 21st century). Warrnambool was founded as a planned town in 1847 to provide port facilities for the produce of squatters who had settled in the area. The town centre was surveyed by William Pickering at the request of Superintendent La Trobe of Melbourne and the first land sales were held in Melbourne in July 1847. The celebrations to mark the 150th anniversary of Warrnambool included concerts, race meetings, church services and the erection of an anniversary tablet on Cannon Hill. Ken Sadler, a well-known Warrnambool potter, made 500 of these cups which are now collectible souvenirs of the city’s 150th anniversary celebrations. This one retained by the Warrnambool and District Historical Society is numbered 189. The 150th anniversary of the founding of Warrnambool was an important event in the city’s history.This is a ceramic cup with a round base and larger rounded body with a round overhanging rim at the top opening. The cup is mottled green with an impressed image of a ship and lettering in white, gold and brown. There is some lettering on the bottom of the cup.‘Warrnambool 150th Anniversary 1847-1997’ ‘Sadler 97 189/500 Warrnambool’ warrnambool’s 150th anniversary, history of warrnambool, ken sadler, warrnambool potter

This man’s dress box contains accessories that a man would use, perhaps in a formal situation – bow ties,buttoning studs and detachable collars. The contents of the box may not be what was originally in the box. Bow ties and studs are still used on occasions but detachable collars are no longer in vogue because wash and wear shirts are freely available. Both of the companies which made the detachable collars, Pelaco and Cremorne, were based in Richmond in Melbourne. The Warrnambool jewellery business of M. Salamy and Son, has the known dates, 1912 to 1938. There were two Salamy shops, one in Timor Street, opposite the Post Office and one at 179 Liebig Street. This box and contents are retained because they are reminders of accessories men used in the past, especially for formal occasions. Also, one of the items came from the well-known Warrnmbool jewellery business of M. Salamy and Son..1 This is a circular-shaped leather box with a lid attached by stitching and a strap and a metal buckle for closing the box. Inside the box is a blue cardboard lining. The leather is scuffed. .2 & .3 These are two black cloth bow ties with metal clips at the back. The ties are housed in a blue wooden box. .4 These are seven elasticised bands for holding back shirt sleeves. Two of these are covered with red and blue cloth and five are made of silver-coloured metal .5 & .6 These are two white detachable collars. They are somewhat stained. .7 These are four metal studs with white inserts. .2 The box is marked ‘M.Salamy & Son, Jewellers’ .5 ‘Pelaco Best Quality Made in Australia’ .6 ‘Cremorne Collar Co. Melbourne’ men’s accessories, history of warrnambool, detachable vintage collars, winged detachable collars

This button has come from an item of clothing made by George Wardrop, a well-known Victorian tailor who was apprenticed to a Mr J. Jones in Smith Street Collingwood in the late 19th century. George Wardrop was a partner in the Jones firm for seven years before opening his own tailoring business in Collingwood and later in Northcote. The business expanded, with a major store in Melbourne established in the 1930s, (Wardrops, My Tailor) and other stores opening in suburban and regional areas in Victoria. The business lasted until the early 1970s. This button is of interest as it was found in a Warrnambool garden and perhaps came from an item of clothing owned by a local resident and purchased from a Wardrop tailoring shop early in the 20th century.This is a round buff-coloured button with an eyelet and printing around the button edge. The item is slightly bent and discoloured.‘G. Wardrop Collingwood’wardrop, tailor